Can I use Guitar Rig 4 Sessions I/O with Adobe Audition CC? Thanks, Al :)

Hey,
I only need Guitar Rig to power my microphone because it requires phantom power. I've never actually been able to use the effects available on Guitar Rig because I always found it too confusing and never understood how to, so I'm not bothered about using the effects. I've changed the preference settings, but it just won't let me record in a multitrack session. It records on a single track (before you start a new multitrack session), however, it will not let me play it back. I've tried different preference settings, but nothing works! I tried to attach screenshots to show my preferences, but it wouldn't work :/
I would really appreciate it if you could help me!
Thank you,
Alexis

Hi
Yes... absolutely:
1st you need to download the Controller Editor from NI, then you need to configure the RK to work in "MIDI Mode". Assign the switches & pedal(s) to whatever CC's you wish.
Then, in Mainstage, create the screen controls and MIDI Learn them.
You may need the latest RK drivers too.
HTH
CCT

Similar Messages

GarageBand stops recording immediately when using Guitar Rig Session

When I try to record a guitar into GarageBand using my Guitar Rig Session the recording starts, then immediately stops. This happens on a new track, or on an existing track. Everything was fine before I updated GarageBand to the latest version (6.0.4) via the App Store. I also updated to OSX 10.6.8 too. I've tried recording a track in Reaper and it works fine so I doubt it's a Guitar Rig/OSX 10.6.8 issue so I'm suspecting that it's the latest GarageBand version that's to blame. This discussion was the closest thing I could find to raise a support ticket about this. I'll have to switch to Reaper for now but if it's not fixed soon, I may not come back to GarageBand!

Native Instruments say they'll have a fix to make their software work in Lion in September. From what I've heard it only affects them running in 64 bit mode so try Guitar Rig in 32 bit mode if you can. I've switched to Reaper like I said and I'm finding the transition quite easy. Give their demo a try...

Can i use my GPU NVIDIA GTX 980 with Adobe Premiere Pro CC 2014 ?

Hello,
Sorry for my english , i'm french.
I need your help because when i read a video in 4K , it's not fluid.
I have a GTX 980 and 16 GB Ram, Intel Core i7 3770.

Bonjour Gauthier,
I need your help because when i read a video in 4K , it's not fluid.
I have a GTX 980 and 16 GB Ram, Intel Core i7 3770.
Check your Project Settings > General. Under Video Rendering and Playback > Renderer, is it set to "Mercury Playback Engine GPU Acceleration (CUDA)?" If not, enable it, and then see if your performance improves.
Thanks,
Kevin

Logic Pro can't find Guitar Rig 5

I just downloaded Guitar Rig 5 Pro, and I have activated it. But I can't seem to find it in Logic Pro. It's not under I/O and AU instruments. I have Kontakt 5 and Reaktor 5, but Guitar Rig is not there. Doesn't Guitar Rig have any library and sounds?
I only bought Guitar Rig to get different types of guitar sounds.
Guitar Rig is in the correct folder, named .components. When I try to rescan Guitar Rig is listed as Guitar Rig 5 FX and Guitar Rig 5 MFX. Still can't find Guitar Rig in Logic Pro.
I'm able to open Guitar Rig 5 as a stand alone, but not able to play any sounds. I don't play guitar, I only have a MIDI-keyboard.
Have Logic Pro 9.

No.. GR5 is a Guitar Amp emulator... You can take an electric guitar instrument like those found in Logic Pro's instrument plugins.. and then put GR5 in an effect slot and select various different effect presets to create the sound of different guitar sounds.. like Heavy Metal or Blues guitars.. or emulations of sounds from famous guitar solos....
You still have to play your keyboard to 'play' the guitar but with careful practise you can get pretty authentic sounding guitars to add to your songs....
I made a quick demo a while ago using some of the guitar instrument presets in LPX along with the effects created in GR5
https://soundcloud.com/the-art-of-sound-1/heartbeat
It should give you an idea of what is possible, if nothing else...

Using Guitar Rig

Think I found some limitations on using Guitar Rig with Mainstage. I have also posted this on NI's forums for some sort of resolution.
It appears, even though you can control just about every other parameter of GR in Mainstage, you are not able to assign a Mainstage controller to a GR controller. Therefore any mappings within GR you have assigned to a controller (i.e. effect on/off, parameter moifier, etc.), you can not set that controller to be set by Mainstage. Also, I see no way to change the GR patch directly within Mainstage as appears to be available on such things as the EXS.
Also, you are not able to set GR as a software instrument with the guitar input on the sidechain within Mainstage. You still can in Logic Pro, but it is not available in Mainstage. Perhaps this is why those patches and controller assignments can not be controlled?
Anyone have any idea how to get this functionality working in Mainstage?

Think I found some limitations on using Guitar Rig with Mainstage. I have also posted this on NI's forums for some sort of resolution.
It appears, even though you can control just about every other parameter of GR in Mainstage, you are not able to assign a Mainstage controller to a GR controller. Therefore any mappings within GR you have assigned to a controller (i.e. effect on/off, parameter moifier, etc.), you can not set that controller to be set by Mainstage. Also, I see no way to change the GR patch directly within Mainstage as appears to be available on such things as the EXS.
Also, you are not able to set GR as a software instrument with the guitar input on the sidechain within Mainstage. You still can in Logic Pro, but it is not available in Mainstage. Perhaps this is why those patches and controller assignments can not be controlled?
Anyone have any idea how to get this functionality working in Mainstage?

Using Guitar Rig 4 / Amplitube 3 in Logic Pro

Hi,
I'm using Guitar Rig 4 and Amplitube 3 as inserts in my Logic 9 projects and all is working fine.
However neither GR4 or A3 respond to MIDI cc changes from my Apogee GIO foot controller. I've been able to get both products to respond correctly to patch/stompbox changes on the Apogee GIO when used "stand alone".
It looks like when used as an "insert" the Apogee Gio MIDI cc info is not getting thru - When using Ampdesigner/Pedelboard (which I don't very often) the Apogee GIO MIDI cc functions correctly.
Is there a way of getting the MIDI CC messages thru to an insert?
Thanks for you help

Insert them as "Midi controlled AU" Plugs into an instrument slot, there is an xtra folder for those Plug-Ins and many manufacturers supply these versions.

Can I Use Oracle DB 11g Express Edition with Atomikos Transactions.

Hi,
Any Help is appreciated.
Im able to use Oracle 11g Standard/Enterprise Edition with Atomikos for XA transactions.(XADMS).
My question is Can I Use Oracle DB 11g Express Edition with Atomikos for XA Transactions.
Thanks,
kensuser

Hi,
Thanks for the answer.What jdbc drivers should I use. Because still Im getting exception when using Oracle 11g XE.
But the same application runs with Oracle 11g Standard/Enterprise Edition.
Here is my Exception trace: Sorry, I'm a first time user, so pasting the exception as it is, will find out how to format the same, as use this forum. ant help is appreciated. Thanks in Advance
SEVERE: Exception sending context initialized event to listener instance of class org.springframework.web.context.ContextLoaderListener
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'UIToolAdminkit': Invocation of init method failed; nested exception is com.atomikos.datasource.ResourceException: XA resource 'EXXADBMS': resume for XID '3139322E3136382E35352E31382E746D30303030313030313937:3139322E3136382E35352E31382E746D31' raised -3: the XA resource detected an internal error
     at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor.postProcessBeforeInitialization(InitDestroyAnnotationBeanPostProcessor.java:135)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsBeforeInitialization(AbstractAutowireCapableBeanFactory.java:393)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1437)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:518)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:455)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193)
     at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:585)
     at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:913)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464)
     at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:381)
     at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:283)
     at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:111)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4206)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4705)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:840)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463)
     at org.apache.catalina.core.StandardService.start(StandardService.java:525)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:754)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:595)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414)
Caused by: com.atomikos.datasource.ResourceException: XA resource 'EXXADBMS': resume for XID '3139322E3136382E35352E31382E746D30303030313030313937:3139322E3136382E35352E31382E746D31' raised -3: the XA resource detected an internal error
     at com.atomikos.datasource.xa.XAResourceTransaction.resume(XAResourceTransaction.java:500)
     at com.atomikos.datasource.xa.session.BranchEnlistedStateHandler.<init>(BranchEnlistedStateHandler.java:57)
     at com.atomikos.datasource.xa.session.NotInBranchStateHandler.checkEnlistBeforeUse(NotInBranchStateHandler.java:66)
     at com.atomikos.datasource.xa.session.TransactionContext.checkEnlistBeforeUse(TransactionContext.java:85)
     at com.atomikos.datasource.xa.session.SessionHandleState.notifyBeforeUse(SessionHandleState.java:176)
     at com.atomikos.jdbc.AtomikosConnectionProxy.enlist(AtomikosConnectionProxy.java:204)
     at com.atomikos.jdbc.AtomikosConnectionProxy.invoke(AtomikosConnectionProxy.java:138)
     at $Proxy13.prepareStatement(Unknown Source)
     at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
     at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
     at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
     at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1573)
     at org.hibernate.loader.Loader.doQuery(Loader.java:696)
     at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
     at org.hibernate.loader.Loader.doList(Loader.java:2228)
     at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2125)
     at org.hibernate.loader.Loader.list(Loader.java:2120)
     at org.hibernate.hql.classic.QueryTranslatorImpl.list(QueryTranslatorImpl.java:935)
     at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:196)
     at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1148)
     at org.hibernate.impl.QueryImpl.list(QueryImpl.java:102)
     at org.springframework.orm.hibernate3.HibernateTemplate$30.doInHibernate(HibernateTemplate.java:921)
     at org.springframework.orm.hibernate3.HibernateTemplate$30.doInHibernate(HibernateTemplate.java:1)
     at org.springframework.orm.hibernate3.HibernateTemplate.doExecute(HibernateTemplate.java:406)
     at org.springframework.orm.hibernate3.HibernateTemplate.executeWithNativeSession(HibernateTemplate.java:374)
     at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:912)
     at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:904)
     at com.kensho.common.UIbundlDAOImpl.findAll(UIbundlDAOImpl.java:13)
     at com.kensho.common.UIbundlDAOImpl$$FastClassByCGLIB$$6f2db14b.invoke(<generated>)
     at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:191)
     at org.springframework.aop.framework.Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:689)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)
     at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
     at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:622)
     at com.kensho.common.UIbundlDAOImpl$$EnhancerByCGLIB$$8797972a.findAll(<generated>)
     at com.kensho.common.UIToolKitAdminBBean.getAllBundleItems(UIToolKitAdminBBean.java:37)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor$LifecycleElement.invoke(InitDestroyAnnotationBeanPostProcessor.java:346)
     at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor$LifecycleMetadata.invokeInitMethods(InitDestroyAnnotationBeanPostProcessor.java:299)
     at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor.postProcessBeforeInitialization(InitDestroyAnnotationBeanPostProcessor.java:132)
     ... 29 more

Can I use more than one iTunes account with my apple TV?

Can I use more than one iTunes account with my apple TV?

That depends what you mean. If you mean can you purchase from more than one iTunes account on the Apple TV, then the answer is no. If you mean can you stream from more than one iTunes library, which use different accounts, then the answer is yes, so long as they both use the same ID and password for homesharing.

Can I use iCloud to sync two devices with different apples Ids?

Can I use iCloud to sync two devices with different apple ID's

What do you mean by "apple ID"? There's an ID you can use at the iTunes store to buy songs, apps, etc. there's an ID you can use for your iCloud account - the two can be different or the same. So which service are you referring to when you talk about an apple ID?

Can I use ARD to control my mac with Back to my Mac service?

Can I use ARD to control my mac with Back to my Mac service?
The with Back to my Mac service on you see your mac in the Shared column, hit Share Screen & your good - on ARD I don't see my remote Mac listed anywhere in that program.
Thanks

ARD, to the best of my knowledge, does not work via Back To My Mac. Certainly it's not an direct or obvious feature, though I can't say that there might not be a workaround I've not heard of.

Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both

Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both. Want to give one to wife.do I need to open a new iTunes account for her?

bashepard wrote:
Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both.
Yes, No problem at all.
Want to give one to wife.do I need to open a new iTunes account for her?
No - you can share the same iTunes account (my wife and I share the same account). But when you sync the iPads, just remember to select the correct content for her iPad and the correct content for your iPad.

Can i use an old eprint email account with a new printer?

can i use an old eprint email account with a new printer?

Hello arbazu,
Unfortunately, when setting up a new/replacement printer, you wont be able to use the same email address, nor can it be transferred to another printer. Once an email is used, the email address itself is not able to be used for a certain period of time (which I believe is 6 months).
However, by creating a new email address, but adding an 01 or 02 at the end, you can get something very similar to what you had previously.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable?

Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable? I have a double ended USB connector if necessary.

No.
You need to use this.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a
or this
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a

Time Machine: Can I use a smaller external hard drive with larger internal?

Can I use a 250G external hard drive with and 500G unfilled internal drive with time machine? Or will time machine require I a 500G? I don't plan on filling the internal drive for a long time and don't want to buy a new external drive right now.

Yes, but you are very likely to get in trouble very quickly.
The problem is that TimeMachine saves multiple versions of any file modified, and if that file happens to be large, you can quickly fill up your TimeMachine drive such that it is throwing away older versions faster than you would desire.
Also if your boot drive's storage usage gets even close to the 250GB external drive's capacity, TimeMachine is likely to stop working.
If possible, I would suggest an external drive that is twice as large as your boot drive, or at least 1.5 times larger.
I guess you could repartition your boot drive so it is smaller than your external disk so you would be less likely to use more space than could fit on the external.
Personally, my opinion about backups is that much of my data is impossible to replace (family pictures, etc...), and spending money on backup hardware is a small price to pay for securing those memories. I also try to have it backup in more than one location in more than one way.

Can I use a solid state drive (SSD) with a G4 1 GHz powerbook? If so, how do I do it?

Hi:
Can I use a solid state drive (SSD) with a G4 1 GHz powerbook? If so, how do I do it? Thanks.
fromx001

fromx001 I believe you can use a SSD as internal drive, of course make sure to buy an ide/ata. There are all sorts of sizes up to 480 GB also in the ide/ata standard. You should however research carefully your purchase, as the performances of your SSD are going to have to rely on firmware "garbage collection", as the older operating systems haven't been written with SSD in mind.
Mac Man JW: some people depend on Classic as a brody said, other people need a phone modem from time to time, other people use the laptop in harsh environments, and at -15C and below, LCD screens easily crack and break; NOT the powerbook which has hot air towards the screen (and it's a machine that heats quite a lot). My alu Powerbook 12", which was *not* treated with velvet gloves, only once had a cracked screen: a cleaning lady had stepped over it (!!!!) no joke. And in normal / light use today, it is still pretty decent and usable.

Can I use Guitar Rig 4 Sessions I/O with Adobe Audition CC? Thanks, Al :)

Similar Messages

Maybe you are looking for