Can I use InDesign Ver 3.0 and the PM plug in pack with Vista?

I am a long time Pagemaker user and am still using PM6.5 I needed a new computer and of course, it is the Vista OS. I have an original version of InDesign CS (Ver 3.0) with the Pagemaker plug in pack. I never learned to use it cause I was so used to 6.5. Anyway, I installed the InDesign on my new Vista computer but it won't install the PageMaker plug in pack. Says that the OS doesn't support the installation. Can anybody tell me if there is a fix for this or how I can get this to work. InDesign seems to hard and I have thousands of old PM6.5 files I need to use. Thanks!

OK well im using vista 64 bit ...and everything the so called community experts say means i should not be able to install this Adobe indesigne CS Page Maker edition....and its Page maker Plug-In pack
But I did with little complication.
..... installed the Adobe indesigne CS
.....it says you must install the Page maker Plug-In pack
.....so i started the plugin cd said this operating system is not supported
"work around below"
so i did explore cd and went into the Adobe Page maker Plug-In pack Directory on the CD
and i right Click Setup
Select properties
now select second tab at tob COMPATIBILITY
check run this program in compatibility mode for:
then make sure drop down says Windows XP SP2
then hit ok
then and i right Click Setup And select run as adminstrator
hit allow if it prompts you and go thru the normal setup like you would with XP had no issues here works great........
Hope this helps : )
ps doing same for most xp programs makes them run like they are in XP

Similar Messages

Can I use InDesign cs6 to open and work with PM6.5 files?

Can I use InDesign cs6 to open and work with PM6.5 files?

Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager. After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image. Even vectored art. Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
It may be that any cropping gets lost, too? I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days!

Can I use my current CS6 Photoshop and After Effects plug-ins if I join the Creative Cloud?

I am interested in getting a Creative Cloud membership but am wondering if I will still have access to all of my CS6 plug-ins for Photoshop and After Effects?

you can still use your cs6 versions along side the cc versions.

How can I use an IF ELSE statement and the xdoxslt: get_variable together?

First of all, I'm a big fan of this forum and I just want to thank the community for helping make the BI Publisher world a better place.
I'm trying to populate a table with a years worth of data with the column=PRODUCT and row=month of DATE. Here's the catch, not all of the months will have data. So here's where my problem is, I'm not able to use an IF ELSE statement along with a XDOXSLT:GET_VARIABLE expression so that if there's no data for that month the default value will be 0.
Can someone help me find a solution to either one of the attempts below or a completely new method? Thanks!
BP4 = numeric month value using DATE (more code to pull only month from DATE not included here)
JAN1 = PRICE if data exists, else 0
1) I tried this and it didn't work:
<?if: xdoxslt:get_variable($_XDOCTX,'BP4'),01 then xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE) else xdoxslt:set_variable($_XDOCTX, 'JAN1',0) end if?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
2) I tried this and it didn't work:
<?xdoxslt:ifelse(xdoxslt:get_variable($_XDOCTX,'BP4')='01',xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE),xdoxslt:set_variable($_XDOCTX, 'JAN1',0))?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
3) I tried this and it didn't work:
<?xdofx:if xdoxslt:get_variable($_XDOCTX,'BP4')='01' then xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE) else xdoxslt:set_variable($_XDOCTX, 'JAN1',0) end if?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
sample XML:
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-01-01T00:00:00.000+08:00</DATE>
<PRICE>31</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
-DrT
Edited by: 990965 on Feb 28, 2013 8:27 AM

let me clarify my logic, the template 1) searches for the relevant PRODUCT (in the case below, it searches for BPD which is the column in the table) 2) searches for the relevant month in DATE (which is the row in the table) 3) if data exists, get PRICE else default to 0
Variable definitions:
BP4 = numeric month value from DATE (more code to get this value not included here, but it works...)
JAN1 = set to PRICE if data exists for that month, else 0
the query is only pulling all of the existing data, so if there's no data for March then there wouldn't be a March entry in the xml. In the sample xml below, we only have data for the first two months (Jan, Feb) so that's the only data in the xml. I can't check if PRICE is null because the xml will not have any data for March.
I've read through other threads and it seems that BI Publisher can't use an IF THEN ELSE with the XDOXSLT:GET_VARIABLE. I sent the template and xml to you.
Sample XML:
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-01-01T00:00:00.000+08:00</DATE>
<PRICE>31</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-02-01T00:00:00.000+08:00</DATE>
<PRICE>30</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
Edited by: 990965 on Feb 28, 2013 8:30 AM

Can I use Magic Mouse, Track Pad and the wireless keyboard together?

Can I use a Magic Mouse, a Track Pad, and the wireless keyboard together at once?
Thanks.

All through bluetooth?

After upgrading to Snow Leopard I can't use software update or firefox, and the internet is slow

I'm getting big problems. After installing Mac OS X Leopard from my usb, I had to since my disk drive stopped working, I had the following problems. 1) Firefox stopped working. 2) Software Update stopped working 3) Chrome runs really slow. 4) Safari stopped working 5) Even on Chrome I can't access any email, including; gmail; hotmail; yahoo; etc...
When software update loads it says checking... but it stays at 10% for at least 1 hr. I reinstalled SL once and it did something different, suddenly my wifi stopped working, and rapidly fluxtuated.
What the heck is going on?

Yes LS needs a update to work with the changes in 10.6.8, so does Parallels.
Read my backup, bootable clones, troubleshooting, performance, wifi security and restore info/advice here
https://discussions.apple.com/message/16276201#16276201

My computer crashed and I had no back up. How can I retrieve my purchased songs? I can view my history of purchased songs and the list appears in itunes with ! next to them. Can you please reset this so I can re-download my purchased music.

My name is Janet Haynes. I have a PC and it crashed. I now have a new PC and have installed itunes. My music list appears with ! by them. How do I get my purchased music back. I have done all the online support and nothing has worked. I made an appointment with the Genius Bar at the Apple store and they told me to go this route. Please reset my itunes an allow me to re-download my music. I do not have a tremendous amount of songs, but do not want to have to purchase them again. Please, Please help me. I thank you in advance
Janet Haynes
[email protected] or [email protected]
(225) 278-0431

It is probably not wise to leave your e-mail and phone number on a public forum.
It has always been very basic to always maintain a backup copy of your computer. Use your backup copy to put everything back.
You purchase one download only.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod: File>Transfer Purchases

I can't use indesign since upgrade, it keeps asking me to upgrade java which I have done and still wont open please help me i have a deadline

i can't use indesign since upgrade, it keeps asking me to upgrade java which I have done and still wont open please help me i have a deadline

DL the SE 6 JRE from http://support.apple.com/kb/DL1572.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I can't use InDesign CC 2014, I tried to uninstall and now I'm not able to install again. It says there's a missing file. What shall I do? Shall can I cancel Creative and install it again? And how?

I can't use InDesign CC 2014, I tried to uninstall and now I'm not able to install again. It says there's a missing file. What shall I do? Shall can I cancel Creative and install it again? And how?@@

http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Can I use indesign without being online

can I use indesign without being online.

Creative Cloud aplications are installed on and run from your computer. You must have an internet connection to activate, and CC will "phone home" periodically to verify that your subscription is valid, but otherwise no network connecton is required. If CC is unable to make a connection to verify subscription status you should still have 30 days grace period to work.
As far as the file being too large, I'm not a Publisher user so I don't know haow it handles images, but the correct method in InDesign would be to Place the images which creates a link to the original of only a few bytes in the file, and it would not be unusual to have a document with hundreds of pages and hundreds of linked photos.

Can you replace existing images in Captivate 7 the way you can when using InDesign?

Can you replace existing images in Captivate 7 the way you can when using InDesign? I need to replace some images but wondering if I'll need to reformat, resize, rename for the Advanced Action, etc.

The work flow is a bit more complicated than in InDesign (keeps only a link to the image as you know in the frame). I understand the problem with the advanced/shared action references. This is my work flow, maybe someone else has an easier, shorter one:
Right-click on the image and use 'Find in Library' or use CTRL-ALT-F if it works on your keyboard (doesn't on my AZERTY one)
In the Library use the right-click menu to open the Properties or double-click the name of the image
In that dialog box, choose 'Import' and choose your new image; for some reason you cannot choose from the Library however, which I find really sad because I'm used to import all assets to the Library.
Drawback: if the new image has not the same width/height ratio, it will adapt to the original size of the image, you can use Edit image to repair. You'll keep the name of the image, you don't have to change advanced/shared actions.

How can I use microsoft word, power point and those apps in my new iMac ? i bought this iMac yesterday so am new on tho and i would like to know

how can I use microsoft word, power point and those apps in my new iMac ? i bought this iMac yesterday so am new on tho and i would like to know

If you absolutely must have the Microsoft applications, you can purchase and download them from http://microsoft.com/mac.
Free software suites LibreOffice and OpenOffice offer similar functionality (word processing and spreadsheets).
Or you could do worse than look at Apple's Pages, Numbers and Keynote, which should already be installed in your Mac and can export to Microsoft formats if need be.
Matt

Can I use an iPad, iPad mini and iPod touch on the same apple account?

Can I use an iPad, iPad Mini and iPod touch on the same account? Is there a limit to how many devices I can use?

When you turn on your iDevice for the first time just sign in with the same Apple ID and you can download any apps you have purchased in the past! There shouldn't be a limit to how many devices you can use.

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Can i use home sharing if me and my wife have different apple ID accounts?

can i use home sharing if me and my wife have different apple ID accounts?

Yes.
You need to sign into home sharing using ONE Apple ID. So either pick yours or hers, use the same one for home sharing on the computers. Once they are signed in on both Macs you can access media that the other user purchased.
Click the 'Shared House' for her library (if you have the sidebar enabled) when you are in your iTunes to access her media & vice versa, both iTunes needs to be running & awake.

Can I use InDesign Ver 3.0 and the PM plug in pack with Vista?

Similar Messages

Maybe you are looking for