Can I use differnet patterns for a "digital pattern match start trigger"

Hello,
Currently I would like use different patterns for a trigger the PCIe-6537 board to start capture data, for example, two patterns: 1101 and 1100 in digital IO lines line0:3, whenever one of this two pattern happens, start capture.
It seems like "digital pattern match" in DAQmx trigger can use one pattern only.
thanks!

Hi tt_ni,
Pattern I/O only allows the acquisition
based off of one pattern. This is a “limitation” of the hardware based on the
registers being set a certain way and monitoring a change from that. You could
add external circuitry to OR your patterns and based the pattern I/O off of the
output of that external circuitry. The other option is to look at an FPGA
option.
Mark E.
Precision DC Product Support Engineer
National Instruments
Digital Multimeters (DMMs) and LCR Meters
Programmable Power Supplies and Source Measure Units

Similar Messages

Can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?

can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?
thanks in advance.
<Email Edited by Host>

Yes you can. OS X version 10.6.6 and later can read/write exFAT. Windows XP SP3 and later can read/write exFAT. As posted by Radiation Mac, you can do it from Windows or from OS X.
However, I've noticed Windows to be somewhat picky about drives formatted on a Mac. So, if Windows can't read it, try formatting it on the Windows machine, and see how it works on the Mac.
Posting your email on a public forum isn't a very good idea. It will likely be harvested by spambots and used as the reply-to address for spam it sends out.
Also, most people are not going to send an email to you for similar reasons. Nobody knows who you are, so sending an email to you could be giving a spammer a valid email address.
The forum is set up to automatically notify you when there are responses to your questions. When you get one, you would log back into this forum and check to see what the answer was.

Can I use one account for both my labtop and my ho...

can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.

Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

Can I use touch ID for App Store without using a passcode?

It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??

From the article:
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting
and
You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
Regards,

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

Can I use same account for android and PC and how ...

Can I use same account for android tablet and PC and how do I link both?

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

Can I use a domain for one site and mobile me for a different site?

Can I use a domain for one site and mobile me for a different site?
I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?

Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
OT

Have iPad, iPod Touch and iPhone 4s. Can I use one charger for all

I have and iPad, iPhone 4S and iPod 4. Can I use one charger for all 3 and if so, which one. TZ all

You can use the iPad charger for all.

In Bte can i use same Product for 2 different process

in Bte can i use same Product for 2 different process

hi
as per i know yes but since there r two type of interface behaviour is defferent .
For
Publish & Subscribe interfaces
if any event occur in this type both the process can work simultaneously and they will not intervene each other
whereas in
Process interfaces
at an time any one process can be active.
Reward if usefull
Cheers
Snehi

Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

Yes. See:
How to use multiple iPods, iPads, or iPhones with one computer

How can I use jbo:InputSelect for a char type filed?

How can I use <jbo:InputSelect for a char type filed?
I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
There is a problem:
If I use (in the "DataEditComponent.jsp" file)
<jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

If I were in your shoes, here's how I would do it:
<%-- Assuming you have dsRoom and dsResponsibility --%>
<%-- Select is an HTML tag --%>
<select name="ROOM" size="1">
<% char roomID =""; // Init your character var
// Open a rowsetIterator to get the records and add them to the LOV
<jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
<% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
// add the value to the LOV
%>
<option value="<%=roomID%>"><%=roomID%></option>
</jbo:RowsetIterate>
</select>
If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
//Set the current record's char
char curRecord = (char)rowEdit.getAttribute("ROOM");
// inside the iterate:
if (curRecord == roomID) {
<option value="<%=roomID%>" selected><%=roomID%></option>
} else {
<option value="<%=roomID%>" ><%=roomID%></option>
Hope that helps!

Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

You can install it on 2 Apple computers

Can I use Time Capsule for Time Machine and a place to put my iPhoto Library

Can I use Time Capsule for Time Machine and a place to put my iPhoto Library?

Only if you partition the Time Capsure into two partitions, one for TM and one for the iPhoto LIbrary. But you won't be able to backup that library as it will be on the same drive as the TM backups.
It's not recommended. An alternative solution is to get another EHD, move the library to it and run it from there. Then TM can backup both your boot drive and the working EHD drive.
OT

Can I use differnet patterns for a "digital pattern match start trigger"

Similar Messages

Maybe you are looking for