Can I use full load for daily loads in LO Cockpit extraction.
I am using LO cockpit extraction for 2LIS_11_VAITM and i am using delta load for daily load and I have following doubt.
Can i use full load for daily loads instead of delta in LO Cockpit extraction.
Because, my understanding is that full load always takes data from setup tables in ECC and set up tables will not have delta data.
pls reply. Thanks.
You are right abt the understanding that full load (atleast for the extractor at hand) brings data from setup tables. You are also right that delta records are not loaded into setup tables.
So if you plan to do full loads every day, you have to load the setup tables everyday. It is at this juncture that I have to remind you that, filling of setup tables requires a downtime of the system to ensure that no changes / creates happen during the process.
Hence performing a full load is not a very good approach to go by...especially when SAP made the job easy by doing all the dirty work of identifying changes and writing them to extraction queue.
Hope this helps!
Similar Messages
-
Inventory cube load: can I use full load?
hi,
I have an inventory cube with non-cumolative chars. Can I use full load option or I thave to load with delta for non-cumulative KFs?
Regards,
AndrzejHi Aksik,
The load will not matter in the Addregation option.You can load by full or delta.
Now the reports creation has to be done with this in mind that the figures has to come correctly.Specify the aggregation required in the properties of the keyfigure in the query.If required use a ODS in the data flow.
regards
Happy Tony -
If your database in Full Recovery mode, can you use Bulk Insert Task to load data
If your database in Full Recovery mode, can you use Bulk Insert Task to load data
If your database in Full Recovery mode, can you use Bulk Insert Task to load data
Yes you can ofourse but dont be in idea that logging will be mininal. Loggign will be as per recovery model full. Every thing will be logged. If you are going to use bulk insert task you can consider switching recovery model to Bulk logged but you will not
have option to do point in time recovery.
PS: please dont create duplicate threads
If you read first Note section in below link it clearly states that yes logging will be full and you can use
http://technet.microsoft.com/en-us/library/ms191244(v=sql.105).aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Hi Any body Knows How to use CAT Tool for Up Loading?
Hi
If any body knows how to use CAT Tool for up loading transactions, explain the steps.
Our requirement is, we want to up load transactions like Oppor , Quotation,Order etc...we want to up load these transcations from Local system to CRM Server
how to do this? Let me know the steps.
Regards
VenkatIf you have 10,000 or less, CATT is a reasonable method, but I would suspect that you have far more than that if you're needing to load transactions.
LSMW is probably a better way to go if you have more than 10k, but I am not familiar with LSMW -
Can i use vps's for linux edge server's???
I can stream to edge server on fme------>windows7-edge ------> origin-linux-dedicated--and or--vps------>website works...
but cant do fme---->linix-edge-vps------>linux-orgin-dedicated--or----vps------>website Doesnt work
nore can i do fme------>linux-edge-vps--->windows7-origin---->website Doesnt work
All using latest centos tried and same results with ununtu
so am i out of luck for using vps's?
any help would be great thanksyeah no that doesn't work but get this...
when i publish to windows edge server the signal gets sent to origin vps then to viewers...
but if i make windows origin and vps edge server is does not work dont understand why this is happening
Date: Wed, 22 Dec 2010 01:45:19 -0700
From: [email protected]
To: [email protected]
Subject: can i use vps's for linux edge server's???
I agree load balancing part but load balancing should be done in context of subscribing and not in terms of publishing. You can do failover in context of publishing using Multi-point publish.
If you publish directly to origin and then introduce edge servers for subscribing do you still face issue.
I mean if you set up your linux VPS as edge and then subscriber goes through that edge - say like rtmp://linuxedge/?rtmp://origin/live - does this work?
Can you try that out and let me know.
> -
Why no exclusive lock for conventional path loading for SQL*Loader?
why no exclusive lock for conventional path loading for SQL*Loader?
it use insert statement so it should use exclusive lock right?
thanksok, so only update statement would put a lock but not for insert statement?
because I have seen a situation where a user update rows in a sesssion (without commit) prevent another user update the rows.
thanks -
Can I use one account for both my labtop and my ho...
can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
Can I use touch ID for App Store without using a passcode?
It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??
From the article:
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting
and
You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
Regards, -
HT3354 how can i use one table for reference to another
how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using
you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware -
Can I use same account for android and PC and how ...
Can I use same account for android tablet and PC and how do I link both?
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
Can I use a domain for one site and mobile me for a different site?
Can I use a domain for one site and mobile me for a different site?
I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
OT -
Have iPad, iPod Touch and iPhone 4s. Can I use one charger for all
I have and iPad, iPhone 4S and iPod 4. Can I use one charger for all 3 and if so, which one. TZ all
You can use the iPad charger for all.
-
In Bte can i use same Product for 2 different process
in Bte can i use same Product for 2 different process
hi
as per i know yes but since there r two type of interface behaviour is defferent .
For
Publish & Subscribe interfaces
if any event occur in this type both the process can work simultaneously and they will not intervene each other
whereas in
Process interfaces
at an time any one process can be active.
Reward if usefull
Cheers
Snehi
Maybe you are looking for
-
latest version loads the main banner of page then takes too much time loading the content of page > I have even had to stop the page loading and refresh before it will load properly> I did not experience this before installing the latest version the
-
Problems with Pages and Numbers using iCloud Drive on early 2008 MacPro, Yosemite
One of my computers, an early 2008 MacPro running Yosemite, will NOT save Pages or Numbers documents to iCloud Drive from within those applications. I see the little iCloud Drive error badge next to the file name in Finder after I try to save. Howe
-
How to keep the overall sales price same after basic material cost changes
We have a below requirement from clientu2026 Sales Order with quantity 100 created. Letu2019s say the Basic material cost is $10 each and after the pricing procedure of SD (i.e taking condition types etc in account) overall sales order price came to
-
How to Populate Materialk number in special ledger
Hi, We have special ledger ODS where we have material number as data field. But its not getting populated. The table in R/3 used for special ledger extractor doesnt have Material number. How to populate material number in BW for special ledger? T
-
Can i use execption in forall like below proc
CREATE TABLE X_TEST1 (X_NO VARCHAR2(8), X_SAL NUMBER,X_NAME VARCHAR2(10) ); CREATE TABLE X_TEST2 (X_NO NUMBER, X_SAL NUMBER,X_NAME VARCHAR2(10) ); CREATE TABLE X_TEST3 (X_NO VARCHAR2(8), X_SAL NUMBER,X_NAME VARCHAR2(10) ); INSERT INTO X_TEST1 VALUES