Can i use dual channel

Hey i am using a K8T NEO MS-6702 v1.X and i was wondering if i can use DDR dual channel ram. anyone know ? plz leave msg here or preferably email me at [email protected] , Looking at buying this Kingston ValueRAM Dual Channel Kit 184 Pin 1G(512MBx2) DDR PC-3200 - Retail.

You can run Double-Sided memory on the K8T800, but not in Dual-Channel Mode. The mobo does not support it. Jocko may be able to tell you if the K8T800 PRO version supports that.

Similar Messages

Can i use 2 channel of USRP at the same time to receive a signal?

Hi everyone,
i want to do an implementation of time difference of arrival estimation between two receivers (antenna). I have an USRP kit, daughterboards and two antennas. There is only one source signal ( it is transmitted in anywhere it doesnt matter).
Can i use two channel of USRP at the same time to receive a signal ?
I need the original source signal and time-shifted version of this signal.
Many thanks for your help.
Sincerely yours,
Uysal.
Solved!
Go to Solution.

Hello,
I found this forum post which may be helpful to you. It looks like you can't receive from the two antennae in the way that you describe. I think this would require a two USRP setup.
Jon F.
Applications Engineer
National Instruments

Can I Use Dual Apple LED 24 Cinema Displays?

I have a macpro(2008) and want to use two Apple LED 24 Cinema Displays.
How can I connect my macpro and two cinema displays.
GT120has one miniport. It's it better to buy two GT120?
or Should I buy DVI to miniport converter?
Message was edited by: mosquito7979

Hi-
Can I Use Dual Apple LED 24 Cinema Displays?
Yes.
Either another graphics card or an Atlona box;
http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html
Either way will get your 24" LED displays connected.
If you use FCP, the box would be better......

My KingMax SuperRam can't run Dual Channel for K7N2-delta

My KingMax SuperRam can't run Dual Channel for K7N2-delta
why??

How many sticks do you have?
Please post complete systems specs in your signature.

How can i use dual 23" apple cinema hd display on a new mac mini

i have the old apple displays and really dont want to let go of them yet. Model # M8537ZM/A.
I currently have them both hooked up to my G5 powerPC, thru the DVI to ADC adapter. Model # M8661LL/B
Im tired of not being able to update my plug ins and some sites have become unable to even view without being up to date.
So im looking to buy a new Mac, but i will NOT spend another $2000+ for apple to call it outdated in a few years.
The Mac Mini looks to be a good buy only if i can it up to be on my DUAL 23" Apple Cinema Displays, Model # M8537ZM/A.
Please let me know what i would need to buy to make this all work, or if it not possable.
Thanks in advance.

Wow, I loved those monitors. Ten years ago. If they're still working for you, terrific; they are quite nice. Unfortunately, the ADC cable is going to make using them with modern Macs a bit of a Rube Goldberg experience.
The late-2012 Mini has a Thunderbolt port and an HDMI port. Both can be used to drive those displays.
Thunderbolt Port
1- Buy a Thunderbolt/Mini DisplayPort to DVI adapter.
http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter
2- Now buy a DVI to ADC adapter. Not cheap, and Apple doesn't carry them anymore, but they can be found.
http://www.amazon.com/Apple-DVI-to-ADC-Adapter/dp/B0000E2O14
HDMI Port
1- Buy an HDMI to DVI Adapter. One of these comes in the box with every Mini, so I won't link it.
2- Now buy a DVI to ADC adapter. Not cheap, and Apple doesn't carry them anymore, but they can be found.
http://www.amazon.com/Apple-DVI-to-ADC-Adapter/dp/B0000E2O14
Note that each DVI to ADC adapter will need access to AC power to provide power to each monitor. You already know this if you have these adapters.
Just something to think about: There are some people still running old Macs with ADC output who are desperate to find good-condition, larger-size ADC monitors. You might be able to sell yours on eBay or through some other means for more than enough to finance your purchase of new, higher-resolution HDMI or DVI monitors and avoid all the adapters and extra electrical taps.

How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
Philipp

Philipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application!

Can't use dual monitors

I have an HP ENVY Desktop - 700-515xt CTO. It has 1 DVI input, no VGA input. It has the Intel Integrated Graphic. I want to use 2 monitors (am using Windows 7). I tried using a DVI to VGA dual cable, but it says the 2nd monitor is not connected to the computer.
How can I use a 2nd monitor?
Thanks -
Greg
This question was solved.
View Solution.

Hello @gregw54,
I understand that you are looking to use two monitors on your desktop computer, and I would be happy to assist you in this matter!
To ensure that your display environment is configured correctly, I recommend following the steps in this document on Using Two or More Monitors with One Computer in Windows 7.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Can I use dual monitors in Premiere Elements 10?

I've been using Vegas Movie Studio until now. And I wonder if I even in Premiere Elements can use dual monitors. Not just to pull over the viewing part of a screen. But watch the movie in a small window on one screen with the timeline and still have the movie in full screen on the other. As this (in Vegas Movie Studio).

Yes, you can use dual monitors with but a few little tweaks, perhaps some tweaking of the OS (what OS are you using, BTW?) and then a tiny bit of work in PrE's Workspace.
In PrE, you will want to Undock Panel Headers, and this will allow you to drag almost all Panels, to suit your needs. Note: the Timeline's position is locked, but I think that is the only Panel, that behaves that way.
Now, you might need to set up your display in your OS's Control Panel>Display, but that should be easy, and has probably already been done, if you were successfully running Vegas in the dual-monitor environment.
I think that just Undocking Headers will get you where you want to go.
Good luck,
Hunt
PS - others might have a few more tips for you. While I run PrPro on my dual-monitor system, I only have PrE on my laptop, and PrE has a few differences, and limitation, than does PrPro. Trust what others, like John T, Steve and Neale tell you.

Can't get Dual Channel mode to work

Hello,
I have a pair of 512MB DDR400 ram sticks (listed in my sig).
The Memory Slots are arranged like this:
1 2 3
[cpu] | | |
I put each stick in slot 1 and 2 and no workie, still Single Channel Mode.
I put a stick in slot#2 and #3, no workie.
I put a stick in slot#1 and slot#3, no workie.
Is there something else that I'm missing or did I just buy the wrong memory for dual channel operation? It was not a matched set, but it is the same no-name brand of memory I bought from newegg.com. They both have the same 3225804T-5 marking on them...
They are supposed to be 2.5CS and that is what my bios is set to. I don't have any special settings in the bios that I know of..
Let me know if you have any ideas or if I need to post more information.
Thank You!

K7N2-V
Not sure about this but is that motherboard based on the Nvidia nForce2 400 chipset?
What does the manual specs say?
If it is then it doesnt have 2 memory controllers and can only do single channel.
Edit: http://www.pcper.com/specs.php?p=MB&id=38
That your mobo?

K8T Neo2-F MS-6702E Error using Dual Channel RAM slots

Hello
with RAM banks on slot 1 & 3 or 2&4 as recomanded, the PC doesn't start up
on the D-Bracket 3 red leds signs memory error!
The Ram is Kingston kit 2x512 KVR400x64C3AK2/1G
Someone can help me?

I thought you may be interested to know of my experience with memory on this motherboard. I had 2 x 256MB of Geil Value PC3200 DDR Ram on slots 1 and 3 for months and months with no problem at all - they were identical modules but NOT a matched pair - and ran in dual channel mode @ 2.5 3 3 6 and 400MHz according to CPU-Z ... absolutely no problems at all. These are double sided memory modules.
I wanted to upgrade and bought a matched pair of 2 x 512 Geil Value PC3200 DDR RAM intending to upgrade to 1.5GB ... I thought that I should put the two 512s in the green (DIMMS 1 and 2) and the two 256s in the purple (DIMMS 3 and 4) ... all I got was 3 beeps ...3 beeps, etc ...so I put the two 512s in DIMM 1 and 3 .... no problems!!!!! ... then I emailed MSI and got a reply ..... put the two 512s in slots 1 and 3 and the two 256s in slots 2 and 4 ... works fine!! ... now I have 1.5GB memory.
One other thing - the memory now (exactly as the manual says it would!!) runs at 333 on 2 3 3 5; this is 2 clock cycles for the CAS latency (???) ... instead of 2.5 .. so although the bus speed is slower, it takes fewer clock cycles for this to happen (whatever it actually does - something to do with the Column Address Strobe - how quickly/regularly the columns in memory are strobed. ...).
I don't pretend to be an expert but 2.5 clock cycles at 400MHz is equivalent to 2.5 nanoseconds per cycle which is 6.25 nanoseconds for 2.5 clock cycles .... 2 clock cycles at 333 MHz is 3 nanoseconds per clock cycle ( at first glance slower ... but) so 2 clock cycles take 6 nanoseconds ... so this has to mean that 2 3 3 5 at 333 MHz is faster than 2.5 3 3 6 at 400 MHz doesn't it?
JLP

[VIA Series] Can't get dual channel on P4 3.2 HT MSI PT880 Neo ?????

When I boot up it says 64 bit single channel, this is confirmed by CPU-Z.
I bought 2 PQI 3200 512 DAH Dual channel memory sticks (Identical) bought in a single package ($159.00) when I got this Mobo and machine , originally Fry's installed them in slot 1 and 2,javascript:void(0);
noidea
I've moved them to slot 2 and 3 which accordinhg to the hand book and what I've seen in forums should enable the dual channel mode. Still single channel. I've set the bios to force dual mode and still I'm in single mode. I don't know if this is related but anytime I've ever tried to use top perfromance or best performance settings in BIOs it won't reboot and I have to clear the CMOS so no overclocking for me...... I have the latest Bios version 2.0, just updated that from 1.90 todayand all the latest VIA drivers etc.
Name : Physical Memory
Memory Capacity : 512MB
Memory BankLabel : RAS 2 & 3
Memory DeviceLocator : DIMM2
Memory Type : 3DRAM
Name : Physical Memory
Memory Capacity : 512MB
Memory BankLabel : RAS 4 & 5
Memory DeviceLocator : DIMM3
Memory Type : 3DRAM
I wondered why Sandra said my memory was choking my processor. Its 800 FSB and HT is enabled. In addition, I have frequent BSOD issues, IRQ less or not equal, pagefile in non paged area, I just want to play some battlefield without getting kicked to desk top or boot.....
Other question, sitting here typing this and my CPU temp is 46 C.
Any help would be appreciated, I'm not sure what I've missed and I'm a noob at this stuff, would increasing the voltaqe help????

The online manual for the PT880 NEO-FSR says slots 1 and 3 are used for dual channel.
I don't know about the Via chipsets, but the Intel chipsets need the DDR voltage set to at least 2.65 for stable operation.

I can't use dual monitors since upgrading to Lion

I use my HD TV as a second monitor for streaming movies etc. Since upgrading to Lion, I can only use one monitor at a time. Is anyone else having this problem?
Thanks

Yes, the blanking of secondary monitors is an issue.
In fact, it is the reason why I went back to Snow Leopard on my 3-screen iMac
I encourage you to contact Apple with feedback
I have taken the following actions:-
Provided feedback to Apple viahttp://www.apple.com/feedback/aperture.html
Provided feedback to Apple viahttp://www.apple.com/feedback/macosx.html
Submitted a bug/enhancement request via my free Apple Developer account
Written to pretty much every mainstream Mac publication
Encouraged every poster, like yourself, to raise this with Apple in your own words
Next week, I will call Apple Support under the AppleCare agreement for my iMac
Please give them feedback, and we might get this silly design decision changed.

Can I use dual 24" displays as an extended desktop with my MacBook?

I have a 2.4 GHz MacBook I purchased this summer. I was considering using it for my desktop needs, but I need to have a two-monitor extended desktop. I don't particularly care for the thought of using the notebook's monitor in addition to the 24" display. I'd rather have dual 24" displays, but in talking with the "chat" line on the store website, they said this is impossible to have an extended desktop this way. I'm stubborn and can't help but think that is not impossible with the appropriate work-around.
Suggestions? Thoughts?
Thanks so much.

The only option for dual external displays on a Mac laptop is the Matrox DualHead2Go. But with a MacBook, you could only get a maximum of 1024x768 on the two montors, a completely waste of a 24" monitor IMO.

Can you use Dual Monitors on an HP Pavilion "All-In-One" Desktop?

Hello,
Just seeing the words "dual monitors" on the forum makes me realize I have several extra flatscreen monitors sitting around and I always loved them at work. I have an HP Pavilion All-In-One Desktop and is it possible to run dual monitors on an All-In-One desktop and what would I need in the way of accessories (cables, etc.) to be able to do that, if it's possible? Thanks in advance for any help!

Hi,
What is your AIO computer ? Many AIO computers do not have video out ports. You can use something like:
http://www.amazon.com/IOGEAR-External-Video-Interface-GUC2025H/dp/B004OA73PW
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I use WiFi channel 13 on a US MacBook?

Hi there. I own a MacBook 2.4Ghz, have been using it in the US for a while and everything worked just fine, WiFi included. Now that I find myself living in Europe for a couple of months, problems arise. The WiFi I'm supposed to use is on channel 13, and there's no way I can change it. I read that channels 12-13 are not allowed in the US, and that's probably why my MacBook doesn't detect it, whereas my European iPhone always does.
My question is: how can I "tell" my Mac to use this connection anyway? It's technically able to detect it. KisMac finds this connection showing its channel (13), so there must be some setting that prevents me to use it because it's illegal in the US.
Any help would be really appreciated

Those combinations work on my G4 iBook (which is even older than you Macbook) and they work with my Mac mini with the aluminum Apple keyboard (which is newer), so they should work for you.
When using a modifier key like fn, you have to hold the modifier key down, then press the second key. That is, the fn key must be down before the arrow key is pressed and it must stll be down when the arrow key is pressed.
I imagine you know that.
Do the arrow keys work normally, for example to move the cursor in text?
Does the fn key work for other things (fn - delete to delete forward, for example).
Have you looked for settings in Systems Preferences > Keyboard that might affect this (I don't really think that any should) or might you have any third party software that would affect keyboard input?

Can i use dual channel

Similar Messages

Maybe you are looking for