Can I use FCPx while Compressor is rendering?

I am in the middle of a long render using Compressor 4.0.4... but would ideally like to get on with editing our next program. 
Should I be able to continue working with FCPx while rendering?
thanks,
Geoff

Yes. You can go ahead and work. responsiveness  may or may not be quite as snappy as you're used to, but it should be fine.
Good luck.
Russ

Similar Messages

  • Using FCPx and Compressor dvd stutters

    Using FCPx and Compressor I have put a 2 minute film on a dvd but when I play the dvd it stutters irregularly. I have tried lots of different settings and need HD quality. Can anyone help please? Thanks Helen

    Are you putting a ProRes file on a standard DVD? You can't play it back. The DVD disc his nowhere near the through put needed to support high data rate media. The DVD format is very heavily compressed to allow proper play back, which that can be managed off the disc.

  • How can I use zoom while recording on my iPhone 4S?

    How can I use zoom while recording on my iPhone 4S?

    Christina_319 wrote:
    How can I use zoom while recording on my iPhone 4S?
    You can't change the zoom while recording.

  • Can i use fcpx on os 10.8.5

    due to other apps i have on my mbp, i'm not quite ready to update to mavericks.  can i use fcpx on os 10.8.5?

    No. The only app available from the App Store in 10,1, which requires 10.9.
    Consider creating a 10.9 volume on another drive and boot form that. Download to the 10.9 volume.
    Russ

  • TS2734 I left my iPod at a friends house. She doesnt have internet. So its not connencted to the internet. And i had never charged it so its been dead for about a week. Can I use iCloud while its turned off and not connected? Please help me!! I need to fi

    I left my ipod touch at a friends house. She doesnt have internet. So it's not connected to the internet. And I had never charged it so it's been dead for about a week now. Can I use iCloud while it's turned off and not connected? Like, will it show a message and ring if it's not connected to the internet and turned on? Please help me ): I really need to find it!!!

    " Can I use iCloud while it's turned off and not connected? "
    No.
    "Like, will it show a message and ring if it's not connected to the internet and turned on?"
    No.
    There is nothing you can do other than look for it,

  • I can't use safari while talking on viber, it's just disconnects my call or put viber on hold if I use safari while talking on viber.

    I can't use safari while talking on viber it just disconnects the call or puts viber on hold it never happend till I update ios7

    If you have Verizon or Sprint, that is how those networks operate.

  • Can I use FCPX for Sony HDR-XR520?

    Can I use FCPX for Sony HDR-XR520?

    You probably can but the best way to be sure is to download the free 30 day trial of FCP X and see how it goes.
    http://www.apple.com/finalcutpro/trial/

  • Can i use impdo while dump file was creeated using exp

    hi,
       I am using oracle 10g database I want to use impdp but my dump file was created using exp utility so can I use impdp now?
    regards

    Hi,
    >>kindly tell me how can I replace existing user from new dump user using imp utility
    You mean the user which used to take the Exp/import right?
    if yes, You do not need to drop/replace this, you just need to add/grant read,write privilege on directory. you can check this:http://www.oracle-base.com/articles/10g/oracle-data-pump-10g.php
    HTH

  • SPEL: Can I use java expressions for complex rendering?

    Hi
    I would like to avoid complexity in extending controllers and VO's in iProcurement by adding some rendering control to my page attributes such that the value of "rendered" is a more complex SPEL function.
    E.g.:
    normally I could use:
    rendered="${oa.VO.isFieldRendered}"
    where the above attribute exists in the VO.
    However, I would like not to have to create a new Attribute, but use the following:
    rendered="${oa.VO.Field.equals("Y")}"
    Does anyone know if this kind of thing is possible?
    Cheers
    Chris

    Hey Jon! Will e-mail ya later!!
    Tapash: Am trying to use an existing VO field to determine the rendering of a page item. The current field has a Y/N value, not boolean which the render SPEL generally uses.
    The only way I know how to do this is to extend the VO and add a new calculated boolean field. I can do this, but was hoping that SPEL might provide an alternative..
    Thanks
    Chris

  • Can i use wifi while my iphone 4 is activating for 7 million hours????

    cause it is taking forever.

    You can use the phone on wifi. I waited a while for mine to activate on Wednesday and I turned it off and back on and a flood of texts appeared. They might have a flood of activations but if not active soon call your provider and let them no of the issue they might be able to push it through the system.

  • Can I use GPS while the data and cellular networks are turned off?

    Here's the deal: I am traveling on the Alaska Highway from Alaska, through Canada, to the lower 48 states. AT&T has advised me that while I am in Canada I will be charged 79 cents a minute for airtime and 2 cents per kilobyte for data. Ouch. Given this, I intend to turn my iPhone on "airplane mode" while in Canada, so I don't accidently fetch mail, or do some other thing which would load data at the cost of 2 cents per KB.
    BUT! I would like to be able to take pictures with my iPhone 3G and have them tagged with location by the GPS. Everything I have read indicates that GPS is turned off when the phone is in Airplane Mode.
    So, my question is: can I still retain access to GPS for my photos while turning off all other radios in my phone? With the new Places feature in iPhoto, I'd really hate to have 2,000 miles worth of photos and no location data to go with them, ya know?

    Tamara, thank you. Of course I already did that, and no, they are not geotagged. Which is why I specifically phrased my question, "can I still retain access to GPS for my photos while turning off all other radios in my phone?"
    In other words, is there SOME WAY--ANY WAY--to turn GPS back on, like you can with Wi-Fi? Or maybe there is some way, any way, to turn off all the cellular functions only, while leaving the GPS receiver on?
    I am aware of the "Data Roaming" setting in the Network settings. I have always had that turned off, but I cannot experiment with that setting, as I am not in an area where roaming would occur.
    I'm just hoping to avoid a surprise huge bill due to GPS grabbing some data or relying somehow on the cellular network, and am hoping to know if anyone has any experience with these issues. At 2 cents per KB, an average email would cost $1 to download. I have no idea what kind of data flies back and forth when GPS is used, or if the ONLY data received by GPS is from the navsat system. I seem to recall that iPhone GPS also relied somewhat on cellular data, though for photo geotagging it probably shouldn't have to.
    I apologize if I was not clear in my questions.
    Thanks so much for your help!
    Message was edited by: Ronald S

  • Can i use wifi while my iphone 4 is activating???

    please help????

    from your other post it seems you are already having activating issues, so if it was me. i wouldnt even touch it until its down.

  • Can i use my iphone while its charging for the first time

    i just got the iphone 6. when i turned it on for the first time it had like half battery, i let it fully die and now im charging it for the first time. can i use it while its charging? every phone ive ever had had such a crappy battery life. i wanna finally have a good battery! lol

    Anson Luk wrote:
    Hi. Sure, you can use your iPhone when charging (but not always) . Just release your battery under 10% and recharge to 100% once a month, it can be helpful for battery life.
    That is actually not considered best practice. Lithium ion batteries should be kept topped up when possible. That was previously recommended to calibrate the battery sensor. It never had any effect on the overall life of the battery.

  • Is there a way to tell which apps are using data while on WIFI?

    Hello,
    I have just purchased an iPad Air 2.  I use my phone as a mobile WIFI hot spot to connect to the internet when I do not have a regular WIFI connection available.  151 MBs of data were consumed over an hour and a half or so.  I played about an hour of Hearthstone, but I know from tethering my phone to my laptop that it usually doesn't use anywhere near that amount of data.
    I would like to track down which applications might be using the data so that I can avoid using them while connected to my phone.  Is there any way to do this?

    Thanks for the quick response.  That's a little disappointing though.  Is there an app on the store?

  • Can I use Final Cut During Compressor Export?

    Hi,
    This is my first time using compressor and I'v read that you can use Final Cut while Compressor exports. When I start to export from Compressor, I get a message on Final Cut that says Frame X (what ever frame the export is on) and I can't use Final Cut when Compressor is exporting. I have rendered everything in Final Cut's timeline. Can I use Final Cut while compressor exports?
    Thanks,
    Zevie

    Zevie,
    You would not lose any quality. You will speed things up considerably.
    To set up compressor to use all your free cpu, you need to enable sharing with qmaster. On your system preferences, there should be a qmaster item.
    There are lots of posts about how to set it up. Do a search on it. I think even apple has instructions on how to do it. You can read the compressor manual as well.
    It is called distributed processing, and you will want to set up a quick cluster.
    Here is an article about it. The only thing that I know is different is on Snow Leopard, you may have to select "Managed" in the services box for compressor. This will allow you to select the number of instances.
    http://www.devia.be/news/article/setting-up-a-virtual-cluster-to-speed-up-compre ssor/
    Good luck
    Ken

Maybe you are looking for