Can i use icon preview in an "open" dialogue box?

Is it possible to use icon preview (see the icon of a jpg file as a thumbnail) when browsing folders from an "open/save" dialogue box? Is it even possible to use icon preview when using column view in Finder?

the problem is, if i only use the preview column (like you describe), i have to actually select every file in a folder, one at a time, until i see the image i'm looking for. what i would like to do is to see an actual thumbnail of the image as the icon itself so that i can select a folder and then see all the images listed in the column beside it. i need to upload groups of images to the web, and i need to select a different combination of photos each time. (using Transmit) i'd like to scroll through the column view (in a dialogue box) and cmnd-select all the images i want to upload together. some folders do have thumbnail icons in column view mode and others do not, but i can't figure out how to get my folders (which do show thumnail icons if in icon view mode) to become some of the ones that do show thumbnails in column view. i can't figure out what the difference is in the folders, image files, or view settings that makes the difference. the cmnd+J view options seem to apply only to Finder, but the problem i'm looking at is related more to some kind of SystemUIServer or something.

Similar Messages

I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7. How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?

I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7. How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Can you use a gift card to open account?

Can you use a gift card to open an iTunes account?

Yes, I've done it myself.
See the I do not have an iTunes Store account section of the How to redeem an iTunes Gift Card on a computer section of the following document:
iTunes Store: How to redeem a code

How can we get icon previews back for alternate media files?

How - if ever - can we get icon previews back for alternate media files?

For the folder you're in do you have the View option set as shown in this screenshot?
What do you mean by alternate media files?
OT

I downloaded the latest Adobe Reader when prompted. Since then I cannot use Safari File Print to print web pages - the printer dialogue window opens but the page is blank. Also, when I try to use the safari Help button,the dialogue box is blank.

I downloaded the latest Adobe Reader update when prompted. Since then I cannot use Safari>File>Print to print web pages - the printer dialogue window opens, but the page remains blank. Also when I try to use the Safari Help button, the dialogue box opens but remains infuriatingly blank. Can anyone help me to solve this problem?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Solution manager can be used as repository DB with out-of-box integration?

Solution manager can be used as repository DB with out-of-box integration?
Hi ,
In Our Global SAP Environment, We are looking to use solution manager as a CMDB ( Config management DB) , which is kind of repository DB where it needs to keep track of infrastructure components .
A CMDB about Host consists of elements like
No. of CPUs,
RAM size,
...etc
For example in solman SMSY , you get some information about the SAP Host .
we have multiple CMDB systems , each one for our supplier .
For example Host hardware () CMDB is managed by Vendor1,
Storage CMDB by vendor 2 , and we need to join the both information , in order to get the Full elements of the Host .
A host information spread across the Multiple Vendor CMDBs.
Now we want to use solman as single CMDB, where Solman keeps track of some data , and needs to get some additional data from vendor1 by connecting into
their DB using the username/password ..etc
Does the solman has this Out-of-box functionality?
Thanks
Vasu .

Hi - smilar question
If we setup the system monitoring using solution manager , can we able see the TCodes & their screens from solman .
For example Can I able to control my ECC screens (SCC4, RZ10,SMLG,SALE,SPAD,SM59,.... ) from Solution manager ?
waiting for the reply .
Thanks
Vasu

No search results from "Open" dialogue box

In Mavericks OS 10.9.4, I get no search results when searching from an open dialogue box, i.e. open file from within Photoshop or some other program. Searching from within Finder works fine. Anyone else seeing this? Any solutions?
Mac Pro 2014
Mavericks OS 10.9.4

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe modeand log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Search not working in open dialogue box.

Why is it that after nearly TWO years the search function in the open dialogue box is still not working in inDesign? Why can it work when in the PASTE dialogue box but not the OPEN dialogue box? I discovered this fault years ago and wrote about it in length but it has yet to be addressed. Is there anybody else that is bothered by this?

Doc Maik.
I'm on a MAC. The dialogue box that appears when you OPEN a file. The search command in the top right corner (spotlight) does not work. Has not worked since the upgrade to CS6. See attached.

Open dialogue box in Lion is not supporting drag and drop files (UPDATE)

This is freaking me out. Because now in Lion you can't drag and drop file from the desktop (and other folders!) to open dialogue box. It was most usefull function in Mac OS X. Why Apple kill usabillity?
Access to the desktop is not a problem (command + d), but if the current file is located deep in the hierarchy of folders, it becomes a big problem!!!
Dear Apple, please fix it as soon as you can.
UPDATE: Omg, I found the problem, it works only if I drad and drop file on the bottom panel, not in all open dialogue box area:

Interesting, this is the second time today I've seen this one come up. It does work, drag and drop works like crazy everywhere here. What does console say when it happens (or not, in your case)?

Open Dialogue box with Webutil

I need to open Dialogue box with Webutil and choose file and its path aper in text box

Open the webutil.pll library, then look at the WEBUTIL_FILE package. It contains all you need.

How can I use my previews as "masters", wen the masters are irretrievably lost? My idea is to at least be able to save the lost pictures by using the Previews as the new "originals".

So, yes. Most of my master pictures are gone, long story - please don't ask why. The question now is whether I can use the previews (which are still there) which is surely better than nothing. But except for browsing, there's nothing I can do with them, unless they have a master file connencted. Has anyone got a clue how I could make Aperture treat these remaining preview as master files as well as previews, or in some way make this files useable.
Thank you very much for your help, if anybody out there has a clue how

So, yes. Most of my master pictures are gone, long story - please don't ask why.
I assume, your library is referenced? And the versions are now pointing to missing original master image files?
Then try the following - for each project separately.:
Select all images in a project and drag them from the Bowser to a folder outside the library. This will export the previews as jpegs.
Now - with the images in the project still selected - use the command "File > Locate Referenced Files" to open the "reconnect" window. In the upper part of the reconnect Window select the first of your images that needs to be reconnected, and in the lower part point it to the corresponding jpeg you exported. Hold down the alt/options-key⌥ to force the connect-buttons to appear. Press "Connect all".
Regards
Léonie
P.S: If the reconnect buttons refuse to become active, even with the⌥-key held down, check the filenames. The previews should be named exactly like the missing originals. I tried this in Aperture 3.4.5, but I am not sure, if it will work in all Aperture versions the same.

IPhoto 08 is gone...can see the icon but doesn't open. Any suggestions?

I was working on getting my Time Capsule to backup my MacBook and erased everything on there. When I restarted and got the time capsule to work i couldn't open my Iphoto anymore and cannot open any new photos that I download..
If I click on the icon it bounces then stops and nothing happens. When i search my applications folder the iphoto application is not there. When i search the "myname"macbook drive>iPhoto I can see the iphoto app. (doesn't open, crashes immediately), the contents folder (the plug-ins disabled and resources disabled items do not open)
Any help would be appreciated.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*What's the plist file?*
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
If that doesn't help:
Post the Crash Log.
It's at Home / Library / Logs / Crash-Reporter / iphoto.crash.log
Double click on the file and it will open in the Console. Copy and Paste it in here.
Regards
TD

Can't use down key because it opens automator. Does any one know how to disable this short cut?

Everytime I press down on down key it opens automator. It doesn't let me delete the app. I don't know what to do, it is very frustating to fill in a chart when I can't use the down key. Does any one know how to disable this short cut?

Are you talking about the Down Arrow key? To my knowledge there is no way to use that key as a shortcut for anything. But look in the Keyboard section of System Preferences and the Keyboard shortcut tab.

[IN CS4] Proof Colours - that can be used to preview pages in print Greyscale?

HI!
Although I have the library Greyscale ICC profile can not I use it in the option Preview Colors.
Can be used this options to preview CMYK pages in print Greyscale or other monochrome prints?

No. ID doesn't have a grayscale space. You can force a conversion to grayscale from the print dialog, but you can't get a color conversion to grayscale inside ID. Placed grayscales are color managed as if they are on the black plate of CMYK when Proof Colors is turned on and embedded grayscale profiles are ignored.
You could export a CMYK PDF and then preview the conversion to grayscale in Acrobat via the Simulation Profile in the Output Preview panel.

How can I use Private browsing alongside already open regular browsing window?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/816143]''
Hi,
Whenever I start Private browsing, all the tabs and windows which are already open closes and then the Private browsing window opens. All the tabs and windows reopen after I stop Private browsing. What I exactly need is to open a new Private browsing window so that I can continue using the existing tabs. Is there a way of achieving this in Firefox 4?

(also looking a solution)
There was an addon that did exactly this but it's discontinued now. It probably worked the same way as you laid out here.
Now is there another add-on that does the same thing?

Can i use icon preview in an "open" dialogue box?

Similar Messages

Maybe you are looking for