Can I use Firewire 400 to iPod cable connection with my Touch?

Anyone know if it will work. I don't have USB 2.0 on my Dual 1GHz Tower. It works on the old click wheel style, same connection docking. Ideas?

You can add a PCI USB 2.0 card and it should work. Sonnet makes one that works pretty well:
http://www.sonnettech.com/product/allegro_usb2.html
though I've not had an iPod touch to try when we've had these cards installed.

Similar Messages

  • Can I use my Philips SJM3140 iPod Docking Cradle with my iPhone?

    Can I use my Philips SJM3140 iPod Docking Cradle with my iPhone 4s?

    Pete, I'm grateful to have your comments... ! If you're like me, you may have the impression that the quality of technical support -- and documentation -- for third party hardware and software has declined dramatically over the past 10 - 15 years...
    So my concern was that somehow different signal assignments / or current would be applied to the 30 pins (between the two devices), and that might result in frying my new iPhone 4s.
    It would, nevertheless, be dandy to have the ability to 1.) charge the iPhone; 2.) transfer files over USB (from a third device); 3.) output stereo audio from the iPhone 4s via the (included) stereo RCA plugs to various devices; and, possibly, 4.) output video, via the Philips's S-Video port, to another device or monitor.
    Your comments are helpful. And perhaps I can trust that the pin assignments are the same for the iPhone 4s and the iPod (for example, the 4th Generation iPod with color display).

  • Can I share my iMac's internet connection with my Touch?

    I have a DSL modem and do not have a wifi network setup. Using Lion, can I still share my iMac's internet connection with my Touch?
    If so can you give me step by steps? Will this be something that I can turn off and on without interfering with my regular ethernet internet connection?
    Thanks. Asking this for a friend who is scared that she will somehow mess up her existing internet connection if she tries to set this up. She
    called AppleCare to get them to walk her through this and they denied any knowledge of the ability to do this. Huh?

    OK. Remember this is just a form of texting, so it's not easy to discern whether a question is explicit or rhetorical. Sometimes you have to give the reader a clue.

  • Has anyone use FireWire 400-800 cable to hook up their "old" FW400 devices?

    Hello all.
    Just wanna find out if anyone has started to use a FireWire 400 to 800 cable to hook up their existing FW400 external devices (like hard drives, etc) to the new Mac mini
    Appreciate any feedback, performance. Thanks and cheers

    Remember that the external iSight is a discontinued product and apple no longer support it. So they probably only gave the FW bus enough juice to power portable hardrives. Most other FW devices have their own power anyway.
    I have seen this behaviour before with FW video capture devices. The manufacturers did not supply a psu with the device but there was a powersocket on the device should your mac not comfortably power the device you were expected to get a PSU or use a powered FW hub.

  • Using firewire 400 with 800?

    I'm currently using firewire 400 to connect to a hub with 3 ext hard drives. I've ordered a 17 inch MacBook Pro but is there any way to connect a firewire 800 to these disks? Is there a hub that supports both or are they so different that they don't link in any way?

    I read on this forum somewhere that if you connect a FW800 device to the FW800 port on the MBP, and a FW400 device to the FW400 port, the FW800 performance will downgrade to FW400 because they share the same bus or something... that kind of contradicts what you are saying Michael, are you sure you can run FW800 and FW400 at the same time without degrading the FW800 to FW400? (it makes sense that you should!!! i was quite surprised when I read it!!).

  • Can I use firewire to transfer everything from my Macbook Pro (Intel Core 2 Duo 2.25 GHz) to the new iMac (2.5GHz Quad-Core Intel Core i5)?

    I have a MacBook Pro to use at work. It has everything (all genuine softwares, server connection etc). The company is using a contract IT company so connecting to the server and setting email is real issue with me as this IT people can't configure Mac. Last time it took them 1 week to set up everything for me ( me one the phone with them as they aren't coming to our office - they only use QuickViewer to get access to my laptop).
    Now the company is buying me an iMac so that I can use the laptop at home. Can I use firewire to transfer everything to the new iMac so that I don't waste my time installing softwares & calling this IT people to set up my email and connection to the server again? If it works do I have to enter serial numbers in again for all the softwares or I have to buy new softwares (I know with Adobe CS - I can only install in one computer)?
    Thanks in advance.

    If you want to use the adobe suite on the imac you will have to deactivate it on the MBP or it will show up as being used. That is if you can only install it on one computer. Some licenses you can install it on 2 computers but it has to say that on the cd key tag.
    Sorry to hear about your bad experience with the contractors. It is not that hard to get stuff like that up and running on the mac.

  • Can I use the optical digital audio cable to connect INSTEAD of the hdmi?  My tv only has 2 hdmi ports, and they're both taken

    Can I use the optical digital audio cable to connect INSTEAD of the hdmi?  My tv only has 2 hdmi ports, and they're both taken

    I'm afraid that's very misleading and inaccurate.
    Firstly an adapter won't work, it would need to be a converter and then if it's a compliant converter it won't let you watch HDCP protected content such as that from netflix or from the iTunes Store.
    Secondly, whilst I'm not going to debate whether component or HDMI is better, component is certainly not better if it's been converted from an HDMI signal. You can't make anything better by simply converting it to another type of signal.

  • Firewire 400 to 800 cable not working

    Hi
    I have just bought a third party Firewire 400 to 800 cable to connect from my Lacie drive's 800 port to the 400 port on my iBook. When I do this, the drive does not mount at all.
    Does anyone know why?
    best
    Aldo

    iBook forum this is not. Mac Pros are towers like G5 only Intel.
    I would avoid LaCie, but that is me. Also, is the drive bus powered? not good. Have a good power supply?
    What did you do last?
    Have you run Disk Warrior?
    Take the cable back and pick up new FireWire 400 case.
    http://www.macsales.com/firewire/
    they have cables also.

  • Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?

    Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?  I think I can, but I'm too chicken to try. Thank you ahead of time,
    Mark

    Thanks for the quick reply.

  • Ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    To get iTunes to see your iPod try:
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing it in recovery DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Sometimes this program will get th iPod in recovery mode:
    RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage

  • HT1689 can i use whatsapp in my ipod touch 4??

    can i use whatsapp on my ipod touch 4 without jailbreaking...

    Welcome to the Apple Support Communities
    WhatsApp is only supported on an iPhone

  • Can i use siri in my iPod Touch 4g if the iOS 6 update is released

    if the iOS 6 update is available can i use siri on my iPod Touch 4g
    help so i will not buy the new iPod touch

    that was sad

  • I have a Sony AC-U50AD charger can I use it on my ipod touch and ipad mini - there is a switch for "ipod"

    I have a Sony AC-U50AD charger can I use it on my ipod touch and ipad mini - there is a switch for "ipod" - I've had the adapter for several years and I think it's ok for my ipod touch but since it pre-dates both of these products I want to try and make sure it's ok to use with them before I do use it. Thanks.

    If iTunes does not see your iPod then your only hope is a data recovery company. Not cheap.
    However, you may be able to get some photos by:
    Photos
    - If they are in an iPod backup then restore another iPOd, iPhone or iPad from that backup. See the restore topic of:
    iOS: How to back up
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer
    - If they are in the iTunes backup then get them from the backup by:
    Recover iPhone, iPad or iPod photos from backups with Picturescue
    How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html
    iPod recovery software to restore lost music files      

  • I can not get my Ipod to connect with my computer using a usb cord

    I can not get my Ipod to connect with my computer using my usb cord ?

    Hi starhalcomb,
    I'm sorry to hear you are having issues with your iPod touch. I also apologize, I'm a bit unclear on your exact configuration. If you are having issues with your iPod touch not being recognized in iTunes when you connect via USB, you may find the information and troubleshooting steps outlined in one of the following articles helpful:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • Can you use hdmi to rgb composite cable with Mac mini

    I am thinkining of getting a mac mini .vI have a older jvc 2004 wit rgb composite conection .Can you use hdmi to rgb composite cable with Mac mini or do yo have to use a hdmi to composite converter to hook up to the tv wit Mac mini

    12. Can I output via Mini DisplayPort to an RCA or S-Video connection?
    No. The Mini DIsplayPort connector allows output to Mini DisplayPort, DisplayPort, VGA, DVI, and HDMI connections when using the proper cables and adapters. However, output to RCA, Component, or S-Video connections is not supported.
    - The current Mini as one HDMI out. The Min somes with a HDMI to DVI adopter. Howver, the HDMI output only outputs digital signal and thus yo will need a converter to convert that digital signal to analogue composite
    - The Min also comes with a Thunderbolt port which accepts the min display connector. However. based on 12 above it does not seem to support composite. The 12 is from
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)

Maybe you are looking for

  • PO Attachments using Carry Out Sourcing not transferred to Backend

    Hi SDN Team, I have an issue with PO Attachments using Carry Out Sourcing. The version I am using is SRM 5.0 which is connected to SAP ECC 6.0. The necessary configurations for attachments are made in ECC. When I create a SC through the normal proced

  • Role VN

    Dear Sir, While iam making PO role VN does not exist warning mssg is appearing. i checked the partner function and also vendor master. both places VN are there can anyone tell me why this warning mssgs SK

  • Safari, iPhoto & iCal not finding Mail

    For some strange reason Safari cannot "see" Mail to "send a link" or "contents" of a web page. I get a message saying that I meed to install Mail first. In iPhoto the button to "email" a picture is generic (grey oblong and not iconic) and now only as

  • Possible bug in replace array.

    Should we expect this type of result in "Array"? My guess it should be the inverted version of "Array 2". I've corrected it by placing shift register on the tunnels. Please remove the post sorry.

  • Subcontracting third party vendor

    Hi all, A Purchase order is done for a subcontractor, but the materials are not issued from our plant instead it directly goes to the subcontrator from some thid party vendor. How is the process handled in sap. Please explain the flow until the invoi