Can i use english interface but calling voice command in different language?
I try to use voice control in Chinese, but i am using english interface. I try several times but still fail. Any suggestion? Should i change it back to chinese interface?
looked in settings->general->International
there are settings for
language
voice control
Similar Messages
-
Can i use one interface to load data into 2 different tables
Hi Folks,
Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
Please give me advice
Thanks
Raj
Edited by: user11410176 on Oct 21, 2009 9:55 AMHi Lucky,
Thanks for your reply,
What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
can i load this source data into two staging tables by using single standard interface(some business logic is there)
If i can then give me some suggestion how to do that
Thanks in advance
Raj -
Can I use Mac Dictate to convert voice memos to text?
Can I use Mac Dictate to convert voice memos to text?
If by "Mac Dictate", you mean the built in speech-to-text feature, no, you can't use that to convert a voice memo, at least not easily. Speech-to-text is designed to work on live speech, not recordings. But, there's no harm in trying.
-
The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking. How do I make the voice stop and my IPAD work again.
If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither -
I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.
Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.
-
Is there a CUCM API which can be used to see what calls are in progress?
Hello All,
I am trying to build a basic monitoring application which will display a list of calls in progress along with endpoint information such as IP address etc
Is there a CUCM API which can be used to see what calls are in progress?
Thanks
MattMatt,
It looks like another person had a similar question before, see the following thread:
https://supportforums.cisco.com/discussion/9697836/can-use-axl-or-other-api-get-calls-progress
Also, according to the comments seen on that post, I was able to find the JTAPI developers guide, see more information below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/jtapidevguide/overview.html
If this still does not satisfy your question then, the best you can do is post this inquiry on the Cisco Developer Network on the following link:
https://developer.cisco.com/site/devnet/home/index.gsp
Hope this information helps,
Marco Rojas. -
have adobe id and a trail version of lightroom. my trail is finished. i can not use it anymore but i also can not download again lightroom via my creative cloud because i did already. so now i can not download and i can not use it
Try: Convert Creative Suite 6 applications to Creative Cloud membership
-
I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My phone is stuck between off and on. It has a white, slash circle going around and around. The button on top doesn't seem to do any good. The phone is only 31 days old. Please write back, I can't use it to even call in an emergency. Thank you
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
My husband got a new ipad and set up his own apple id without looking into the implications of that. Now I want to sync this ipad with our itunes so we can access it on here, but our itunes has a different apple id. Any way to do this?
You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.
-
Can I use iMessage for free with someone in a different country?
Can I use iMessage for free with someone in a different country?
Suzanne515 wrote:
dj,
That is good to know. Have you ever turned off wi-fi and used your cellular data instead? I'd like to know if your carrier charges you for the iMessage? I will be travelling with a +44 number on my sim card (Teletial based in the Channel Islands I believe) and some places like South Korea & Japan charge about $30USD/MB. ( or 19 GBP/MB). The devil is in the detail.
My carrier, 3, does not charge extra for cellular data. I pay £34 per month for a cellular plan with unlimited data. So, no, I do not get charged for sending iMessages whether I am on cellular data or wifi. If I were to try to send an iMessage to an international number that did not belong to an Apple device, it would send as SMS and I am sure that standard international rates would apply. Apple iMessage is a different protocol for users with an AppleID. There is no way for the carrier to distinguish it from any other data traffic. -
if a pdf file is written in indian language but prints off in a different language, what could be the issue?
Most likely the issue is non-standard fonts. Are all used fonts embedded in the document?
-
I can Ping FW inside interface but can not connect to remote resources
dear all
i configer my asa 5520 through ASDM to enable VPN Connection , i follow the cisco steps and it works fine and the anyconnect version 3.1 in Windows 8 - one day troubleshoot for this point only - can connect and have an IP address from the range , but i have something wrong in NAT may be because all guides talking about old ASDM ( NAT Exempt) but i am confeused to apply it on the new ASDM.
i can ping the inside interface from my labtop which using anyconnect , but i can not access anything else inside my network
Please anyone has a solution , please describe it using ASDM , thanks for help
This is my configuration
interface GigabitEthernet0/1
description
nameif SRV_ZONE
security-level 50
ip address 192.168.1.1 255.255.255.0
interface GigabitEthernet0/2
description
nameif TRUST_ZONE
security-level 100
ip address 172.17.200.1 255.255.255.0
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif MGMT
security-level 0
ip address 10.10.10.1 255.255.255.0
dns server-group DefaultDNS
domain-name xxx.xxx.xxx
object network obj-192.168.1.11
host 192.168.1.11
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service obj-tcp-source-eq-25
service tcp source eq smtp
object network obj-192.168.1.12
host 192.168.1.12
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object network obj-192.168.1.0
subnet 192.168.1.0 255.255.255.0
object service obj-tcp-eq-25
service tcp destination eq smtp
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network obj_any-01
subnet 0.0.0.0 0.0.0.0
object network obj-172.17.8.8
host 172.17.8.8
object network obj-172.17.0.0
subnet 172.17.0.0 255.255.0.0
object network obj_any-02
subnet 0.0.0.0 0.0.0.0
object network obj_any-03
subnet 0.0.0.0 0.0.0.0
object network obj_any-04
subnet 0.0.0.0 0.0.0.0
object network obj_any-05
subnet 0.0.0.0 0.0.0.0
object network obj_any-06
subnet 0.0.0.0 0.0.0.0
object network obj.172.17.8.115
host 172.17.8.115
object network obj.xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service http
service tcp source eq www destination eq www
object network obj.xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service https
service tcp source eq https destination eq https
object service newservice
service tcp source eq pop3 destination eq pop3
object network mail
host 172.17.8.8
description mail
object network 192.168.1.11
host 192.168.1.11
description smtp
object service smtpnew
service tcp source eq 587 destination eq 587
object network VPN_RANGE
description VPN ACCESS RANGE
object network VPN_PoOL
subnet 172.17.16.0 255.255.255.0
description vpn
object-group network DM_INLINE_NETWORK_1
network-object host 192.168.1.11
network-object host 192.168.1.12
object-group network Eighth_Floor
network-object 172.17.8.0 255.255.255.0
object-group service WEB_SERVICES
service-object tcp destination eq www
object-group network ENT_SERVERS
network-object host 192.168.1.11
network-object host 192.168.1.1
object-group network DM_INLINE_NETWORK_2
network-object 172.17.200.0 255.255.255.0
network-object 172.17.8.0 255.255.255.0
object-group service DM_INLINE_TCP_2 tcp
port-object eq www
port-object eq https
port-object eq smtp
object-group service web tcp
port-object eq www
port-object eq xxx
port-object eq ftp
port-object eq xxx
port-object eq xxx
object-group service xxx_Web_and_Email
service-object object http
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
object-group protocol DM_INLINE_PROTOCOL_3
protocol-object ip
access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 172.17.0.0 255.255.0.0
access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 any
access-list justice_splitTunnelAcl standard permit 10.100.100.0 255.255.255.0
access-list xxx-VPN_splitTunnelAcl remark vpn
access-list xxx-VPN_splitTunnelAcl standard permit 172.17.16.0 255.255.255.0
access-list xxx-VPN_splitTunnelAcl standard permit any
access-list cap extended permit tcp any host xxx.xxx.xxx.xxx eq smtp log
access-list cap1 extended permit tcp host 192.168.1.11 any eq smtp
access-list SRV_ZONE_nat_outbound extended permit tcp 192.168.1.0 255.255.255.0 any eq smtp
access-list SRV_ZONE_nat_outbound extended permit ip host 192.168.1.11 any
access-list TRUST_ZONE_access_in extended permit ip host 172.17.88.108 any
access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_2 10.10.3.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_3 10.10.50.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.8.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.200.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.0.0 255.255.0.0 host 192.168.1.12
access-list TRUST_ZONE_cryptomap extended permit ip xxx.xxx.xxx.xxx 255.255.255.248 any
access-list outside_access_in extended permit tcp any host 192.168.1.11 eq smtp
access-list outside_access_in extended permit tcp any host 172.17.8.8 eq www
access-list outside_access_in extended permit tcp any host 192.168.1.12 object-group web
access-list outside_access_in extended permit tcp any host 172.17.8.8 eq pop3
access-list outside_access_in extended permit ip 172.17.16.0 255.255.255.0 any inactive
access-list vpn remark vpn
access-list vpn standard permit 172.17.16.0 255.255.255.0
pager lines 24
logging enable
logging trap informational
logging asdm informational
logging host TRUST_ZONE 172.17.8.100
mtu INT_ZONE 1500
mtu SRV_ZONE 1500
mtu TRUST_ZONE 1500
mtu MGMT 1500
ip local pool VPN_POOL 172.17.16.100-172.17.16.254 mask 255.255.255.0
ip verify reverse-path interface INT_ZONE
ip verify reverse-path interface SRV_ZONE
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any SRV_ZONE
icmp permit any TRUST_ZONE
asdm image disk0:/asdm-635.bin
no asdm history enable
arp timeout 14400
nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.11 obj-xxx.xxx.xxx.xxx service any obj-tcp-source-eq-25
nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.12 obj-xxx.xxx.xxx.xxx
nat (SRV_ZONE,INT_ZONE) source dynamic obj-192.168.1.0 interface service obj-tcp-eq-25 obj-tcp-eq-25
nat (INT_ZONE,SRV_ZONE) source static any any destination static 192.168.1.11 obj-172.17.8.8 service obj-tcp-source-eq-25 obj-tcp-source-eq-25
nat (TRUST_ZONE,INT_ZONE) source static VPN_PoOL VPN_PoOL destination static VPN_PoOL VPN_PoOL
object network obj_any
nat (SRV_ZONE,INT_ZONE) dynamic obj-0.0.0.0
object network obj_any-01
nat (SRV_ZONE,MGMT) dynamic obj-0.0.0.0
object network obj-172.17.8.8
nat (TRUST_ZONE,INT_ZONE) static xxx.xxx.xxx.xxx service tcp www www
object network obj-172.17.0.0
nat (TRUST_ZONE,SRV_ZONE) static 172.17.0.0
object network obj_any-02
nat (TRUST_ZONE,INT_ZONE) dynamic interface
object network obj_any-03
nat (TRUST_ZONE,SRV_ZONE) dynamic interface
object network obj_any-04
nat (TRUST_ZONE,INT_ZONE) dynamic obj-0.0.0.0
object network obj_any-05
nat (TRUST_ZONE,SRV_ZONE) dynamic obj-0.0.0.0
object network obj_any-06
nat (TRUST_ZONE,MGMT) dynamic obj-0.0.0.0
object network obj.172.17.8.115
nat (TRUST_ZONE,INT_ZONE) static obj.xxx.xxx.xxx.xxx service tcp www www
object network mail
nat (TRUST_ZONE,INT_ZONE) static obj-xxx.xxx.xxx.xxx service tcp pop3 pop3
nat (TRUST_ZONE,INT_ZONE) after-auto source static obj-172.17.8.8 obj-xxx.xxx.xxx.xxx service https https
access-group outside_access_in in interface INT_ZONE
access-group DMZ_access_in in interface SRV_ZONE
access-group TRUST_ZONE_access_in in interface TRUST_ZONE
route INT_ZONE 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
route TRUST_ZONE 10.10.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.11.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.12.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.13.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 172.17.0.0 255.255.0.0 172.17.200.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa authentication serial console LOCAL
http server enable
http 172.17.8.0 255.255.255.0 TRUST_ZONE
http 172.17.8.155 255.255.255.255 TRUST_ZONE
http 172.17.8.45 255.255.255.255 TRUST_ZONE
http 10.10.10.2 255.255.255.255 MGMT
http 192.168.1.12 255.255.255.255 SRV_ZONE
http 0.0.0.0 0.0.0.0 INT_ZONE
http 172.17.200.0 255.255.255.0 TRUST_ZONE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map pol 1 match address TRUST_ZONE_cryptomap
crypto dynamic-map pol 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map INT_ZONE_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map TRUST_ZONE_map0 1 ipsec-isakmp dynamic pol
crypto map TRUST_ZONE_map0 interface TRUST_ZONE
crypto map INT_ZONE_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map INT_ZONE_map0 interface INT_ZONE
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
fqdn SEC-xxx-FW1
subject-name CN=SEC-xxx-FW1
no client-types
proxy-ldc-issuer
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment self
subject-name CN=SEC-xxx-FW1
keypair sslvpnkeypair
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 31
57f4e52e 6b851966 77515d62 c209a0df 1c32ce94 bb90cbce 497cfd04 6745ea85
efb75f85 2ae1ad35 344d94ab 915e01ab d3292626 ac697a52 b4ed6632 d3ed2332 ae
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate e6054352
c64f3661 30f14c3d 06b5f039 9f14560d 3b154fd1 42782268 7531689e 8e547d91
85e88415 e326f653 74733a6c a3f5c935 f7e83f56 f6
quit
crypto isakmp enable INT_ZONE
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 INT_ZONE
ssh 172.17.8.0 255.255.255.0 TRUST_ZONE
ssh 10.10.10.2 255.255.255.255 MGMT
ssh timeout 5
console timeout 0
management-access TRUST_ZONE
vpn load-balancing
interface lbpublic INT_ZONE
interface lbprivate INT_ZONE
priority-queue INT_ZONE
tx-ring-limit 256
threat-detection basic-threat
threat-detection scanning-threat
threat-detection statistics host number-of-rate 3
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint1 INT_ZONE
webvpn
enable INT_ZONE
svc image disk0:/anyconnect-win-2.1.0148-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy xxx-VPN internal
group-policy xxx-VPN attributes
dns-server value xx.xx.xx.xx xx.xx.xx.xx
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value xxx-VPN_splitTunnelAcl
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol webvpn
group-policy GPNEW internal
group-policy GPNEW attributes
dns-server value 172.17.8.41
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
default-domain value xxx.xxx.xxx
address-pools value VPN_POOL
username VPNAM password xxx encrypted
username VPNAM attributes
service-type remote-access
vpn-group-policy xxx-VPN
tunnel-group xxx-VPN type remote-access
tunnel-group xxx-VPN general-attributes
dhcp-server 172.17.8.41
tunnel-group xxx-VPN ipsec-attributes
pre-shared-key *****
tunnel-group pol type ipsec-l2l
tunnel-group pol ipsec-attributes
pre-shared-key *****
trust-point ASDM_TrustPoint0
tunnel-group SSLClientProfile type remote-access
tunnel-group SSLClientProfile general-attributes
address-pool VPN_POOL
default-group-policy GPNEW
tunnel-group SSLClientProfile webvpn-attributes
group-alias SSLVPNClient enable
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect ip-options
inspect pptp
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:78a941e3f509dec8f3570c60061eedaa
: endthanks god
i solve the problem
the problem is in NAT
i creat an object with the ip address host from VPN pool and name it vpn
then i do the nat from inside to that host as the following picture...
trust zone is the inside zone
vpn is the outside vpn host...
thanks and hope it helps anyone else... -
How can I use USB interface in Labview?
Hi.
Does labview allow to USB interface?
I have been seen allowing GPIB and RS232.
I'm beginer at Labview and wanna use USB interface for my target system and pc.
I wanna know how to labview interfaces from target system to pc.
And if Labview doesn't provide USB interface module, how can I use USB?
Is using a USB at Labview hard to beginer?
Plz, answer to my quetion.
sorry, my English is very poor.
thx for reading my article.You can access devices connected to the USB port, but not in the same way as you would a GPIB or RS232 device. There are no USB drivers like there is VISA for GPIB or serial. Rather devices that plug into the USB appear to the systen as some sort of standard resource like a printer, disk drive or IO board. LabVIEW then interacts with these devices as it would any other device of the same type.Look at it this way, if you have a USB daq device you will access it through MAX the same as if it were a plugin card. Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Maybe you are looking for
-
Error 70 - Código do status 225: Rejeição: Falha no Schema XML da Nfe.
Bom dia grupo! Nós estamos atualmente recebendo a seguinte mensagem de erro da SEFAZ relacionado aos batches que nós enviamos: Error status 70 "Error from the authorities" and Código do status (Status Code) 225: Rejeição: Falha no Schema XML da Nfe.
-
Hi all, Below query is not getting null values. Please help me to get the null values. SELECT T5.name, T4.VOD_NAME, count(T6.ATTRIB_03) FROM SIEBEL.S_VOD_VER T1 INNER JOIN VOD T2 ON T1.VOD_ID = T2.ROW_ID LEFT OUTER JOIN ISS_OBJ_DEF T3 ON T1.VOD_ID =
-
Crystal report related problem
Hello All, SELECT TOP (100) PERCENT T0.CardCode, T0.CardName, T0.Address, T3.Name, T0.DocDate, T0.DocNum, T0.VatSumFC, T0.U_Suffix, T2.Phone1, T2.Phone2, T2.Fax, T4.PymntGroup, T1.Dscription, T1.ItemCode, T1.Quantity, T1.OpenQty, T1.Price, T1.Currenc
-
WiFi PC connection: network configuration hangs
I have a new Z3C (UK) and I am trying to sync it with a Windows 7 x64 PC for WiFi access. The drivers are installed and "Xperia Z3 Compact" appears in "Computer". If I right-click and choose "Network Configuration" as per the instructions, a dialog a
-
I have gone through this with vb and now powershell. I am trying to do this without writing a bunch of granular vb code. I am trying to read a complex xmlFile (with a schema doc) into tables and then upload those tables into SQL. When importing to a