Can I use IF-RIO with LabVIEW 8.20

I am going to upgrade my LabVIEW to 8.20 but I am not sure whether the driver of IF-RIO can work with it properly.
Does anybody know this?

Hi,
       My customer get problems when using PCI-5640R in LabVIEW 8.2, but they could work in LabVIEW 8.0. Is there any latest NI-5640R driver support LabVIEW 8.2? Or PCI-5640R only works in LabVIEW 8.0? 
Operation system and environment:
LV 8.2
LV FPGA 8.2
NI-5640R 1.1
NI-RIO 2.1.3
Display error message in LV 8.2 FPGA complier server.
An internal software error has occurred. Please contact National Instruments
technical support at ni.com/support with the following information:
Error 1003 occurred at Open VI Reference in
nirviGetModInfo___nirviEIOImplementation_modGen.vi​->nirviGetModInfo___nirviE
IOImplementation_modGen.vi.ProxyCaller
Possible reason(s):
LabVIEW:  The VI is not executable. Most likely the VI is broken or one of
its subVIs cannot be located.  Open the VI in LabVIEW using File>>Open and
verify that it is runnable.
VI Path: C:\Program Files\National Instruments\LabVIEW
8.2\resource\RVI\StockIO\private\StockFPGA_io_modG​en\nirviGetModInfo_StockFP
GA_io_modGen.vi
Please refer the attached reproducable example code.
Best Regards
NITW AE
Gary
Attachments:
UsingFilterCore.vi ‏550 KB
filt20070509104003.zip ‏255 KB

Similar Messages

  • Can i use Python Matplotlib with labview?

    I have a python code that i want to develop a User Interface for, i found Labview, but can i still use all the add-ons and modules when i run the script in labview? basically, i just want to develop a GUI for my code and I want to use all the modules and add-ons that I had in my code. Addons and modules such as pylab, matplotlib, numpy, scipy, and so on. Thanks!
    Solved!
    Go to Solution.

    The only integration LabVIEW has with Python is that it can call scripts and use the output from those scripts.  Here is an example of how to do that.
    https://decibel.ni.com/content/docs/DOC-8995
    I would use a Python GUI Framework to control your Python application.  Here is a link to the Python Wiki on GUI Frameworks.
    http://wiki.python.org/moin/GuiProgramming
    Regards,
    Matt M.
    Applications Engineer
    National Instruments

  • Can I use USB 6008 with LabVIEW 6.1 RT?

    Hi there,
    I've been using LabVIEW 6.1 RT for my applications and so far I haven't felt the need to upgrade.
    However, I decided to try the USB 6008 and I'm learning the hard way that this device will only work with NI-DAQmx and apparently not with the latest NI-DAQ 7.4.2 (legacy)  In fact, I can't see the device in MAX 4.1
    Is there any way I can use the USB 6008 with my 6.1 RT version of LabVIEW ?  or should I send the thing back to NI ?
    I will appreciate your guidance on this issue.
    Thanks a lot,
    at

    Hi at -
    Allisso is right.  There is no way to use the USB-6008 with LV 6.1, because neither of its drivers (DAQmx and DAQmxBase) support that version of LV.  You'll have to either upgrade to a current version of LV or work with another device.  I recommend contacting your sales rep at NI for help.
    David Staab, CLA
    Staff Systems Engineer
    National Instruments

  • Can you use event case with labview real time?

    I have a real time application I am putting together and until recentally have concentrated on getting the data acquisition working as expected.
    I am using a PXI-8183 in a 1031 chassis.
    I am now trying to add the functionality for setting up the system in the form of a GUI remote front panel that I connect to with a host laptop.  I am connecting with the host as expected and it seems to be working well in that respect.
    My problem is with event cases, operating in a while loop on the target.  They just dont seem to want to trigger when i click on a button I have set an event for.
    I have looked through the documentation and cant see any reference to issues with event cases on rt, but I feel I am missing something fundamental.  Can anyone help?
    Regards,
    Barry

    look here maybe:
    http://digital.ni.com/public.nsf/allkb/42B70D2D0C4B568586256E2F0051441D
    Harold Timmis
    [email protected]
    Orlando,Fl
    *Kudos always welcome

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • Can i use Handle C with the LABVIEW FPGA module?

    Hi,
    Can i use Handle C with the LABVIEW FPGA module?  I am working with CompactRIO right now so, i want to know weather i can use Handle C with CompactRIO.Can i access FPGA in compactRIO independant of LABVIEW  means can i program it without using LABVIEW?
    regards,
    Vishnu.

    Hi Vishnu,
    Although we don't support Handel-C directly, it is possible to design your algorithms using 3rd party tools or system integrators and consume them from a top-level LabVIEW VI. The webcast at http://zone.ni.com/wv/app/doc/p/id/wv-268 shows an example of how you can use IP from C-based tools provided by Celoxica in the LabVIEW FPGA environment.

  • How can i use activeX Control in labview?

    how can i use activeX Control in labview?
    please describe me step by step.
    thanks.

    Well..that was quite helpful..but now I'm encountering certain problems. I've attached the VI I've made.
    I don't need sound at the moment so I dropped it. (Although I tried to play it..but all I could hear was a very annoying sound.) Secondly I don't want to display any date or time..so i dropped that property too.
    Now when I run this Vi...the webcam turns on, the screen of videocapx pops up..then the webcam light goes off..and another pop up appears saying..labview is not responding..and i have to close it reluctantly.
    I haven't placed the stop capture property in this vi. i checked it by placing it too..but that doesn't work.
    I would like to notify that my actual task is to acquire image and then compare it with another one already present on my pc. I want you to please help me out..solve my first query then I'll proceed with the latter part.
    Attachments:
    activexvideocaps.vi ‏20 KB

  • Can vector CANoe software can be used to integrate with NI XNET?

    Can vector CANoe software can be used to integrate with NI XNET hardware?, Is there drivers available for NI XNET PXI card to communicate and talk to Vector CANoe software?. Please help. This would help us reduce creating the Database using LAbVIEW.
    _Ventakesswaran

    CANoe is essentially made to integrate Vector hardware, so you can't directly use NI-XNET interfaces into your CANoe system. There are still a few ways to communication between LabVIEW (or CVI) and CANoe if you need to share data. It includes :
    - Using the ActiveX server of CANoe in LabVIEW. It allows LabVIEW to automate most tasks in CANoe and notably write/read data.
    - Writing a server/client code based on TCP or UDP to send and receive data. In LabVIEW, it just uses the primitives in the Data Communication palette. In CANoe, the communication can be handled by some code written in a CAPL node.
    The first way is slower, but does not require to write code in CANoe. There are also a few examples going around the web :
    - https://decibel.ni.com/content/docs/DOC-16844
    Regards
    --Eric
    Eric M. - Application Engineering Specialist
    Certified LabVIEW Architect
    Certified LabWindows™/CVI Developer

  • Can't use Daq Assistant in Labview 7.1

    hi! I have Labview 7.1 installed and an AT-MIO-16E-10 NI board. I can see the board in MAX\devices&Interfaces\traditional NI-DAQ but i can't run any tests(Test panels). I don't know if this is normal for this NI-DAQ model. anyway my main conceirn is that i can not use DAQ Assistant in LabView(when i double click on it or right click->Properties nothing happends). So i can't use my board in LabView. please help! thanks a lot

    You can use your board in LabVIEW but you can't use it with DAQmx. In the DAQ Quick Start Guide, the supported devices are listed and the AT E series is only supported with traditional DAQ.

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts?
    Hi there
    My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
    What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
    This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
    How do I do this please?
    I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
    So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
    Any advise please?
    Thanks

    You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
    The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
    It's not meant to be a multiple user/multiple ID device.

  • How can i use text expander with the new Mavericks,

    how can i use text expander with the new Mavericks,

    I regret upgrading to mavericks for the same reason
    ftamez wrote:
    how can i use text expander with the new Mavericks,
    Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

  • HT202213 can i use home sharing with my wife who has a different apple id

    Can I use home sharing with my wife who has a different apple id so we dont buy the same songs twice

    Wow, great question mhaney73.  There's got to be a way.  I have that problem as well, double songs all over the place. 

  • HT4363 Can I use home sharing with FaceTime?

    Can I use home sharing with FaceTime

    Winston,
    Thanks for the promt reply. But my problem was that I did not know how to use the air play. I looked around and figured it out.
    thanks,

  • Can I use my macbook with a mac mini

    can I use my macbook with a mac mini

    You mean can you network the two Macs?
    What OS X version are you running on both of your Macs?

Maybe you are looking for