Can I use CS5 on windows xp sp3? [was: install]

can i use cs5 on windows xp sp3

It is highly likely based on a cursory look at the page linked below. If you find the software you wish to install listed in the page linked below you can check to see if it is supported on the system you wish to install it:
http://prodesigntools.com/products/adobe-cs5-system-requirements.html

Similar Messages

Qosmio F60 - Can I use my other Windows 7 disk to install?

I'm buying a Toshiba Qosmio F60 within the next few days and I saw that it comes with a 64bit restore partition but preinstalled with 32bit. I was wondering if I can use one of my other Windows 7 home premium 64bit oem disc's to install windows 7 and use the product key on the back without voiding warrenty and have it pass validation?
Because I like a nice clean Windows install without all that other stuff like office trials and oem software.
Not sure if this is the right place or not but sounded right.

if its the same edition of windows it shouldent matter should it? and uninstalling things tends to leave a messy windows install, i will install a few of the utilities that the defualt one comes with but alot of the stuff new PC's come with can be hard to uninstall and tied into each other.
becouse it comes with a recovery partition with win7 home premium 64 bit presumably OEM, i understand that windows oem for large companies eg toshiba use a file ti activate that matches up to the specific hardware of the pc, but u should still be able to activate it online or on the phone the normal way as long as its the same edition and pc should u not?

Can I use Photoshop Cs5 with windows 8? was told by tech guys at best buy that we couldn't.....

can I use Photoshop Cs5 with windows 8? was told by tech guys at best buy that we couldn't.....

You might want to check this thread. Some have had success with CS5 on Windows 8, others not so lucky.
http://forums.adobe.com/message/4840878
You can try and see for yourself,but I don't think the Best Buy techs were trying to upsell you.
Gene

I can't open CS5 in windows 7 it tells me "Programm is locked or you are not legitimated". Bridge and Camera draw are working ok

I can't open CS5 in Windows 7. It tells me "application is locked or you don't have legitimation". Bridge and Camera Raw are OK.

Hi,
     thank you for your answer.
     The original Text photoshop showing me is the following:
     Konnte ein Arbeitsvolumen nicht öffnen, weil die Datei gesperrt ist
oder Sie keine ausreichende Berechtigung haben. Heben Sie den Schutz
der Datei mit Hilfe des Befehls 'Eigenschaften' im Windows Explorer
auf.
     Sorry I can tell you this only in German.
     After Installation the Version 64 Bit couldn't work because of this
sentence (Windows 7 has 64 Bit Version). The 32 Bit Version worked
without problems. The next day both versions didn't work because of
this Informatiom. Bridge and Camera raw workinjg perfect but photoshop
(CS 5) is blocked.

How can i use messages on windows

im trying to use my imessage on my laptop is there like a software that doesnt require jailbreak to send messages on the laptop?

ryan10132 wrote:
how can I use messages on windows
You can't.

How can you use symbols in Windows 7 on a IMac 27

How can you use symbols @$€%£¥ in Windows 7 on a IMac 27 mid 2011? I tried what was normally done on Windows and got nothing. Alt plus numbers and nothing happens, what am I missing?

Frosted Flake,
Are you referring to an equivalent to the Windows Character Map Application (charmap.exe) that allowed you to see the various characters available in each font, and then give you an ALT-nnn number you could key to use the character you wanted ?
If so you can use the Special Characters from the Edit menu of most applications. Once you have located the character/symbol you want double click it and it will be entered wherever you cursor is located in your application.
Further information can be found here :
http://support.apple.com/kb/PH3871
Hope this helps
Cheers
AF

Make a presentation with videos that can be used on a Windows PC.

I need to make a presentation that can be projected from a PC using Windows. I am using Keynote 09, and some of my "slides" are short videos in m4v format. How can I burn the presentation onto a CD so the CD can be used by a Windows PC?

He can't upload new photos for BannerZest as they have to be added to the application and included in the script.
Its possible for him to upload movies and slideshows to a folder on the server so that you can provide a hyperlink to the movie on the website so that it opens and plays in a new browser window.

How can i use adobe design trial? i was sucess to install adobe download assistant

how can i use adobe design trial? i was sucess to install adobe download assistant

After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_

I can't use my ID to shop, it was locked please open again

I can't use my ID to shop, it was locked please open again

For assistance with a disabled account, see this support article:
http://support.apple.com/kb/TS2446
If that doesn't help, contact iTunes support via the link provided toward the bottom of the page.
Regards.

Vist OS was deleted when Windows 7 Upgrade was installed

Toshiba Satellite L505D-S5965. Vista OS was deleted when Windows 7 Upgrade was installed and failed to activate, because the Internet was down for a week. Now there is just the Toshiba basics but no OS on the hard drive. No Vista and no 7. The problem now is that my 7 is an upgrade and cannot be installed on a computer that does not already have Vista installed, and my Toshiba Vista recovery discs also won’t work unless Vista is installed.
I presume that reinstalling Vista will then enable me to reinstall the 7 upgrade and all will be well. However, it seems that I will need a full version of Vista. Maybe my Toshiba Windows Vista serial number will work or maybe I do not even need to activate Vista. I only need Vista on the drive long enough to install and activate 7.
Where can I find a Vista download or disc that will do the job?
Maybe it will be easier to take the computer to a tech shop and let them install a temporary Vista? If I don’t need a serial number or wish to keep Vista I certainly do not want to buy Vista.
Am I on the right track or is there another solution?
Les

It may be an upgrade disc but you can install Windows 7 thru it.
I'll sum it up:
Back up any files that you need.
Insert the Windows 7 Upgrade disc.
Turn computer off.
Power on the computer then hold F12 right away until you get a boot menu.
Select CD/DVD using the arrow keys and press enter.
follow thru the install process.
You can only do a custom install.
Make sure to have the Windows7 product key ready.
After installing windows 7, run the Toshiba Software Installer to install toshiba's own software and drivers.
For detailed info, read more at:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletin.jsp?ct=SB&soid=2455564&ref=EV

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

If you do not own a license for CS5 there is not much you can do to get it thru Adobe. They only sell current versions of their software (CS6 or Creative Cloud). You would need to find a third party vendor and take your chances with them.
If you do own a CS5 license you can download the software thru the following page and use your serial number to activate:
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

Can I use an OEM Windows 7 64bit with Boot Camp?

I would like to put Windows 7 Home Premium 64 bit on my Mountain Lion 10.8.3 system using Boot Camp 5. Can I use an OEM version of Windows or not?

You can, but it's illegal. A OEM version is designed to be installed on a new computer, not on a computer with an existing operating system, so you can install Windows from there but you should know that's illegal, so Apple doesn't support it. To do this legally, you have to get a full Windows 7 disc version and use it to install Windows.
If you need the steps to install Windows on the MacBook, read > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

Want to compare Cs5 with CC trial. Can't use Cs5 now is there a way to use both?

Downloaded the photoshop CC trial and want to see how some of the features differ from Cs5. Specifically the up sampling. I can no longer use CS5 to compare up sampling. Is there a way to get CS5 to work at the same time?

You can use both simultaneously -- they install separately and run separately.

How can I use the MS Windows Key in Linux

Hello!
I'm using KDE 4.3 and want to use the MS Windows Key to open the KDE start menu.
I tried to add the Windows Key by pressing as a "KDE Application Launcher" hotkey, but the window key wasn't accepted as a hotkey.
Is it possible to add this key as a hotkey?
Thanks for help!
Best regards,
Flasher

I have the following line in my .xinitrc:
/usr/bin/xmodmap -e "keycode 133 = F30" &
...where keycode 133 is my win key. I assign it to F30 (it can be any number besides 1-12, I guess), and then it's just a matter of configuring escape key (in your case, it'll be kde start menu) to F30.

Can I use CS5 on windows xp sp3? [was: install]

Similar Messages

Maybe you are looking for