Can I use CSS, htmlTags and Alt tip for text with TLF?

I want to know if it applicaple to use CSS style sheet to format TLF Text?
is it Applicaple to use html tags instead of text with TLF?
is it applicaple to add alt (tooltip when I over some words) with TLF?

Thank you Robin for helpull answer, yes that what I meant by html, I will check the TextConverter Class.
I asked about CSS because my Manager want to control the Format of the text inside Flash using The CSS.
is there a way to format the TLF Markup, or what is the best suggestion instead of CSS?
I didn't try before to add any new capapilities to the architecture, if I want to start adding this what is the place to start from or any done example that demonstrate it.
I am using Flash CS4 not Flash Builder nor Flex.
thank you again for your helpful answer.

Similar Messages

[svn] 3148: You can now use CSS styles to set the default text format for TextView.

Revision: 3148
Author: [email protected]
Date: 2008-09-08 15:01:15 -0700 (Mon, 08 Sep 2008)
Log Message:
You can now use CSS styles to set the default text format for TextView. It no longer has any formatting properties. It supports the entire set of Gumbo text format styles.
SkinnableComponent and Group now also support all these styles. However, skins such as ButtonSkin, TextInputSkin, and TextAreaSkin continue for now to specify instance styles on their TextBox, TextGraphic, and TextView, in order to give them a Gumbo look rather than a Halo look. So if you try setting, for example, the fontSize on the Application, it doesn't yet affect the text format of a Button, TextInput, TextArea, etc. unless you remove the instance style in the skin.
Reviewer: Glenn
Bugs: -
QA: Lots of new stuff to test!
Doc: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextArea.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextInput.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextView.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextBox.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextGraphic.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/TextGraphicEle ment.as

Nevermind guys - I did it using the 'rb_on.selected' command on the "on" radio button if the .txt file variable was "on", else the "off" radio button is selected.
Thanks for taking a look though!
Shaun

Can I use CS5 Student and Teacher Edition for pc, on a Mac instead?

I have Adobe Creative Suite CS5 Student and teacher PC version and am looking to possibly upgrade from a pc laptop to a 27" imac.
Is it possible for me to still use the software for the imac. If so, what are my options please?

Hi germini,
Yes, Student and Teacher Edition products can be used commercially on your privately owned computer. They may not be resold.
See - Education FAQ
^Ani

Can I use Indesign to create an ePub for iPad with expandable images?

Hello everyone! I'm creating a book for iBooks on the iPad. It is a basic book that has short chapters of text with pictures. Reading Terry White's, the Adobe evangelist, blog I saw that his attempt with InDesign seemed straight forward, without a need for html skills (which I don't have.) So I would make the investment in InDesign if it is suitable.
BUT! I would like to add an extra feature that I have seen in some iBooks: When you double-tap an image the text disappears and the image expands and fills the page. And when you double-tap the image again it goes back to normal. Can this be done in InDesign? How?
I'd appreciate any help.
Thank you!

Size your image so that the longest dimension is 1024 pixels.
Screen size of iPad is 1024 x 768.
In iBooks, when a user double-taps on an image, iBooks will open the image in full-screen view and scales the image to its largest dimension.
In normal book view, iBooks displays all images at their maximum size unless they're larger than the iBooks page, in which case they are displayed to the max width or height of the page (until double-tapped on).
You can constrain the image size in iBooks with certain HTML coding. (Unlike other epub display software and devices, iBooks ignores CSS height and width instructions unless you make specific use of a <div> tag.)
More info here:
http://www.pigsgourdsandwikis.com/2011/04/resizing-images-in-epub.html
http://carijansen.com/2011/06/07/epub-export-relative-to-page-size/

How can I use the F14 and F15 key for a shortcut?

Hi folks,
I've been trying to assign custom shortcuts to the F14 and F15 keys of my keyboard (wired, full sized type) on my Mac Pro 2008 running Mac OS X Lion 10.7.2 however every time I try to assign those keys to an app's "Record a shortcut" function I get the same error dialog from the OS:
The key combination F15 can't be used!
The key combination "F15" can't be used because it's already used by a system-wide keyboard shortcut. (If you really want to use this key combination, most shortcuts can be changed in the Keyboard & Mouse panel in System Preferences.)
(note: the same happens with F14, F13 and lower as well as F16+ work fine however)
I have looked into my system settings as the dialog suggests however there isn't a single shortcut that uses F14 or F15 anywhere in any of the shortcut groups.
If any of you have an idea of how I could "clear" or even just find out what these keys are currently being used for/by that would be super… they don't seem to do or trigger anything when I press them.
Here is another screenshot of the issue:
Note: This is not app specific, I've tried this in various apps and every time I get the same Mac OS popup.
Thanks for reading,
I look forward to your ideas and insights!

Hi,
Use the step reference to get a PropertyObject reference using the Step.AsPropertyObject. With this PropertyObject reference you can then get the values of Limits.High and Limits.Low using the PropertyObject.GetValNumber() method.
Limits.High and Limits.Low will be the lookup string for the PropertyObject.GetValNumber() method.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

I have an external hard drive that is partitioned three ways. I have made an install disk out of one partition. How can I use this partition, and not the whole drive with bootcamp assistant?

See title.
When the drive is plugged in, boot camp assistant says that no installer can be found, but the application doesn't list the three separate partitions like finder/disk util does.
I am using a mid-'12 retina mac running os X 10.9
Hopefully this is an easy fix.
Thanks in advance.

Hello,
I have just experienced the same thing!
Although my external drive shows in Disk Utility, it does not show in Finder.
And the Verify/Repair buttons are also greyed out.
Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
I was wondering if you solved your problem, & if so, would you share your solution.
I´m afraid to Erase in case I lose all my Data on the drive.
Thanks in advance for your reply!

How can I use the battery and let it be perfectly healthy?

Hello everybody!
I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
(Right now I'm performing the battery calibration)
I'd like to know how can I use the battery and let it be perfectly healthy.
For instance,
1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
2) I usually use to calibrate the battery once a month... Is it a good thing?
Thanks!
Andrea

Everything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
http://discussions.apple.com/thread.jspa?threadID=1764220

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both

Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both. Want to give one to wife.do I need to open a new iTunes account for her?

bashepard wrote:
Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both.
Yes, No problem at all.
Want to give one to wife.do I need to open a new iTunes account for her?
No - you can share the same iTunes account (my wife and I share the same account). But when you sync the iPads, just remember to select the correct content for her iPad and the correct content for your iPad.

Can i use this download and install on multiple computers?

Can i use this download and install on multiple computers?

I assume you're talking about the Lion installer? If so, yes, you're allowed to use it on any machines authorized with your Apple ID (which I believe means a maximum of five machines). This is, of course, meant for family use... I'm not sure about business use, but I'd suspect you need one copy per machine at a business. If you're in that situation, you may want to wait for the $69 Lion flash drive Apple will be releasing next month sometime, as that won't be tied to an Apple ID. But check with Apple to be sure on that.

Can I use Adobe Premiere and Photoshop (with cloud license) on more thn one computer.

Can I use Adobe Premiere and Photoshop (with cloud license) on more than one computer? WHen on the oroad I would like to use it n my laptop, while I installed on the desktop.

Hi Kasiah,
As per the EULA accepted while you launch Adobe applications you can download & install on 2 systems but can use on one at the same time.
Source:http://www.adobe.com/in/products/creativecloud/faq.html
Let me know if you have any questions on this.
Cheers~!
-Mandhir

I have a macbook pro with 10.6.8 on it but I need to do a clean re install and my CD is 10.4.6. Can I use the CD and then are my OS updates to 10.6.8 free?

I have a macbook pro with 10.6.8 on it but I need to do a clean re install and my CD is 10.4.6. Can I use the CD and then are my OS updates to 10.6.8 free?
Also can I use iMac OS install disks on a MacBookPro?

You will have to buy Snow Leopard:
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order. You also should find it at your local Apple retailers.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.

How can i use this sript and loade another movie?

Hi there, i used the following script to load a movie from the server;
var request:URLRequest = new URLRequest("url string");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
How can i use this sript and loade another movie? Can someone help me please?
[edited by moderator]

Sir, I changed it from:
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Dir.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
to
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Warning.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
When i expord the movie i get the following error.....
Scene 1, Layer 'Layer 3', Frame 1, Line 6 1151: A conflict exists with definition request in namespace internal.

Can I use a select and update statement in a single jsp file?

I want to update the BUY table everytime I would add a SELL transaction.....I want to minus the stocks that I sold to those that Ive bought before.....
note: I used a seperate table in BUY and SELL transaction
After I Have added a transaction, I want to update the buy table. This is my problem, can I used both SELECT and UPDATE statement at the same time in a single jsp file for example like this:
select * from test, test1;
update test
set total_shares=total_shares-Stotal;
where stock_code=Scode AND name_broker=Sbroker;
Can i have both of these statements in the same jsp file in oder to update the buy table?
Or can anyone suggest how can process that update?THANKS!
--------------------

Can i have both of these statements in the same jsp file in oder to update the buy table?Yes. But wouldn't it have been easier just to try it?

Can I use CSS, htmlTags and Alt tip for text with TLF?

Similar Messages

Maybe you are looking for