Can I use firmware from third party on my WRT54G v5 router

Hi,
I can see any third party firmware on web for WRT54G routers. Can I used them on WTR54 v5 router, will it work fine? HAve anyone tried....

there's no guarantee that the third party firmware is effective... somehow, they're good too... but the thing is you will not be qualified for linksys support if ever you will upload a third party firmware on your router. make sure that the third party firmware is capable of fixing your problem if you think that the solution for your problem is only that third party firmware then go ahead.

Similar Messages

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • Can i use 'iGetter' (a third party download accelerator) to download Mac OS X v10.7.4 update?

    can i use 'iGetter' (a third party download accelerator) to download Mac OS X v10.7.4 update? im running 10.7.2

    Third party download manangers usually end up causing problems when downloading apps from the App Store.
    Try installing the OS X Lion Update 10.7.4 (Client Combo)
    That will update your Mac to v10.7.4 but be aware that file size is 1.4 GB.
    Bear in mind, if at some point you need to reformat or repair the startup disk or reinstall the Mac OSX, you would need to use Lion Recovery which requires broadband access to the Internet via Wi-Fi or an Ethernet connection

  • Can we install Applications from third party websi...

    hello everyone
    recently bought my new asha 501 phone
    but i have a doubt 
    cant we install apps from third party websites like MOBILE9.COM, ZEDGE ETC
    ????? IF YES THEN HOW???
    and what JAVA VERSION IS THIS 
    J2ME???
    aksytechie wrote:
    goto settings > about product
    PLS HELP ME 
    Moderator's note: We amended the title of this post as we moved it to the appropriate board.

    Hi,
    Welcome to the forum!
    We cannot guarantee its compatibility when downloading from a third party website. Though we recommend all Nokia users to download any applications, games, or even themes through the Nokia Store. In the Nokia Store, you will be able to see all compatible applications, games and themes for your device. Just make sure you have an active and stable internet connection on your phone, you are currently signed into your Nokia account, find the application that you would like to download and then download it from there. 

  • Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

    Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
    can any one help me bcoz i have to publish without air runtime.......

    Hi,
    This option is available when your publish target is set to AIR 3.6.
    You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
    Thanks!
    Mohan

  • Help me!    How to use it as a web service from third party application?

    After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
    TKS！

    Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
    :D
    John

  • Sender RFC from Third Party System

    I have a vendor who is actually communicating through RFC from third party Application to SAP R/3. Now we are trying have XI in between. Where as with minimal impact on both sides.
    Solution.
    1. Have the RFC made as ZRFC in XI. Let the vendor call the RFC in XI ABAP and internally make an RFC call through XI Interface to R/3 as Sync Interface. Because we need to report the information back to the system where the request initiated.
    2. Have RFC INI file copied as SAP Suggests under one of the folders. Develop the regular RFC to RFC Interface via XI.
    Is there any other alternatives other than the above mentioned solutions? Or out of those 2, which one will provide the best performance
    Appreciate any feedback. Please advice

    That's exactly what we are trying to achieve here. By Eliminating direct connection R/3, we are placing XI in between. But with the budget/timeline constraints from the Partner side, we are trying to have minimal change on the partner side. They might not change something to web service etc...
    Here is the text about INI file
    You can configure the non-SAP RFC client to connect to the sender communication channel in the following ways:
    ■       By defining the parameters PROGID, gateway-host, and gateway-service within the saprfc.ini-file using RFC-SDK.
    ■       By using appropriate parameters in the function RfcOpenEx.
    If you use the saprfc.ini-file, the respective RFC destination has to be of type R.
    All the parameter values used within the saprfc.ini-file or with the function RfcOpenEx should match the entries maintained within the corresponding sender communication channel.
    Example for the saprfc.ini-file is as follows:
    DEST=RFCCLIENTEXT
    TYPE=R
    PROGID=P106646.HKExternalClient
    GWHOST=pwdf2153
    GWSERV=sapgw40
    Please check the following link, for the same  text on RFC Sender
    [Help.SAP|http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm]
    Using the same Sender RFC for non-SAP System, please share any ideas

  • Firmware and third party updates

    Hi Everyone,
    Currently I am running ARD version 3 on tiger server and I have Tiger and Leopard OS X running on my client machines (G5, Intel Mac).
    I was wondering if there is a way to send Apple firmware and third party application updates to all of my Mac clients using ARD.
    I have used "softwareupdate -i -a" and this command seems to be only working with Apple software but nothing else.
    1. Is there a command that I can send (using ARD) to update firmware on all my Mac clients?
    2. Is there a command to update third party software such as Adobe, Roxio etc?

    1. No
    2. Only by repackaging the updates into an Apple standard package installer and pushing them out via ARD. I suggest you use LanREV's InstallEase (Free) to package up the updated files on your master build system and deploy those packages.

  • Accessing BW Query from Third Party System

    Hi,
    We have a requirement by which user can do the following through the third party system.
    1. User will enter the Parameters in the third party system.
    2. User will then call the BW Query with the above parameters from the third party system.
    3. BW query should get execute based on the parameters (variables) and output to be displayed.
    3. After displaying the output, the same should get passed into the db tables or the flat file to the third party system.
    Ideal steps will be :
    1. Enter the parameters in the third party system
    2. Calling the query from third party system with the
    parameters
    3. Executing the BW query
    4  Displaying the output and
    5. Sending the output back to the third party system
    Kindly advise how can we handle this scenario.
    Regards
    Ramesh Ganji

    hi,
    you can use third party etl tools. I used XtractIS for microsoft analysis services.
    http://www.theobald-software.com/cms/en/xtract-is/xtract-is-plugnplay-mit-sap-und-den-ssis.html

  • Problems after unlocking from third party? iPhone 6

    iPhone 6 locked to softbank japan.
    what will be the problems i will face after permanent unlocking from third party?

    No carriers in Japan offer unlocking.
    Only the carrier a phone is locked to can unlock it.
    Allowing a third-party to access your phone in any way will mean it's hacked to unlock it, which voids your warranty and support from Apple, including these forums. A third-party cannot permanently unlock the phone.
    You'd be much better off selling the phone to someone who will use it with Softbank and buying an unlocked phone from Apple, if available.
    ~Lyssa

  • APPLE LOOPS AS BASE FOR SONG - CAN I USE IT? - 3RD PARTY?

    I have used an iLife Loop as the basis for the pre chorus and chorus of a song I have created. The rest is mine and I have written lyrics for the whole.
    It seems to me that a third party wrote the jingle and could have a claim on this. Is this correct?
    If so then how would I find out who that is and gain permission and or assign part of the copyright to them should income come from the song?
    The Logic Pro and MainStage software license agreements state:
    "Title and intellectual property rights in and to any content displayed by or accessed through the Apple Software to the respective content owner.
    Such content may be protected by copyright or other intellectual property laws and treaties, and may be subject to terms of use of the third party providing such content.
    Whilst the use of the Loop from Apple's point of view seems to be OK this clause, prior to that muddies the waters. Anybody have any insight on this please?
    Thanks
    Nic

    The instructions depend on which Windows backup product you use. Apple doesn't make one.
    (98279)

  • 6008 USB digitizer continuous data stream to be used by a third party software

    Hi all,
    I am trying to achieve a seemingly straight forward task and could do with some expert advice. I have a USB 6008 digitizer which is reading three channels of analogue data. I need to continuously stream data which can be accessed by a third party software for other things (signal processing, visualisation etc). I am proposing to record 10sec length of data and save it in a file in a designated location and repeat this and carry on as long as the programme is running. This will have generated a number of files each with fixed length of data which can be sequentially accessed by the third party program.I will then need to make this VI a standalone application which can be run a LabVIEW less machine.
    The other method, may perhaps be, to use toggle between two data files- write in one file-save it, write in the second file and access the first file and overwrite the first file while access the second file.
    Could anyone please help me with some ideas, expecially with the writing in files modules?

    The first approach is rather straightforward. Create the filenames programmatically, typically by adding 1 to a number at the end of the previous filename.  The string and path manipulation functions can easily do this. This would produce a series of files named filename, filename1, filename2, filename3, filename4, ...
    The alternating file approach is also feasible.  The key there is coordination between the two programs so that they are not both competing for the same file.  You need to have a plan for what to do with the data if the alternate file has not been released by the other program when LV needs to write to it.
    Lynn

  • DMS document migration from Third Party DMS server(Omnidocs)

    HI guys,
    I would like to migrate document from Third party DMS server to  sap DMS server.
    What is the apporach.
    1. The thir party dms server is protected with login name and password.
    How i can extract data from the software.
    Please spread your thoughts on this.
    what is the function module to  download the contents of the server. by passing the url.
    with regards
    Giri

    use ALE scenario to send the documents

  • Incoming invoice from third party system

    Hi All,
    Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
    Thanks in advance for response.

    Why not starting with docu?
    The general process  is explained well in help.sap.com
    As a service, put this into your Google: vendor invoice edi site:help.sap.com

  • I bought a macbook air and iMac from third party with preinstalled ilife and iworks

    I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs.  I have no CD's or license for those products?
    thanks

    No, you will not be able to do that.

Maybe you are looking for

  • ALV Output to Excel file

    Hi All, I am downloading the ALV output to Excel file.I am making use of  LIST--->EXPORT--->SPREADSHEET option. My list is having Header, Footer, sub totals and totals.When i transfer the list i am facing following problems 1.Even i am getting the em

  • Asset under construction

    Hi Guru,            I want to know about how the internal order is the linked to asset under construction?

  • Variable myConnection might not have been initialized

    I'm getting a strange exception I don't understand. Can anyone help me out? "variable myConnection might not have been initialized"           DataSource dataSource;           Connection myConnection;           ResultSet rs;           Statement pStmt;

  • Business Content Installation with Remote Activation

    Hi    During Business Content Installation, BI system attempts to do Remote Activation in the Source System   But in my case, it's searching for the datasources in the ERP source system instead of the CRM system   How do I get the Business Content to

  • Technology used in iStore Application

    We wanted to know the technology used in building iStore pages in 11.5.10 and R12 ? From our analysis, it doesn't looks like OAF or ADF. It has lots of JSPs. Is there any Oracle proprietary technology or framework used for building this application ?