Can I use Deskjet k109a printer for photo printing?

Can I use Deskjet k109a printer for photo printing?

Hi,
Yes, your printer can print photos as mentioned in the following link:
   http://www8.hp.com/in/en/products/printers/product-detail.html?oid=3811379
Actually any printer can be used for photo printing, the results may not be the same.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Can I use other ink types for my printer?

    Hi! I'm currently using this HP Deskjet 2050 ALL-IN-ONE J510 Series. And suddenly, I ran out of ink. I have these inks here: 
    - 45 Black Noir-78 XL Tricolor- Ofiicejet 901 XL BlackAnd the rest is for HP Photosmart.My question is, can I use those 3 types of printer inks for my printer?And If ever that those ink are not available, what ink type should I use? 60? 70?Thanks you for the guys that will answer me here!

    Hi, No, depending on where you bought the printer, you can only use (also for XL cartridges): `. HP 61 Black & HP 61 Tri-color:  North America and Asia Pacific, (excluding India, China, Japan, and Indonesia)    HP 301 Black & HP 301 Tri-color: Western Europe       HP 122 Black & HP 122 Tri-color: Middle East, Africa, Latin America, Japan, and CIS    HP 802 Black & HP 802 Tri-Color: China, India, and Indonesia More info:     http://support.hp.com/au-en/product/HP-Deskjet-2050-All-in-One-Printer-series---J5/4027463/model/4027468/document/c01766411#N402 Regards.

  • Can I use my Time Capsule for wifi parental control?

    Can I use my Time Capsule for WiFi parental control.  The objective first is to use a time clock to control internet access (completely on or off).  Second objective is to use the Time Capsule which is also the WiFi router for more selective internet control?  Anyone out there have any tips on making this work?  We have Time Warner cable feeding the house internet, which is then corrected to the 2Tb Time Capsule which also provides our WiFi.  Any information including other alternatives would be most appreciated.  Surely we are not the only parents on the planet with this issue.  Thanks very much!

    how do I get the Mac addresses for each device (this won't be a problem, I demand the device, check it, and then return it).
    What wireless devices are we looking at here?
    Most devices have the AirPort ID or MAC Address or Hardware Address printed on the back or bottom of the device
    Otherwise, you can learn the correct number by process of elimination. Turn off all wireless devices except your Mac computer....if it is connecting using wireless.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon
    Look for Wireless Clients and click on the numerical IP address that is displayed
    Another box will open
    Look for the Hardware Address. It will be displayed as xx : xx : xx : xx :xx : xx
    Write that down and note that it is your Mac.
    Now, connect another wireless device and repeat the sequence.  Click on the "other" listing that you see to find out more info about that device.  Write down the ID or Address and note what device it is. Then power it off.
    Do the same for each wireless device that you want to have limited access.
    Post back when you have all the info.

  • What are the pros and cons of using people keywords, given that my catalogue is already uptodate with regular keywording of all subjects?  e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular

    What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects?  e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

    What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects?  e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

  • Can I use my WRT54GS as an internet & printer wireless router?

    ... or is the WRT54GS only for internet & I need to use a different product for wireless printing?
    Thank you for any help you can give,
    Michele

    Is your Printer is a Wireless Printer or its an Normal USP port Printer ?
    If your printer is an Normal USB Port printer then you need to buy a Print Server ( WPS54G or WPSM54G). So once you configure your Print server you will be able to Print from all your computers Wired / Wirelessly. 

  • Can you use color splash on a photo that was edited in black and white or do you have to mask the photo before editing it in black and white?

    can you use color splash on a photo that was edited in black and white or do you have to mask the photo before editing it in black and white?

    I think you are asking whether it makes an difference whether you create the mask before or after you edit the black & white version. The answer is that since the color version and the b&w version are on different layers (as seen here), it makes no difference when you edit the b&w version.
    Also consider another technique that separates the color element in the image. Here, the area surrounding the color image is a line interpretation of the scene, similar to a Tone Line Conversion, a technique that was created with film many years ago.  (I am so old,  I still remember how it was done.) This is how to get the result similar to the one shown above but with a line illustration created in Photoshop replacing the b&w layer version:
    1. Open an image. This technique is more successful if the image you select has many clearly defined edges.
    2. Make a duplicate layer. (Cmd+J). It becomes Layer 1
    3. With Layer 1 chosen, go to Filter>Blur>Smart Blur. Set the Quality to High and the Mode to Edge Only. The default settings are Radius 3.0, Threshold 25.0. To increase the amount of detail in the line conversion, raise the Radius setting. Use the white-on-black illustration within Smart Blur as a guide. Then click OK.
    4. The line illustration will appear as white lines in a black background. To change this to black-on-white, choose Image>Adjustments>Invert.
    5. Insert a new layer below Layer 1. It will serve as the background for the line illustration. To do this, hold down the Command key while clicking on the New Layer symbol at the bottom of the Layers panel. It is the second symbol from the right. It will become Layer 2.
    6. Fill this new layer with a light color. To do this, click on the Foreground Color symbol in the Tools section. It will open the Color Picker. Choose a light color and click OK.
    7. Choose Edit>Fill. Use: Foreground Color.  Mode: Normal. Opacity: 100% and click OK. Layer 2 will fill with the color. Although it will not appear in the image because Layer 1 is above it, a quick check of the Layers panel will confirm that the color you chose has filled Layer 2.
    8. Remove the white area from in Layer 1. Go to Layer 1. Choose the Magic Wand tool. Uncheck the Contiguous box in the Options Bar and click in a white area of the image. Next, click the Delete key.  Choose Select>Deselect to remove the marching ants. 
    9. (Optional)  You may now change the line illustration in Layer 1 from black to a dark color compatible with the color in Layer 2. To choose the color, click on the Foreground Color symbol in the Tools section. It will open the Color Picker. Choose a suitable dark color and click OK. While in Layer 1, click the first symbol next to the word  Lock:  in the Layers panel above Layer 1. This will prevent the dark color from appearing in the blank area of Layer 1. Choose Edit>Fill. Use: Foreground Color.  Mode: Normal. Opacity: 100% and click OK. The black lines will change to the dark color you chose.
    10. Combine Layers1 and 2: While in Layer 1, choose Layer>Merge Down. The layers are combined into a single layer called Layer 2.
    11.  Add a black mask to Layer 2 by clicking on the Mask symbol at the bottom of the Layers panel. It is the symbol to the right of the fx symbol. Where you would like full color objects to appear within the line rendition, paint in white on the black mask with a brush set to either soft-edge or hard-edge as the illustration and your taste dictate.  

  • HT204053 i RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    I RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • HT204053 Can I use one Apple ID for two Apple IPhones?

    Can I use one Apple ID for two Apple IPhones? I received an answer of yes.
    Now another question.  I have one ICloud Account, Two IPhones.  Can I use Find my IPhone via the one ICloud Account?  Can I see two IPhones on the map at the same time?  or do I need to view the second phone via some other method.
    Message was edited by: Hunter3D

    Yes.
    Cheers,
    GB

  • HT4436 My family has multiple iPhones.  Can we use one Apple ID for all of our phones?

    My family has multiple iPhones.  Can we use one Apple ID for all of our phones?

    If you use the same AppleID for iMessage and iCloud though, you will all be sharing the same message account and iCloud email account.  You can use a common AppleID for purchased content, but each create your own unique AppleID for iMessage and iCloud so you each have your own private accounts for those services.

  • How do we use if statement in labview?moreover can i use if statement inside for loop?

    how do we use if statement in labview?moreover can i use if statement inside for loop?

    The if statement in LabVIEW is the Case structure. You can find that on the Structures palette right next to the For Loop. If you're still on the same subject about terminating a for loop early, then what you do is enclose your functions inside the loop with a case statment and make one of the case's empty except for one or more constants that you might have to wire. Hopefully, the attached picture will explain what I mean. Also, as I mentioned in one of your other posts, I think this technique is not as good as using a while loop. The array in the attached example is the same size no matter what and you may have to handle stripping extra or invalid elements.
    Attachments:
    For_Loop_with_Case.jpg ‏21 KB

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • Can we use same program ID for more than one RFC scenarios

    Hi experts,
                I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
    data: iquote type standard table of ZIQMD initial size 0,
          IPRODUCT type standard table of ZPMS initial size 0,
          wa_quote type ZIQMD,
          wa_PRODUCT type ZPMS.
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
      TABLES
        I_QUOTE       = iquote          .
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
    'ID4'
      TABLES
        I_QUOTE       = iquote          .
      COMMIT WORK.
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
      TABLES
        IPRODUCT       = IPRODUCT          .
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
    'ID4'
      TABLES
        IPRODUCT       = IPRODUCT          .
        COMMIT WORK.
    when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER'  , but iam not getting data  for 'Z_CBT_RFC_PRODUCTMASTER'  interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
                  Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
    Thanks in advance.
    Thanks & Regards,
    Poorna.

    Just tried this and I can confirm that my earlier understanding was correct!
    One of my colleagues confused me out and the conclusion is,
    1. You need a separate TCP IP Connection for every interface with a Unique program ID.
    Regards
    Bhavesh

  • How can I use my itunes library for iphoto slideshow?

    how can I use my itunes library for iphoto slideshow?

    Here's a possible workaround:
    Create the slideshow in Iphoto and add a theme and music.
    Install Picasa  and it will include the slideshow on it's indexed list.
    Upload the slideshow to PicasaWebAlbums and send the link to anyone you wish.
    The music and theme is preserved.
    Caveat: My playback pictures appear darker than usual but that could be just lousy photography...:)
    Example:https://picasaweb.google.com/mb2180/Kona2011?authuser=0&authkey=Gv1sRgCPGWz_qPrM XKZA&feat=directlink

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • Can I use one gift card for two apple ID at the same time?

    Can I activate one gift card for two different apple ID and use amount from gift card like bank account?

    No, an iTunes gift card can only be redeemed onto one account, and it can be used to buy content for that account (you can't, for example, redeem it on an account and then use some of it for gifting content to another account).

Maybe you are looking for