Can i use Fireworks created Nav Bar in iWeb?

I am new to iweb and want to have a specific layout for my website. I don't want any of the templates, so I used fireworks to create a Navigation bar with buttons that have prelinked to the "standard" html, i.e. home.html, photos.html.
can i use this with iweb? how? if not, and i just use each button indvidually, can i create a text description of the button (so webcrawlers can see my navigation bar)?
thanks for any help i can get.

Two pages for you to preview for your answer:
Web Gallery:
http://www.apple.com/dotmac/webgallery.html
AND
iPhoto .Mac Web Gallery:
http://www.apple.com/ilife/iphoto/#webgallery
As I perused the two sites quickly, I didn't see their connection, but you may see something different!
Paula

Similar Messages

Can i use Fireworks created Navigation Bar in iWeb?

I am new to iweb and want to have a specific layout for my website. I don't want any of the templates, so I used fireworks to create a Navigation bar with buttons that have prelinked to the "standard" html, i.e. home.html, photos.html.
can i use this with iweb? how? if not, and i just use each button indvidually, can i create a text description of the button (so webcrawlers can see my navigation bar)?
thanks for any help i can get.

Two pages for you to preview for your answer:
Web Gallery:
http://www.apple.com/dotmac/webgallery.html
AND
iPhoto .Mac Web Gallery:
http://www.apple.com/ilife/iphoto/#webgallery
As I perused the two sites quickly, I didn't see their connection, but you may see something different!
Paula

What Function Module can be used to create vendor master data in SAP R/3?

Hello -
I've been trying to find a standard SAP delivered BAPI that can be used to create vendor master records in ECC 6.0. Up to this point I have not been able to do so. With SAP MDM solutions and SRM solutions it seems logical that SAP would deliver a standard BAPI that can be used to create vendor master records in the ERP/R3 environment (similar to the BAPI_MATERIAL_SAVEREPLICA for creating material master data records).
I have been able to find BAPI_VENDOR_CREATE but this only calls the online transaction and does not offer much additional functionality beyond what transaction code XK02 already offers.
The next best alternative appears to be IDOC_INPUT_CREDITOR but our preference would be to not use IDOCs for the project we are working on.
Can anyone offer any insight or personal experience on how vendor master records have been successfully interfaced with SAP R/3? Did you have to use IDOCs or create a custom RFC call? Thanks for the help!
Rich Wortmann
<< Personal information removed >>
Edited by: Rob Burbank on May 14, 2009 10:43 AM

Quite a gap in the BAPI arsenal. I think the options are IDoc, which you don't want, good old program RFBIKR00 (requires flat file for input, can be used via LSMW) or DIY (very complex).
Thomas

What is maximum number of tables that can be used to create HTMLDB app?

What is the maximum number of tables that can be used to create an HTMLDB app? There seems to be a 10-table limit?
Thanks.
Dianna Gibbs

I have over 200 photos in my book and it was accepted. There is a limit on each widget though. The interactive widget seems to have a limit of around 30 or 40.

What tool can i use to create an animation for iPad

What tool can i use to create an animation the will run in I.E., Firefox and iPad. I want to have a series of large buttons that i can scroll using arrows on the left and right side of the large buttons, with each button being a hot spot. I can't use Flash because it is not supported on the iPad.
Thanks,
Steve

I've been playing with both Edge and Hype, and I found that stuff I create in Hype actually works in IE 8, but stuff I create in Edge does not. I'm not sure what the difference is, other than perhaps Hype automatically writes some legacy scripts so that things will work in IE. Hype's not perfect, but it's doing the job for what I needed it to do, where Edge was no help at all (working in IE I mean).
I think Edge is a much better tool - more robust, greater feature set, but Hype seems a bit more forgiving and seems to play nicer with crappy browsers like IE.

I can't use Fireworks cs3 under Vista

why i can't use fireworks Cs3 under Vista?and the same
problem on illustrator CS3.sorry for my poor English.

ibjork wrote:
> why i can't use fireworks Cs3 under Vista?and the same
problem on illustrator CS3.sorry for my poor English.
I can use both with no problems at all and all CS3
applications do
support VIsta. You will have to be much more specific about
what
problems you are having, error messages, etc.
StÃ©phane Bergeron
reach:connect:communicate
www.webfocusdesign.com
blog:tutorials:articles:gallery
www.pixelyzed.com

What can I use to create a photo banner/collage that is free formed. I'll need background colors and ability to place 5 or more pics in a horizontal row? Does adobe have a product i can use to create this?

what can I use to create a photo banner/collage that is free formed. I'll need background colors and ability to place 5 or more pics in a horizontal row? Does adobe have a product i can use to create this? I'm not looking for templates when creating.
thanks
tracy

You can select 5 (or more images) and place them by dragging in Adobe InDesign. After creating document go to File > Place, navigate to images and select them. In InDesign start dragging and press right arrow key couple of times then release mouse button. You can export file as PDF, JPG, PNG image from File > Export.

If std iview can b used for creating qualified record

Hi all
standard iView can b used for creating qualified record ? if possible and how it is? please let me know ASAP
Regards
Sunil

Hi Sunil,
Yes it is possible to create qualified record using Standard MDM iViews.
Please follow the steps mentioned below:
1. Create the Item Details iView with Create and Edit option enabled and select the Qualified table fields along with the other fields.
2. Go to the option Relationship and Qualified Display fields. You will find the entry of the Qualified field that you have selected earlier.
3. Edit the entry and select the Qualifiers that you want to appear in the output. Also select the Non-Qualifier as well.
4. Save the iView and preview it.
Note: To create an entry in the Qualified table first create the main table record and click on save. Then click on Edit to make an entry in the Qualified tables.
Regards,
Jitesh Talreja

Creating nav bars using layers

I am trying to create a nav bar on the left hand side of a web page.
I have created it how GoLive CS2 seems to suggest, so each option that will appear in the nav bar has been created as a seperate layer. I have positioned these correctly, then added actions to each of these so things will happen when the user mouse clicks on an option.
It has 5 main links in at the top level and each of these have sub-sections. At the moment when the user clicks one of these options the sub sections appear beneath it and the other options that were previously in the way slide down to allow these sub-sections to appear.
The issue is when these sub-sections need to open out into sub-sub-sections. I have succesfully worked out how to get these to ShowHide on a mouse click but I cannot, for the life of me, work out how to make the options below it to then slide further down to accomodate the appearance of these sub-sub-sections, despite managing to make it happen for the sub-sections.
Perhaps because they have already slid down already and now cannot do it again? Surely not?!
Anyways, I hope that is all clear. If no-one replies I shall assume not and try a a re-post.
I would be grateful of some help.
Thanks!
Simon

ok, I have put the nav bar up at this address http://www.simonpeel.co.uk/leftnav/leftnav.html
Obviously, 'View Source' to see the code.
To re-create another problem I would like a solution to, do this:
Click 'Come & See' and then click 'Sunday'. Then click 'Welcome' and then re-click 'Come & See' and you will see it does not revert back to the original state but keeps the spaces where the sub-sub-sections are. I may be able to work this problem out myself but I lost patience and thought if someone was going to look at it anyway, you could save me some hassle!
Many thanks in anticipation,
Simon
p.s. feel free to take a look at my site by deleting
/leftnav/leftnav.html! I'm quite proud of it, although there are some dead links lurking around.

Slicing an image to be used as a nav bar for html email

The html email that I've created renders as designed in most email clients. It doesn't in Outlook 2007. It was suggested that I slice an image for the nav bar so it displays horizontally as designed instead of vertically.
It's been a long time since I used slicing images in Photoshop. It doesn't appear that Image Ready is there anymore. I use Photoshop CS3. Is there a straightforward document that could walk me through the steps to accomplish this? Using the Photoshop "help" confuses the heck out of me and when I asked this question in the Photoshop forum, many looked at it but I've had no responses. Or could it be done in Dreamweaver somehow?
The web version of the html email is: http://www.theshimogaproject.com/email/riverrun-guests-email.html

You can't use DW to slice an image. Do you have Fireworks? It's really easy to do it in Fireworks, that's what I would use. If you need to use PhotoShop, a quick Google search, "slicing images in photoshop," return plenty of tutorials that you can choose from.

Master Sheets - Created Nav Bar is Behind Assets (back layer?)

Is there a way to get assets created in the Master Sheet to be the top layer?
Creating a web page with the horizontal nav bar across the top.
I used the template and built off of that. When I finished with the nav bar in the Master Sheet, I started to add content to my normal sheets. The nav bar, and the drop down navigation I created are behind any assets added to the slides.
I included a mock up of another nav bar I created. The "Home" text asset added to Sheet 1 is covering my nav bar I created in the Master Sheet. The nav bar is in the activated state for the "Home" button. I am using a layer stack and mouse events to create the drop down and button select effect.

Hello,
I've spoken with the development team and they've explained this here:
A master sheet can be used as a front master and a back master. It is even possible to have a back and front master. You can select the masters in the properties of the sheet - by default only a back master is used.
Thanks again for your question!
Sarah
Sarah
Forum Moderator

Newbie - Help with Fireworks CS5 nav bar

I am new to Fireworks. I am using Fireworks CS5. I need help with creating navigation bars and menu. Any tutorial or tips is greatly appreciated.
Thank you.

You'll find a tutorial named "Create a basic navigation bar" in the Fireworks help files.

What easy to use (MS or third party) tool can I use to create and host a webservice API on a SQL server database

I'm looking for a (MS or third party) tool with which I can create, publish and host webservice API's on a custom SQL database. For example a API which presents all customers, or validates a user login.
I prefer a tool that can be used without .NET programming skills, just using database scripts and queries.
Could somebody suggest a tool for this?
Many thank,
Slowytech

Use Visual Studio (Microsoft Visual Studio Express 2013 for Web ) and the WebAPI framework. You can easily create REST endpoints for your data. You can even
use ODATA to enable RESTful queries over your data.
See
http://www.asp.net/web-api/overview/odata-support-in-aspnet-web-api
David
David http://blogs.msdn.com/b/dbrowne/

How do I 'disasscociate' an e-mail address from an existing Apple ID so that that e-mail can be used to create a new separate Apple ID

My wife and I currently share an Apple ID (it's a long story). The Apple ID we use is actually mine and uses my e-mail address as the ID itself. I have been trying to create a new Apple ID for my wife but everytime I get an error message that states: 'that e-mail is already associated with another Apple ID.' What exactly do I have to do to remove her e-mail from being associated with my Apple ID so that I can create a new Apple ID for her?

Surfstud31 wrote:
My wife and I currently share an Apple ID (it's a long story). The Apple ID we use is actually mine and uses my e-mail address as the ID itself. I have been trying to create a new Apple ID for my wife but everytime I get an error message that states: 'that e-mail is already associated with another Apple ID.' What exactly do I have to do to remove her e-mail from being associated with my Apple ID so that I can create a new Apple ID for her?
Make sure her email address is not set as an alternate for your AppleID.
Then again, you don't know if it is associated with your AppleID.
Also, any chance she created an AppleID at one time and simply never used it/forgot about it?
Go here -> https://appleid.apple.com/ and select Forgot your password?
and enter her email address that shows it is in use.

What rule can be used to create a namesapce

Hi all:
I want to create a namespace in IR for ECC, but don't know what value should and could be used for the namespace. is there any rule for the naming of a namespace?
Thank you very much!

Hi,
You can follow some standards as said
For Namespace it is as below
http://<short Scenario Detail> : <Company Name> . com
an example would be
http://SalesOrderCancel:abc.com
for some specific cases where your description is same and you want to be specific about the direction too you can specify like
http://SalesOrderCancel:sap_to_bi:abc.com
Thanks!

Can i use Fireworks created Nav Bar in iWeb?

Similar Messages

Maybe you are looking for