Can i use Handle C with the LABVIEW FPGA module?

Hi,
Can i use Handle C with the LABVIEW FPGA module?  I am working with CompactRIO right now so, i want to know weather i can use Handle C with CompactRIO.Can i access FPGA in compactRIO independant of LABVIEW  means can i program it without using LABVIEW?
regards,
Vishnu.

Hi Vishnu,
Although we don't support Handel-C directly, it is possible to design your algorithms using 3rd party tools or system integrators and consume them from a top-level LabVIEW VI. The webcast at http://zone.ni.com/wv/app/doc/p/id/wv-268 shows an example of how you can use IP from C-based tools provided by Celoxica in the LabVIEW FPGA environment.

Similar Messages

  • Labview 2010 Student Edition, will it work with the Labview FPGA module and Xilinx Spartan 3E??

    Just as the title states.
    I did a search here on compatibility, but I am coming up short with not much to show for it.
    I have Labview 2010 student edition, 32bit and 64 bit. I am trying to do a Senior Design project for my undergrad, and I am having some issues.
    I was able to download the Support for the Xilinx Spartan 3E and Labview FPGA.
    I install it, it runs through the unzipping process, installs, and then mysteriously I cannot find it. I have looked through my programs list and it is not listed. I open both editions of LabView and I find ABSOLUTELY NOTHING indicating that either one has ANYTHING to do with FPGA.
    Did I install it wrong? Or is it just not supported in the studend version of Labview???
    Can someone help me, please?

    M Boat wrote:
    What about the trial version? Any chance of it being on there?
    I think everything is available for download, and without activation it will be in trial mode and you have about a month (?) before the trial expires.
    A trial version of the FPGA module is available for download here. I have no idea if it would work with the student version.
    I would recommend to talk to your local NI sales representative for advice. Good luck.
    LabVIEW Champion . Do more with less code and in less time .

  • How can i use text expander with the new Mavericks,

    how can i use text expander with the new Mavericks,

    I regret upgrading to mavericks for the same reason
    ftamez wrote:
    how can i use text expander with the new Mavericks,
    Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

  • Can i use a pendrive with the ipad mini 2 and access the files in the pendrive

    can i use a pendrive with the ipad mini 2 and access the files in the pendrive

    I've literally had a 50/50 success rate with drives. But even if you get it to work, all you'll be able to access are photos or videos that follow a very strict naming convention. You cannot access documents or music, and you cannot write anything off the iPad onto a flash drive.
    If you want to access photos or videos, you'll get more reliable results with an SD card than fighting with a USB drive.

  • Can I use a mouse with the NB505-N508BL 10.1-Inch Netbook ?

    I hate scroll pads - can you use a mouse with the NB505-N508BL 10.1-Inch Netbook?   Thanks -
    Solved!
    Go to Solution.

    mini notebook NB505-N508BL
    Sure you can use a mouse.
    Lots of good stuff in the User's Guide.
       NB500 Series User’s Guide
    See the section Using a mouse on p. 70.
    Try Fn + F9 to turn off/on the touchpad. See Disabling or enabling the TouchPad on pp. 68 and 174.
    -Jerry

  • Can i use PC400 RAM with the Tecra A4 (Pentrium 750)

    Can i use PC400 RAM with the Tecra A4 (Pentrium 750), currently PC333 is mounted.
    Thank you

    I dont know if you can use it but as far as I know Toshiba recommend using these modules on the Tecra A4:
    PC2700 256MB (PA3311U-2M25)
    PC2700 512MB (PA3312U-2M51)
    PC2700 1024MB (PA3313U-2M1G)
    These are single channel 166MHz DDR333/PC2700, DDR SDRAM, 200-pin SoDIMM modules.

  • Can I use external speakers with the iPad when using Facetime?

    Can I use external speakers with the iPad when using Facetime?  How do I do that?

    They have to be either plugged in via headphone jack or the dock port at the bottom. If you can. I've used it on apple tv, but that's it. I don't know if the others work, but I don't see why not. Try plugging in speakers in the headphone jack. You will get an answer :)

  • Can I use a mouse with the Macbook Air?

    Can I use a mouse with the Macbook Air or am I limited to the touchpad?

    I had been wondering for awhile if I can use a mouse with a MacBook air if I was to get one (MacBook air) some years down the road (probably within 20 years).
    Now I know and I can. 

  • LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred

    Hi,
    I am trying to build a LabView FPGA VI. During compilation, I always get error stating "LabVIEW FPGA:  An internal software error in the LabVIEW FPGA Module has occurred.  Please contact National Instruments technical support at ni.com/support".  At the time, comiplation process is almost at the end.  "Final Timing (place and route)" shows as completed. When Checked the Xilinx log session, at the end it states that "  Process "Generate Programming File" completed successfully". However, I do not see any generated bitfile.
    When clicked on error details, it shows following: 
    LabVIEW: An unknown error occurred.
    Error -2629 occurred at Error occurred while loading XML string. Invoke Node in niFpgaXml_PrettyPrint.vi->niFpgaWriteBitfileXml_Core.vi->niFpgaCompileWorker_CreateBitfile.vi->niFpgaCompileWorker_JobComplete.vi->niFpgaCompile_Worker.vi:6460001
    Possible reason(s):
    LabVIEW: An unknown error occurred.
    I tried multiple times but so far no luck to generate bitfile for this VI.  What could be wrong here?
    I am using Labview 2013

    Hi Mark,
    Here is the device utilization Summary. My development system is running with Windows-7 (32 bit) with 3GB RAM and Labview 2013. 
    Device Utilization
    Total Slices: 90.0% (11970 out of 13300)
    Slice Registers: 40.7% (43258 out of 106400)
    Slice LUTs: 71.6% (38103 out of 53200)
    DSP48s: 1.4% (3 out of 220)
    Block RAMs: 22.1% (31 out of 140)
    Timing
    40 MHz Onboard Clock
    : 40.00 MHz (57.90 MHz maximum)
    80MHz (Used by non-diagram components)
    : 80.00 MHz (100.19 MHz maximum)
    --WillsG

  • How do I install Labview 64 bit support for the labview fpga module?

    see subject.

    Hi,
    The LabVIEW FPGA Module uses the 32-bit version of the Xilinx tools, even on the 64-bit OS.
    There is no 64 bit version of LabVIEW FPGA and you must have LabVIEW 32 bit
    installed on your 64-bit machine to use the compatible version of
    LabVIEW FPGA.
    NI LabVIEW FPGA Module will run within the 32-bit emulation layer, Windows on Windows (WOW64).
    regards,
    Houssam Kassri
    NI Germany

  • Can I use 2 iPhones with the same iTunes account? help...

    At the moment I have an iPhone 3G but my wife doesn't. I have a Windows Vista machine at home that has all our music in iTunes and all the apps I have downloaded from the app store. We only have 1 login to our windows vista PC that we share, we don't have individual signons.
    On Friday I will be upgrading to the 3Gs and my wife will also be getting one.
    My question is can we sync both iPhones with the same PC using the same Windows login and the same iTunes account, i.e. share all music and apps with both iPhones?
    Thanks

    A computer can sync a dozen iPods and/or iPhones (just saying).
    However, You can't use more than one computer for that iPhone.

  • Can I use an adapter with the output stats: 5.2 volt and 1.0 amp for my iPod Touch 4g?

    Hello, I bought an iPod touch from apple store. I got the cable with one part to the iPod and the other USB. But i didn't get an adapter to make it possible to connect the USB to an adapter and then into the wall jack.
    So I had one at home with these stats: 5.2 volt and 1.0 amp. Can I use it to charge the iPod Touch or is it "unhealthy" for the battery?
    Kind Regards
    Kiwiii

    It shuld be fine. It is within the tolerance for USB 5 Volts.

  • Can I use my Iphone4S with the Bose Series II sound dock

    I have an Iphone 4S and a borrowed Bose Series II sound dock. Can I use my Iphone with this Bose and play my fav radio station from the internet? Or is this Bose only for IPod?

    bluetooth is likely closed when the iphone is suspended if not then you could use it as alarm clock but
    bluetooth use battery so if not connected to AC it would likely suck your iphone dry in the night

  • Can I use multiple computers with the same iPod?

    Hello all, I own a desktop computer, and just recently bought my first laptop. I have iTunes already installed and my iPod synced on the desktop. Now I just installed iTunes on the laptop, and want to sync the iPod on the laptop also, so I can have two computers synced with the same iPod. Can that be done? Any info is greatly appeciated, thank you.
    Tim H.

    what Niel said is correct.
    however, there might be a (semi) workaround. check this thread for pointers: http://discussions.apple.com/message.jspa?messageID=11524444#11524444.
    JGG

  • I have a product code for my photoshop c6 under a different account that i cant remember. how can i use my software with the product code that i have with the new user i made?

    I have a product code for my photoshop c6 and i used a different account to register this software. how can i use this product that i have with my new account that i just made?
    please advise
    I dont have the serial number so yeah
    i have a product code

    Contact Adobe Customer Service directly by phone or web chat (they don't do email).  They don't do email.  If you can provide proof of purchase to their satisfaction, they may be able to help you.
    These are user forums, so you're not addressing Adobe here.  We can't help you with this type of issue.

Maybe you are looking for