Can i use externel graphics card in my hp pavilion g6-2257sa laptop throw a hdml cable?

can i use externel graphics card in my hp pavilion g6-2257sa laptop throw a hdml cable?

What is it you are trying to do? They do make usb 2.0 to HDMI adapters which will give you an additional monitor through an HDMI port but the performance is only good enough for web surfing and spreadsheets and such. It is even a bit challenged for online video like youtube or netflix. If you wan to run demanding games through it, no.

Similar Messages

Can I use ATI graphics cards in SLI in MSI-7100?

My stupid-question-ometer is going off the scale, but I don't know the answer; can I use ATI graphics cards in SLI in my machine?
Also, whilst I'm at it, according to my knowledge, AMD are considered, in general, the lowest cost per unit power. Is it the same with ATI or nVidia - which generally offers best value?

And can you refine your other question, please. For one, ATI and AMD is one company now. Intel and AMD/ATI mostly have processors that in normal run are equal, but Intel has more refined top-end processors. In benchmarks Intel's normally score higher.

Can I use 2 graphic card for optimisation in adobe?

Hi, I am using Adobe CS6, Premiere pro, After effect, Photoshop, InDesign.
Current set up is Dell XPS 8700, GTX 650 Ti, 128gb Plex SSD, 2TB 72krpm HDD, 16DDR3 non-ECC ram.
I am looking to build a LGA 1366 dual xeon processor workstation.
Plextor M5 Pro as main hardisk for application cache
2x Intel Xeon X5570
16ddr3 10600Registered/ECC ram
SAS 10k rpm HDDs support 6gbps but I only using 3gbps controller (media drives)
Graphic cards:
1x Nvidia Geforce GTX 650 Ti
1x Nvidia Quadro FX 1800
Need advice on the possibility of using both graphic cards in my upcoming set up.
eg, ulitilising the Cudas on my GTX while still enabling the use of quadro fx 1800. (not sure if Quadro fx1800 can enhance the flow..)
If able, pls share some light on how to go about enabling both graphic to use in adobe
My work is mainly, photo and video editing.

Hi Stormancer,
You cannot use two different graphics cards in SLI which is the main benefit of having two cards.
As far as I am aware the FX1800 is optimised for CAD use when you state mainly editing photo and video so I can't see that card being particularly beneficial to you.
If you can afford it why not just buy a better spec single card either the Quadro or GTX?
I currently run a Windows 7 64-bit system with an i7 3700k, three SSD 6/Gbps, RAID 6/Gbps and 2300 Mhz memory with a recently upgraded GTX 680 and find it more than capable of both photo and HD video editing plus some After Effects work. I would class myself as a serious Hobbyist (with 30 years PC experience) and suspect that yes you need the latest kit if you are editing professionally because of the deadlines and high quality required but once you reach a certain level, the gains are very negligible.
While I was looking to upgrade my card, people on here suggested the Quadro K5000 mainly because I have a 10-bit NEC PA301W (25th anniversary present off hubbie) but this card was out of my budget so I settled on the GXT680 and find it more than capable for my needs. It is much faster than the old Radeon 5770 I had. However, while researching I came across this site which explains the way Mercury GPU is utilised, you may find it helpful:
http://blogs.adobe.com/genesisproject/2011/10/diving-into-nvidia-gpus-and-what-they-mean-f or-premiere-pro.html

Can I use two graphics card in Mac Pro

In order to use the CUDA advantage in Adobe Premiere Pro I bought an NVIDA Quadro FX4800. The original graphics processor in my Mac Pro (mid2010) is a ATI Radeon HD 5770. Can I use both cards? How do I ensure that Premiere is using the CUDA architecture if both cards are installed? Does a graphics card work if no monitor is attached to it?

Newer cards have minidisplay port and then use MDP to DVI (active dual link for higher resolution).
Yes you can have an ATI and Quadro or GTX.
Most people, based on cost/performance go with newest Nvidia instead.
You can run up against the limits of having two 6-pin aux power connections available.

Can I replace a Graphics card on a HP Pavilion DV6-2311ee ?

is it possiable to change the Graphics card of this model ?

Hi,
Basically you can, with a cost and I believe this cost may be more expensive than buying a new computer because you have to take into account:
New card price, and WHERE you can buy it because laptop cards are not the same as desktop cards. You can't buy from any normal shop,
Need new system board (may be),
Need new cooling system because generally speaking more powerfull card pumps out more heat (you want more powerfull card don't you?).
May need new PSU because your current PSU may not suitbale to the card. (I ordered a machine with Nvidia card and I needed to order a 90W charger at the same time, not the normal 65W charger. They simply rejected my order).
Labor cost.
Many, many packets of Asprin.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I use this graphic card with P35 V1.0

http://www.falconcomputers.co.uk/generic/website.asp?dept=63&page=productDetail&liwCode=100018024
It says PCI express 2 will it work with my P35 MS-7360 V1.0 ?
Thanks

Quote from: Henry on 17-December-09, 07:50:46
If you're referring to the one with 2 wires it is for connecting MB S/PDIF pinheader out to the VGA in S/PDIF for HDMI sound.
Yes thanks.

Use of graphics card with core install

Hi,
We have a sun sparc server that has the solaris core installation. We run our Jrun application server on this machine. We would like to use a mapping software called Mapxtreme that needs a graphics card on the server. Can I use a graphics card without upgrading the core Solaris OS installation.
Thanks,
Sreeni

Well first the limit for the device is 1GB SD Card.
You can store music, videos, pictures, documents (word files, books and pdf files to name a few) and programs.
Message Edited by IrreducibleM31 on 03-13-2009 08:19 PM

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

How to make MacBook Pro use intel Graphic card only?

When unpluged, my 15' pro always use AMD praphic makes my battery only work for 2-3 hours. Is there a way to stop computer using AMD graphic card when i'm not playing game???

Try using this software (It is 3rd party but it is safe) called gfxCardStatus. It just places itself on the top bar or side bar (not the dock) it will probably be a d in italics (this is italics for those who don't know) or an i. Just click on it and click on the Integrated Only option in the bar which will switch the card to the original integrated graphics card. Also, check for dependencies bellow the "Dynamic Switching" option (if there isn't just skip this) dependencies can cause changes to your graphics card usage and may be the problem; for me it was but who knows it might be some internal error. If you don't trust me I totally understand just putting it up there for those who want it. You can follow the above option by "ds store" which might also work.
Link: http://codykrieger.com/gfxCardStatus

How can I measure the Graphics Card usage? I.e. percent load

Hello,
How can I measure the Graphics Card usage, like with the processor in Task Manager, but instead giving a percentage usage for the graphics card instead? Is there an easy way to do this, or would it require a lot of code? Is it even possible?

Ah, so It's unlikely that Java3D will include anything for reading this data then? I was really aiming at measuring the GPU usage under this API which although i have limited knowledge using, I do at least have some knowledge - I wouldn't have a clue how to access any other API's!
I'm using an NVidia TNT2 card at the moment, which is quite old.

Can you upgrade the Graphics Card in this Machine?

I Just ordered the HP Pavilion Model Number is m7-1015dx i really really look forward to getting this laptop it has really really good specifications for the price. The only thing that has been bugging me really bad is that "Can you upgrade the Graphics Card in this machine?" Since i am using the for Hardcore Gaming and School.
- Thanks in advance.
This question was solved.
View Solution.

BrennonTB wrote:
I Just ordered the HP Pavilion Model Number is m7-1015dx i really really look forward to getting this laptop it has really really good specifications for the price. The only thing that has been bugging me really bad is that "Can you upgrade the Graphics Card in this machine?" Since i am using the for Hardcore Gaming and School.
- Thanks in advance.
Hi,
Upgrading graphics chips on laptops is very difficult and mostly impossible because the chips are soldered to the motherboard. You can upgrade the graphics chip by replacing the motherboard with a compatible one which has a more powerful graphics chip. In your case it is a mobo with an Nvidia GF GT650M with 2GB of DDR5 RAM. However, the motherboard costs approx $600. The part number you need is: 682040-001.
It looks like M7series laptops are compatible with Dv7-6000 series laptops. See a service manual:
http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

FC Studio 2 definitely uses the graphic card to render...why ?

Hi,
FC Studio 2 doesn't work like earlier versions at all for rendering.
It now uses the graphic card exactly like Motion, so my displays are lagging when i use other apps while FC Studio is rendering.
Is it possible to make FC Studio rendering only by CPU like earlier versions ?
thanks

The FXplug type of effect uses the graphics card, and the others don't... (FX Script effects- the "older ones"... You can see which is which in the effects tab of the Browser. There's a column there that denotes the type. You can even choose which effects will be available in FCP 6 manually... look at the effects tab in list view to see which is which. Staying away from the FX Plug category of effect keep your GPU from being used.
In the bottom of the Effects menu is where you select to choose what's available, and to choose "My Preferred Effects", click on that column next to the ones you want to show up... (Preferred column in the list view of the Effects tab.)
The FX Plug category of effect will render faster, using your GPU to do so.
Jerry

Can one upgrade the graphic card for Imac (intel based)?

can one upgrade the graphic card in an Imac (intel based)?

While anything is theoretically possible, you would need to find another GPU that is compatible with your specific model iMac, and you would need to modify OS X to use a driver appropriate for whatever you propose to install. Future OS X updates would break it in short order. Not only that, you'd void whatever warranty that remains. It's not worth it.

Can i upgrade my graphics card in my HP envy 17-j102tx?what can i upgrade in this laptop?

HEllo sir,i bought this laptop for gaming purpose,but the graphics card ie nvidia 750M is too weak for gaming.so can i upgrade its graphics card?if no,is there any other option?can i exchange my laptop for a new laptop?because im totally unsatisfied with this laptop.and what can i upgrade in this laptop except ram.please help

HP actually loaned me a very similar laptop last year...an Envy 17-j029nr that had the 750M graphics and while the video was way above average, it was not a true gaming laptop. HP is not going to accept it back in trade after you have used it but it can be sold still for a decent sum and you can use the proceeds to buy a gaiming laptop. You might consider the HP Omen. It has nVidia 860 graphics with up to 4 gigs of DDR5 I believe for maybe $2200 all in. Right now I have the lower model Omen on loan from HP but mine is the version with the DDR3 video memory. It is much stronger than the 750M video in my old loaner. Oh, and there is no way to upgrade what you have. The 750M was the best video offered in that model line. It is soldered to the motherboard so there is no "card" to remove and replace. if this is "the Answer" please click "Accept as Solution" to help others find it.

Can I Change My Graphics Card?

Hello, I've dealt with my laptop with low graphics card settings for a while, but games are updating and I have limited options now. Is there any way I can purchase a new graphics card and install it? Or even upgrade the current one I have?
Any information would be helpful, I have listed my specs below (I just Saved All Information from dxdiag, sorry if there's extra info):
SYSTEM INFORMATION:
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130828-1532)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: 1066AWU
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (4 CPUs), ~2.5GHz
Memory: 6144MB RAM
Available OS Memory: 6058MB RAM
Page File: 3884MB used, 8230MB available
Windows Dir: C:\windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
DISPLAY DEVICES:
Card name: Intel(R) HD Graphics 3000
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Thank you!

hi Gabedean,
Welcome to Lenovo Community Forums!
You can check this similar thread about your inquiry.
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Possibility-of-manually-installing-graphics...
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can i use externel graphics card in my hp pavilion g6-2257sa laptop throw a hdml cable?

Similar Messages

Maybe you are looking for