Can I use dual monitors in Premiere Elements 10?

I've been using Vegas Movie Studio until now. And I wonder if I even in Premiere Elements can use dual monitors. Not just to pull over the viewing part of a screen. But watch the movie in a small window on one screen with the timeline and still have the movie in full screen on the other. As this (in Vegas Movie Studio).

Yes, you can use dual monitors with but a few little tweaks, perhaps some tweaking of the OS (what OS are you using, BTW?) and then a tiny bit of work in PrE's Workspace.
In PrE, you will want to Undock Panel Headers, and this will allow you to drag almost all Panels, to suit your needs. Note: the Timeline's position is locked, but I think that is the only Panel, that behaves that way.
Now, you might need to set up your display in your OS's Control Panel>Display, but that should be easy, and has probably already been done, if you were successfully running Vegas in the dual-monitor environment.
I think that just Undocking Headers will get you where you want to go.
Good luck,
Hunt
PS - others might have a few more tips for you. While I run PrPro on my dual-monitor system, I only have PrE on my laptop, and PrE has a few differences, and limitation, than does PrPro. Trust what others, like John T, Steve and Neale tell you.

Similar Messages

I can't use dual monitors since upgrading to Lion

I use my HD TV as a second monitor for streaming movies etc. Since upgrading to Lion, I can only use one monitor at a time. Is anyone else having this problem?
Thanks

Yes, the blanking of secondary monitors is an issue.
In fact, it is the reason why I went back to Snow Leopard on my 3-screen iMac
I encourage you to contact Apple with feedback
I have taken the following actions:-
Provided feedback to Apple viahttp://www.apple.com/feedback/aperture.html
Provided feedback to Apple viahttp://www.apple.com/feedback/macosx.html
Submitted a bug/enhancement request via my free Apple Developer account
Written to pretty much every mainstream Mac publication
Encouraged every poster, like yourself, to raise this with Apple in your own words
Next week, I will call Apple Support under the AppleCare agreement for my iMac
Please give them feedback, and we might get this silly design decision changed.

Elements 12 - can it use dual monitors?

I've just purchased and installed Elements 12 on my new computer which runs Windows 8.1.
I would like to work on my digital scrapbooking page on one monitor and view the elements and papers from digital kits on the secondary monitor. Does anyone know if this is possible?
Thanks,
Barb

Working with dual monitors is possible :
http://www.elementsvillage.com/forums/showthread.php?t=79587&highlight=dual+monitors
I can't say much more, since I have only made a successful trial, but I don't have enough space on my desk to work with two monitors

Can you use Dual Monitors on an HP Pavilion "All-In-One" Desktop?

Hello,
Just seeing the words "dual monitors" on the forum makes me realize I have several extra flatscreen monitors sitting around and I always loved them at work. I have an HP Pavilion All-In-One Desktop and is it possible to run dual monitors on an All-In-One desktop and what would I need in the way of accessories (cables, etc.) to be able to do that, if it's possible? Thanks in advance for any help!

Hi,
What is your AIO computer ? Many AIO computers do not have video out ports. You can use something like:
http://www.amazon.com/IOGEAR-External-Video-Interface-GUC2025H/dp/B004OA73PW
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't use dual monitors

I have an HP ENVY Desktop - 700-515xt CTO. It has 1 DVI input, no VGA input. It has the Intel Integrated Graphic. I want to use 2 monitors (am using Windows 7). I tried using a DVI to VGA dual cable, but it says the 2nd monitor is not connected to the computer.
How can I use a 2nd monitor?
Thanks -
Greg
This question was solved.
View Solution.

Hello @gregw54,
I understand that you are looking to use two monitors on your desktop computer, and I would be happy to assist you in this matter!
To ensure that your display environment is configured correctly, I recommend following the steps in this document on Using Two or More Monitors with One Computer in Windows 7.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Can I use dual monitors on a HP 8425f

Is it possible to connect dual monitors to an HP 8425F ?
This question was solved.
View Solution.

Kaymac2, welcome to the forum.
You would have to add a discrete "PCI Express x16, video card" that has two connectors; DVI-D, DVI-I, HDMI, etc. The Integrated Video is not available when a video card is installed.
Adding a video card may require a power supply unit (PSU) upgrade, as well. Most mid-level video cards require a minimum of 400W to operate properly. The PSU in the computer is 350W.
Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Dual monitors in photoshop elements 11

how can i use dual monitors in photoshop elements 11 in photoshop elements 9 i can simply drag the open file over to the other monitor

Operating system? and how are you opening it? From a shortcut, from the welcome screen, from the organizer, from the program/application file itself?

Dual Layer Burning Premiere Elements 4.0

I know this is probably an easy one for anyone that has been using Premiere Elements for awhile. I just finished a 100 minute video and I want to burn it at as good of quality as possible on one DVD. So, I thought I would burn it using a dual layer DVD. I can't find a settting in Premiere Elements 4.0 that allows you to choose Dual Layer. Will it do this automatically or what do I have to do?

MirShaw wrote:
If you are trying to burn a dual layer, do you need to set an option to burn dual layer or will it just do it automatically? My burner will burn dual layer and I have dual layer disks but I'm not sure if I need to set an option. I don't see any option for dual layer in Share-Disk.
I believe that PRE identifies the type of disc you have and adjusts quality accordingly.
In my case though I never use PRE to burn to the disk directly but always first to the hard disk with 8.5GB settings. You select this in the Share> Burn To dialog. In the Burn To dialog there are the three options Disk ; Folder(4.7GB) and Folder(8.5GB).
The reason I do this is to force PRE to produce the best quality output it can (If I want it to shrink it to fit a 4.7GB I use external tools DVD Shrink or Nero Recode for example). I then end up with a final 'master' to burn with Nero or ImgBurn.
This also keeps the load off the machine as I close PRE after it creates the original 8.5GB file.
Cheers,
Neale
Insanity is hereditary, you get it from your children

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Remote Desktop windows 7 ultimate can't use two monitors

i have two computers in another office that remote into two other computers here at my site, all 4 computers run windows 7 ultimate, about a week to 10 days ago the two remote computers can still connect to the computers at my site but can only use one monitor
not dual monitors as before the 10 days or so. The use all displays box is checked in the remote desktop client, i have two sonicwall firewalls with a site to site vpn connection between the offices that they use to remote
can't get the dual monitors to work, any help would be appreciated

Hi,
Here is a good blog talking about using multiple monitors in Windows 7 ultimate and Windows Server 2008 R2, please take a look if there are any restrict policy settings regarding the monitor numbers like: "Limit maximum number of monitors per session"
Using Multiple Monitors in Remote Desktop Session
Best regards
Michael Shao
TechNet Community Support

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

Hi,
What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
Ushas Symon

It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
Good luck.

Can I import flash files into Premiere Elements 8

I want to use Google Motion charts in my video. Is this possible?

thanks for that info. I wil probably purchase it for myself -- but I wanted to test it first.
Date: Fri, 27 Aug 2010 10:41:01 -0600
From: [email protected]
To: [email protected]
Subject: Can I import flash files into Premiere Elements 8
One thing to point out, if you are doing this with the trial. While it is 100% (nothing crippled, or omitted), the trial WILL put a watermark on the finished Project. If you are doing this for work, be aware of that watermark. This http://forums.adobe.com/thread/433730?tstart=0 will give you some tips and background.
Good luck, and I do not want you to be surprised and mad, when you get that watermark.
Hunt
>

How to use dual monitor display in windows 7 using MSTSC command.......??????

how to use dual monitor display in windows 7 using MSTSC command ....?????

Hi Anurag,
The main issue is how to use the dual monitor in the Remote Desktop Session in Windows 7 ,right ?
please refer to the following links:
Using Multiple Monitors in Remote Desktop Session
http://blogs.msdn.com/b/rds/archive/2009/07/01/using-multiple-monitors-in-remote-desktop-session.aspx
Best regards

Can i use any monitor with my g5

I have an Apple G5 computer with a DVi-I output for a monitor> can I use any monitor and purchase an adapter to to fit the DVI output?

It depends on what the monitor actually supports, the size of the monitor, & the Graphic card capabilities.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected
Power Mac G5: Display Compatibility
http://support.apple.com/kb/HT2707?viewlocale=en_US
http://support.apple.com/kb/sp96

Can I use dual monitors in Premiere Elements 10?

Similar Messages

Maybe you are looking for