Can I use flash drive in Windows that install on Oracle VM Server

Dear everyone,
I install Windows server 2003 on Oracle VM Server x86. I can use .iso file by copy iso file to /OVS/iso_pools and add resource. But I want to use flash drive on Windows server 2003 that installed on Oracle VM. I don't know how to do or it can do. I want to plug flash drive in Oracle VM Server and can use it on Windows server 2003
Thank you so much for advance
Fujimaru

It looks like you will not be able to use it without continually stopping and starting the guest and editing the vm.cfg file to add the physical device once it is mounted on the DOm0

Similar Messages

  • How can i use Flash Drive in V880 with Solaris 8

    i want mount pen drive(flash drive) in my V880 server where i install Solaris 8. so what is the procedure?
    thanks

    Two bugs, one affecting Apple's Mac platform and another attacking Microsoft's Windows, exploit certain Flash player vulnerabilities to install malware onto users' systems, reports ArsTechnica. While users of other operating systems like Linux have yet to report attacks, Adobe's advisory notes the exploit affects all platforms.
    Designated as CVE-2013-0634, the first vulnerability targets the Safari and Firefox Web browsers running on OS X, and is also being used as a trojan to deploy Microsoft Word documents containing malware. For Mac users, the flaw affects Adobe Flash Player version 11.5.502.146 or earlier.
    On March 1 Apple again blocked Flash Player for Lion and Mountain Lion:
    http://support.apple.com/kb/HT5660
    The Adobe Flash patch can be found on Adobe’s website, and users can visit this page to check if their software is the most curent version.
    You should uninstall any previous version first, and repair permissions after installing the new version.
    If you still get a ‘plug-ins blocked’ message:
    http://support.apple.com/kb/HT5271
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.  The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • Can I use flash drives to transfer data from one MBP to another at a differ

    I've looked and cannot find any info on the use of flash drives. Can I use a flash drive to transfer data from one MBP to another one at a different location? (ie; school Apple and home MBP) Grade tests and papers at home, enter data into home computer, then put it on flash drive and carry flash drive to school, transferring data to school desk top? Are certain flash drives preferrable over others, name brands, size, etc?

    Yep, you sure can. Just about any drive will work as mentioned above. But I'm partial to SanDisk and PNY. I've used both and they work great! Currently I carry both a 2GB SanDisk Micro Cruzer and a retractable 2GB SanDisk Cruzer, both really nice. Replaced my oldie but goodie 256MB PNY drive that I've been using since they first came out.

  • Can't use flash drive with new iMac

    We are new Mac users.  My husband downloaded a zip file of aviation charts.  He needs to transfer the zip file to a flash drive and then to a portable device so that he can use the charts when he flies.  We plugged in a flash drive, but it doesn't show up on the desktop or anywhere else.  We have looked everywhere on the system.  What are we doing wrong?  Thanks for your help!

    Make sure you have prefs set to show external storage devices on the Desktop and in the Sidebar. To set that, go to Finder's Preferences (Preferences in the Finder menu).
    On the General tab in Finder Preferences, checkmark the item "External disks" near the top.
    On the Sidebar tab in Finder Preferences, checkmark the item "External disks" under Devices.
    You may also need to format the drive before you can use it. You can use Disk Utility to do that (Applications folder > Utilities > Disk Utility).

  • Can I use Flash Player on windows 8.1 when using the desk top version of esplorer?

    I canot run flash player whn I use my desk top version of windows explorer.  Can I ae it work?

    By "Cannot run" what do you mean?
    Videos don't play?
    The Adobe test page doesn't recognize the Plugin?

  • How can I use Super Drive with windows 8?

    Will someone please point me to the location where I can download the drivers to use the Apple Super Drive on my Windows Machine running 8.1?

    Try https://www.youtube.com/watch?v=CM-nkbCup3A
    tt2

  • Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.  Where can I download the cs6 for mac? And can I use the same serial no that  I received for windows.

    Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. 
    Where can I download the cs6 for mac? And can I use the same serial no that  I received for windows.

    You need to run a platform swap:
    Order product | Platform, language swap
    Until it's through, you can use the trial version.
    Download CS6 products
    Mylenium

  • I plugged my flash drive into windows and now I can't open the files on my mac. Help??

    I plugged my flash drive into windows and now I can't open the files on my mac. Help??

    What version of iPhoto?
    What format is the disk?

  • Can I use Photoshop Cs5 with windows 8? was told by tech guys at best buy that we couldn't.....

    can I use Photoshop Cs5 with windows 8? was told by tech guys at best buy that we couldn't.....

    You might want to check this thread. Some have had success with CS5 on Windows 8, others not so lucky.
    http://forums.adobe.com/message/4840878
    You can try and see for yourself,but I don't think the Best Buy techs were trying to upsell you.
    Gene

  • I am using Windows Vista running ver 9 of Internet Explorer.  Can I use iCloud drive with my PC?

    I am running Windows Vista Business on my PC.  I have ver 9 of Internet Explorer.  Can I use iCloud drive on my machine?

    Has any one helped you?

  • MDT Image Deployment Using Flash Drive

    Hi,
    In my environment i am using MDT 2010 image deployment process to deploy Windows XP and Windows 7 OS images,
    As image deployment is foccussed on multiple remote locations we have planned to move with USB Flash drive (Pen Drive) for image deployment,
    The problem occurs here in normal system through diskpart utility i can able to get all the disks including my flash drive but in win pe mode i am unable to get my flash drive listed in diskpart utility.
    so the image deployment process hangs on to the microsoft solution accelerator screen i am unable to predict the actual reason but i can predict this can happen because of mass storage driver problems.
    I tried the same using USB Hard Disk and succeded with the deployment and i am unable to guess what makes difference between USB Hard disk and USB Flash Drive.
    Can you just help me out on this to close the problem ASAP..
    So that i can proceed with my roll out activities.
    Thanks in advance,
    Siva

    Hi,
    At last the image deployment using flash drive works for me.
    I attempted the following steps,
    First i converted the flsh drive to bootable flash drive using diskpart utility,This can be done in Windows 7 Operating system only.
    navigate to cmd and type Diskpart,and enter the below commands,
    List disk
    Select Disk no
    create partition primary
    select partition no
    active
    format fs=ntfs
    Assign
    Exit
    Upon completition,Insert windows 7 DVD to the system and do the following
    Navigate to DVD Drive in my case it is G: and change directory to boot
    G:cd boot
    G:\Boot>Bootsect.exe /nt60 I: where I: is my flash drive
    Then copy the contents to the Usb flash drive and change the first boot device of the target system to local hard disk and deploy the image
    while in Win pe mode use disk part utility to check whether your disk got detected.
    If everything is ok then it will work.
    Thanks for your valuable time.
    Thanks and Regards,
    Siva
    Thanks Siva Aadhi-CIT. MCITP

  • Use external drive for windows and mac

    Hello,
    I just bought a external 320Gb Western Digital Drive. I would like to use
    the drive for windows and mac.I will not like to make partation on the drive
    to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
    Thanx.

    If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

  • [pavilion g7-2116sr] How can I use amd driver with only integrated graphic?

     Radeon hd 7670m is disabled coz it's broken. Amd driver don't work. Windows use vgasave driver. How can i use amd driver with radeon hd7660g?
    P.S.  Sorry, my english isn't good(

    Hi @Leys 
    I see you are stilll unsuccessful installing the drivers as you get the blue screen.
    Here is a link to Computer Does not Start (Windows 7, Vista, XP) that may help.
    Here is a link to Testing for Hardware Failures (Windows 7, Vista) to determine if your graphic card is defective.
    If the graphic card fails, here is a link to the HP Pavilion g7 Notebook PC Maintenance and Service Guide. Please note page 9 or chapter 1 page 9 for a list of recommended replacement graphic cards.
    If the graphic card passes you may wish to consider doing a restore back to a known good time or a full recovery back to factory.
    Using Microsoft System Restore (Windows 7)
    Performing an HP system recovery (Windows 7)
    During the recovery process there is an option to backup your personal files to prevent data loss.  If you have not done one yet I suggest you do one now.
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
    At any time you may wish to contact HP support for assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Storage spaces can only use whole drives

    One of the features that I was really interested in with WS2012E is storage spaces as it replaces the old driver extender of WHS v1. Having now installed WS2012E onto my WHS2011 box I am bit staggered to find that it can only use whole drives. My box came
    with 2 * 2Tb drives, the first partitioned as boot, then a 60G of OS followed by the rest allocated as storage. I have successfully created a Storage space pool of the second drive but cannot find any way to add the remaining storage from the large partition
    on the other drive into the pool. As the UI just shows me drives rather than partitions, I am bit challenged. I thought that storage spaces was meant to be flexible about adding drives just like the old drive extender. Even add on technolgies like DriveBender
    for WHS2011 allows for a storage space to be made up from this type of set up. So we seem to be going backwards.
    Plus when creating the drive pool it defaulted on a 2Tb drive to a 2Gb size! How useful is that? As soon as I started copying data to the drive it ran out of space. I then had to go in and expand it.

    I note that you did this with Windows Server 2012 Essentials.  I cannot seem to do this with Windows 2012 Standard.  I have two 500 GB disks and 40GB of the first disk, PhysicalDisk0 is partitioned for the OS.  Nothing I do makes PhysicalDisk0
    show up in the Storage Pool area of Server Manager - all I can see is PhysicalDisk1.  (Refer to 'Physical Disks' in the bottom right corner of the previous poster's first screen shot above.  I can only see 'PhysicalDisk1', not 'PhysicalDisk0'.)  If
    I click 'Disks' just under 'Volumes' in the same screenshot above, I can see PhysicalDisk0, and it shows 466 GB capacity, 423 GB unallocated.  PhysicalDisk1 shows 466 GB capacity, 466 GB unallocated.  My intent was to mirror the remaining 423 GB
    on PhysicalDisk0 with 423 GB on PhysicalDisk1.  I would then allocate the leftover 43 GB on PhysicalDisk1 as a 'scratch' disk.  I have tried leaving everything unallocated and have tried all variations of creating volumes and virtual disks, but nothing
    I do makes a difference.  I found other threads related to this issue which indicated there was a flaw in the 2012 GUI and that this process could be done via Powershell.  However, there seems to be a mix of Windows 8 and Windows 2012 in these threads
    and, apparently the Powershell commands I've found apply to 8 and not 2012, as I get invalid command errors when I try to use them.
    Can anybody tell me how to mirror the unallocated portion of the primary disk PhysicalDisk0 (which has a partition for the OS) with a same-sized portion of PhysicalDisk1 with Windows Server 2012?  Thanks!

  • How to install USB flash drive in windows 7

    Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.   

    Hi,
    Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
      http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&​cc=us&docname=c00033108
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for