Can I use "." in TCode

Hi,
If i try to create a TCode ZOTC_V.23 SAP gives me error
"Do not use special characters"
But SAP does have a TCode V.23. Does this mean we cannot create Z Transaction with "." in it?
Thanks for reading

Hi
Transaction Code
A combination of alphabetical and numerical characters forming a code for a business task.
in Z tcodes it don't allows us to insert special charaters in the T-code name
Reward if usefull

Similar Messages

Can I use Tcode to start a webdynpro for abap or for JAVA?

I noticed some page program can be started by tcode for administrion. I am not sure whether it is webdynpro or BSP. But can I use tcode to start webdynpro? How to do it?

Hi Yichao,
To Create a Transaction code for a Web Dynpro application, use Transaction SE93 (Transaction Maintenance).
1.       On the dialog screen, enter the transaction code (up to 20 characters) then click on Create button.
2.       A dialog pop up screen appears, enter meaningful description of the transaction in the Short Text field.
3.       Choose the option Transaction with parameters (Parameter transaction).
4.       Choose Continue. The Create Parameter Transaction screen appears.
5.       In the Transaction field, enter WDYID and select the checkbox Skip initial screen. There is no need to make changes in the Classification group box.
6.       Add the necessary entries to the Default Values table by using the F4 help. The values are automatically available after you enter WDYID in the Transaction field.
Try going through this link for a better picture about how to achieve this.
saptechnical . com / Tutorials / WebDynproABAP / TransactionCode / Create.htm
You would have to remove the unnecessary spaces in the URL before you can see the actual working one. It wasn't allowing me to paste that link in here so had to do it this way...
Regards,
Uday

What r the diff. error that can be solved using RSRV tcode?

Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
[email protected]
Thanx in advance,
ravi.

Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik

Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?

Hi All,
Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?
In documentation of the User Exit I can see that I can use this user Exit for IW37(Program - RIAFVC20) , but I want to use this for IW37N (RIH_ORDER_OPERATION_LIST).
Please tell me is it possible.
With best regards,
Narendra

Hi Pete Sir,
I am on 4.7 , how to work with it. I am going to use screen exit IW0110018 and I want to add User fields in the IW37N.
Thanks with best regards,
Narendra

Can any body tell me how to use the TCODE:ABF1 ?

Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me the different of the ABF1 and FB01?
Thank very much.

Hi Jie,
both Transaction codes are working are same.
Both are working through program : SAPMF05A.
Packages are different: FIDC & AB.
FB01 : we can control objects through F_BKPF_BUK
Hope its clear.
Kishore K

Use of tcode file

what is the use of tcode file????
what is platform independent file name????

Platform Independent File path: The actual (Physical) file name/path is always dependent on hardware and OS of the system. Now In this transaction define a Logical name of a file and map it to your specific system specific actual path.
Now in your coding you can use the logical name. When you use the same come in a different system you need not change the logical name to everywhere you have coded. The Logical name will be same, only in FILE transaction you will change the mapping of Logical File name to actual file path.
Check the following Link :
http://help.sap.com/saphelp_erp2005/helpdata/EN/8d/3e4edc462a11d189000000e8323d3a/frameset.htm
Example:
Suppose in your application server you created a file and give a logical name as AIRS_PATH. But when you want to access the file you need to know the actual physical path to it. That path may be c:\temp\<FILENAME>. Now in FILE transaction you mapped AIRS_PATH to c:\temp\<FILENAME>.
So whenever you try to access AIRS_PATH, the system know that you want to access the c:\temp\<FILENAME>.
Now may be you want to run your code in a different system and different hardwre. And the file is stored there in c:\temp\temp1\<FILENAME> path. So then in that system you need to map AIRS_PATH with c:\temp\temp1\<FILENAME.
Now while coding you are not actually familiar or bother the actual file path. You will do your coding based on AIRS_PATH. And that is same in all the system only the mapping need to change. Thus you can achieve the system independence.

How can I use this RFC function

I just wanna create a monitor as same as TCODE ST06
so
I Added a TextBox, a Button and a DataGrid. and then everything has finished.as same as following step for "RFC_CUSTOMER_GET" from SAP connector 2.0 help
but how can I use the function? (VB.net 2003) I debugged the function in SE37 the function only need 1 parameters
so,I scratched some statments... but it is still not correct
        Dim num1 As Integer
        Dim dst As CPUSAPUSAGE.CPU_SINGLETable
        Me.SapProxy11.Get_Cpu_Single("local", "", num1, num1, num1, num1, "", num1, num1, num1, num1, dst)
please tell me details steps
Thank in advance.
Yi
Create a Windows Forms application.
Add an empty SAP Connection class with the ABAP functions
RFC_CUSTOMER_GET and RFC_CUSTOMER_UPDATE.
Leave the proxy designer open. Go to the SAP Proxy toolbox and drag the Proxy field icon to the designer.
Rename the new Field1 to Tab. Change the Type property to BRFCKNA1Table. To do this, use the drop down icon.
Note that the ReadOnly property automatically changes to true and the default value changes to new BRFCKNA1Table().
Add a second Proxy Field with the name Filter, the type String and the default value A*.
Select the Rfc_Customer_Get function and click on the button of the Parameters property.
Set the default values of the three parameters with the drop-down icon as follows:
Name1: Filter
Kunnr: Customer_T: _Tab
Save the proxy designer and switch to your Windows form. Add a TextBox, a Button and a DataGrid.
Add an instance of your SAP proxy to your Windows form, add a Destination and set the Connection property as described in A4.
Set the DataSource property of the datagrid to sapProxy11. Set the DataMember property of the datagrid to Tab. Alternatively you can set the DataSource to sapProxy11.Tab and leave the DataMember empty.
For textBox1 use the DataBinding feature to bind the Text property of the textbox to sapProxy11.Filter.
Double-click the button to create an event handler and add a single line:
this.sapProxy11.Rfc_Customer_Get_();
You are using sapProxy11 as a smart DataSet that contains the necessary state. You bind the state to the corresponding controls. The overload method Rfc_Customer_Get_() does not have any parameters, as the required state is already in the bound Proxy Fields.

Dim dst As New CPUSAPUSAGE.CPU_SINGLETable

What is the use of tcode lbwq

Hi all,
can u please explain me the use of tcode lbwq in lo-cockpit extractions.
Thanks in advance.......

Dear Rakesh,
Whenever you are working with LO extraction , and if your Update Mode for Delta is Queued Delta,then all the records that are being changed or created for a particular Application for a successful initialization ,sits in a Queue ( Extraction Queue or Outbound Queue ) in the form of LUW's . These needs to be transferred to the Delta Queue , as the Delta is always accepted by BW only if it passes through the Delta Queue ( RSA7) , for this we schedule a Backgrd job ,which we call as V3 Collective Update Run ,which transfers the records ( LUW's per Datasource ) from Outbound Queue to the Delta Queue .
Hope it helps.
Thanks,
Krish
*Assigning points is way of saying thanks in SDN

What is the use of TCode: OOSE

Hi,
Can i know what is the use of TCode: OOSE
Where i can see a list of entries, let me know what is the use of these option.
When we would be using it.
Regards
Rajesh

Hi Rafiqh,
Thanks for your quick response.
What do you mean by switch, if you can provide me with some example it would be gr8.
Appreciate your early response.
Regards
Rajesh

What is the use of Tcode: SM35

Hi Experts,
What is the use of Tcode: SM35
If some one can brief me in detail it would be great help.
Appreciate your early response.
Regards
Rajesh

Hi Rajesh,
SM35 is used to run Batch input sessions.
These sessions can be created via LSMW or any batch-input ABAP program.
To run a session, select the session and press "Process".
You can either process foreground (as if you are entering the data), display errors only (runs in background as far as there is no error), background (you need to check the errors when the session is over).
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Dec 16, 2009 4:19 PM

What is the use of Tcode : FBE1 ?

Hi,
What is the use of Tcode : FBE1 ? with example please.
Regards.

Hi,
FBE1 is used for creating payment advices. You can create payment advices for both vendor and customer. Generally this information you will receive from customers, based on that you can create payment advices. Once payment advices are created, you can use these payment advices when the actual payment information comes from bank statement. By the help of payment advices you can identify the open items based on that you can clear the items.
Hope u understood.
Regards
Srikanth

What is the use of tcode mb1c

hi
what is the use of tcode mb1c
pls reply
thanks in advance

Hi Ashok,
The transaction MB1C is used to add the no. of stock to a material.In MIGO transaction you can post all or some of these stock of the material.

Use of Tcode : GS01

hi experts,
I'm trying tcode : GS01, as far as i know it is used for hardcoding stuffs which is further used in programming.
I want to know its steps to be used in my select queries.
Thanks and regards,
Gaurav

Not hardcoding, more like softcoding as in configurable value lists... GS01 is used to create "sets" - GS02 allows you to change them, and GS03 allows you to display them.
A set is a grouping of values e.g. you could define a set of tax codes, or a set of cost centres, or a set of GL accounts. You can then use this grouping for {for exampe} a validation in FI, or for building a select-options range to apply to a database lookup.
As for reading the data, the function modules in SAP used to read set contents will return the values to you... have a search through SDN for examples of G_SET_ENCRYPT_SETID, G_SET_GET_ALL_VALUES etc
Jonathan

USE of Tcode SHD0

Hi expert .
i am working on Tcode SHD0 . i m stuking on screen varient . and transaction varient . so let me know how could i use this tcode in a proper way .
Thanks
chandra shekhar singh

Dear,
Follow step by step process for SHDO:
Go to transaction SHD0.
Enter the transaction code MM01. Now click on button CREATE.
Following information message would appear:
Click Enter to proceed.
Now the MM01 transaction would appear.
Select the required Industry sector and Material Type and press ENTER. Following popup would appear:
Now make the modifications as shown below:
Click on u201CExit and Saveu201D.
Following popup would appear:
Click Enter to proceed. Following screen would appear:
Save your entries and go back to the main screen.
Now enter the transaction variant name and click on Change button as shown below:
Now click on Insert Row.
Enter the name of the screen variant created earlier or use F4 help to select the value:
Now click on Goto à Create Variant Transaction
Enter the values as shown above. Click on Enter. The following SE93 transaction would appear:
The name of the Transaction Variant is automatically proposed. Save your entries.
Now go to Transaction ZMM01 and check your transaction variant:
You can observe that the field Industry sector and Material type default to the value we have given earlier and are output enabled only.
This i have copied from my Documents in which i have screen shots for the images also...Unfortunately it did not copied above.
But still if you follow above instructions, it will work.
Regards
Utsav

Use of Tcode: UPX_MNTN and UPX_MNTN1

Hi,
Can anybody give me idea what is the use of Tcodes: UPX_MNTN and UPX_MNTN1.
It would be great help for me.
will assign the points.
thanks
BPS

Hi consult following as well:
Layout missing in UPX_MNTN
Also check the following threads for more information on how to use this transaction:
SEM-BPS enhancement layout
Enhanced Planning Layouts in BW-BPS possible?!?
regards
D

Use of Tcode : FRFT_TR

Hi,
What is the Use of Tcode : FRFT_TR
For what purpose, it can be use...
Regards,...

Hi Anil
This T.Code normally we are using it in Treasury management (Bank accounting)
FRFT_TR u2013 Payments to Business Partner Payment with Repetitive Code
By using this code outgoing payments possible.
Rds,
Anil

Can I use "." in TCode

Similar Messages

Maybe you are looking for