Can I use instrument driver in a software application

Hi,
I'd like to develop a generic driver to control any instrument from a software application . Can I use the LabWindows/CVI wizard to succeed ?
Once I have created my dll, does it mean something to call IVI function from a sofware application ? (for example : in a Visual C++ application, can I call Prefix_init and after Prefix_WriteInstrData if I have connected an Instrument with an input ?).
Thanks

Hi,
Using the IVI class driver in your application you can at least use the same program to communicate with instruments belonging to the same class.
To acomplish this you need the specific driver for the instrument. The class driver provides a standard API you can use in your application. The class driver in turn calls the specific instrument driver that you have configured.
If you call WriteInstrData you still need to determine the command string you need to send to the instrument. The IVI driver wraps the instrument I/O, using the attribute model or high level functions.
DiegoF.
National Instruments.

Similar Messages

Can I use Linux Lubuntu 14.10 software

Can I use Linux Lubuntu 14.10 software.On my HP ALL -IN -ONE HP DESKJET F2200 All In One, series

Hello @BigLDavid,
Welcome to the HP forums.
I understand that you are running a Linux operating system, and would like to use your Deskjet F2200 with it.
I would like to help.
It is hard to give a yes or no answer with an open source operating system.
If your OS has the HPLIP software installed, you should be able to use that printer.
Chances are your version of Linux already has the HPLIP software installed.
If it does not please use the following link.
HP Linux Imaging and Printing
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HT1338 can i use pen drive on Macbook air ?

can i use pen drive on Macbook air

You can if your cellular plan allows it. Not sure how much data you mean by "quite a bit" but be aware that doing this can use up a lot of data in a hurry depending on what it is you do. The following has information on how to share your cellular iPhone data: iOS: Understanding Personal Hotspot - Apple Support

I have macbook pro w existing iPhoto library. Now have Canon printer and loaded Canon software for same. Cannot access iPhoto library from Canon software, but prints fine from iPhoto. How can I use iPhoto library w Canon software?

I have a macbook pro w exisitng iPhoto library. I now have Canon printer and loaded Canon software for same. I cannot access iPhoto library for use from Canon software. I can print from iPhoto directly to new printer without problem. How can I use iPhoto library with Canon software? I would like to try the software to see which I prefer...

Simply export some photos from iPhoto to a folder on the desktop and experiment.
Without telling us even what this program is, not to mind what it does, that's the best anyone can suggest.
Regards
TD

I am using Windows Vista running ver 9 of Internet Explorer. Can I use iCloud drive with my PC?

I am running Windows Vista Business on my PC. I have ver 9 of Internet Explorer. Can I use iCloud drive on my machine?

Has any one helped you?

Can I use iCloud Drive online only?

Can I use iCloud Drive online only? I don't want to store everything on my macbook pro. I only have 128 GB SSD and I don't want to fill it up with photos, music, etc. I still want to see everything in finder in the iCloud Drive folder, but I don't want it to be saved on my macbook.

Yes I know, but I want it to be used as external storage, not something where I store copies of stuff that I have already on my macbook
But iCloud Drive is not an external storage. It is a common storage that is synced and shared between all connected devices, and it is always available, even when you are not connected to the internet.
What you want to do is not possible with iCloud Drive.

Can we use external drive with ipad air

can we use external drive with ipad air?

There are some wifi-enabled drives that allow you to stream content (music, films, tv programmes) to an iPad, but you can't directly connect one to an iPad.

[pavilion g7-2116sr] How can I use amd driver with only integrated graphic?

Radeon hd 7670m is disabled coz it's broken. Amd driver don't work. Windows use vgasave driver. How can i use amd driver with radeon hd7660g?
P.S. Sorry, my english isn't good(

Hi @Leys
I see you are stilll unsuccessful installing the drivers as you get the blue screen.
Here is a link to Computer Does not Start (Windows 7, Vista, XP) that may help.
Here is a link to Testing for Hardware Failures (Windows 7, Vista) to determine if your graphic card is defective.
If the graphic card fails, here is a link to the HP Pavilion g7 Notebook PC Maintenance and Service Guide. Please note page 9 or chapter 1 page 9 for a list of recommended replacement graphic cards.
If the graphic card passes you may wish to consider doing a restore back to a known good time or a full recovery back to factory.
Using Microsoft System Restore (Windows 7)
Performing an HP system recovery (Windows 7)
During the recovery process there is an option to backup your personal files to prevent data loss. If you have not done one yet I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
At any time you may wish to contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Can i use my iphone 4, with software ios 6.0.1

Can I use my iphone 4, with software ios 6.0.1

And what for? I mean, of course you could stick it put it into your underwear and let it vibrate all day. That sure can be fun for a while... if you have more specific things in mind, perhaps you care to enlighten us....
Mylenium

Storage spaces can only use whole drives

One of the features that I was really interested in with WS2012E is storage spaces as it replaces the old driver extender of WHS v1. Having now installed WS2012E onto my WHS2011 box I am bit staggered to find that it can only use whole drives. My box came
with 2 * 2Tb drives, the first partitioned as boot, then a 60G of OS followed by the rest allocated as storage. I have successfully created a Storage space pool of the second drive but cannot find any way to add the remaining storage from the large partition
on the other drive into the pool. As the UI just shows me drives rather than partitions, I am bit challenged. I thought that storage spaces was meant to be flexible about adding drives just like the old drive extender. Even add on technolgies like DriveBender
for WHS2011 allows for a storage space to be made up from this type of set up. So we seem to be going backwards.
Plus when creating the drive pool it defaulted on a 2Tb drive to a 2Gb size! How useful is that? As soon as I started copying data to the drive it ran out of space. I then had to go in and expand it.

I note that you did this with Windows Server 2012 Essentials. I cannot seem to do this with Windows 2012 Standard. I have two 500 GB disks and 40GB of the first disk, PhysicalDisk0 is partitioned for the OS. Nothing I do makes PhysicalDisk0
show up in the Storage Pool area of Server Manager - all I can see is PhysicalDisk1. (Refer to 'Physical Disks' in the bottom right corner of the previous poster's first screen shot above. I can only see 'PhysicalDisk1', not 'PhysicalDisk0'.) If
I click 'Disks' just under 'Volumes' in the same screenshot above, I can see PhysicalDisk0, and it shows 466 GB capacity, 423 GB unallocated. PhysicalDisk1 shows 466 GB capacity, 466 GB unallocated. My intent was to mirror the remaining 423 GB
on PhysicalDisk0 with 423 GB on PhysicalDisk1. I would then allocate the leftover 43 GB on PhysicalDisk1 as a 'scratch' disk. I have tried leaving everything unallocated and have tried all variations of creating volumes and virtual disks, but nothing
I do makes a difference. I found other threads related to this issue which indicated there was a flaw in the 2012 GUI and that this process could be done via Powershell. However, there seems to be a mix of Windows 8 and Windows 2012 in these threads
and, apparently the Powershell commands I've found apply to 8 and not 2012, as I get invalid command errors when I try to use them.
Can anybody tell me how to mirror the unallocated portion of the primary disk PhysicalDisk0 (which has a partition for the OS) with a same-sized portion of PhysicalDisk1 with Windows Server 2012? Thanks!

Can i use external drive with pc and mac??? files be recognised by both??

hi
i have two external hard drives, with stuff from my pc on them.
can i plug them into my macbook? and just copy files?
usb hard drives.
one i think is one or the other, mac or pc, not both at same time, unless i partition and format i think. maybe the other one too.
i have a 8gb file on my pc, im trying to get into my macbook.
how can i???
i have a 160gb ipod, its only 30gb full, and pc says not enough space on it.
why is this???? the file is only 8gb......and theres over 100gb free on my ipod.
anyone help?
cheers

If your iPod is formatted FAT32 there is a 4 GB file size limit. Obviously an 8 GB file exceeds the limit.
In order to use any drive on both a Mac and a PC with full read/write capability the drive must be formatted MS-DOS (FAT16 or FAT32.) A drive formatted NTFS is read-only on a Mac unless you use third-party software such as MacFuse with NTFS-3G or Paragon NTFS.

How can i use adobe drive/cs4 for storing images and interact this with adobe cq5.4 DAM...

Hi,
Can anybody suggest me i want use adobe drive to store images and i want to access the images for my cq5.4 instance..
I want to integrate drive to the cq5.4 dam for ignoring the dam burden on cq5 instane repository..
Is it possible to use this drive? or is there any other way i can achieve my task?
Thanks,
Sony C.

Adobe Drive software doesn't store images; it enables integration of a DAM system with Creative Suite and now Creative Cloud desktop apps.
Adobe Drive 3 is the first version of the software to support integration with Adobe's DAM. This version was designed to work with CS5 and CS5.5 apps.
We do not have a version of Drive that supports integration with CQ 5.4 DAM and CS4 apps.

TM backup: can I use two drives to back up data on two other drives?

Hi to all!
I have with me a 1 TB/ Thunderbolt EHD [external hard drive], a Lacie 2 TB/FW, EHD, a Seagate 2 TB/ 2 USB, EHD, a Seagate 3 TB/ 2 USB, EHD and [to be purchased] a Seagate 2 TB/ 2 USB, EHD.
I mainly use my Mac for making HD videos using FCPX.
I am planning to use these drives in the following manner as indicated by the table below:
Drive:
a
1 TB,
Thunderbolt,
Buffalo
b
2 TB/ FW
LaCie
c
2 TB/ 2 usb
Seagate
d
3 TB/ 2 usb
Seagate
e
2 TB/ 2 usb
Seagate backup
[to be purchased]
f
500 GB, internal
Macintosh HD
Partitions
1
1
1
2
1
USAGE:
editing videos, one
active project at a time
mainly for camera
archives, music files,
FCP events, projects
and exported movies
same as the LaCie,
as a backup of data
intend to have 2
partitions of 1.5 TB each;
one partition for personal
data and the other partition
to back up data on the
Thunderbolt [current project]
intend to use this for
TM back up of my
Mac's internal HD
applications, documents etc.
backed up by:
one partition of 'd'
by the 2 TB Seagate
backup 'e'
I would like to know whether I could do these things:
Can I use the TM backup feature in this manner of using 2 separate drive/partition [e/d] to back up data on 2 other drives [f and a]?
Further, I am manually copying files from 'b' drive to 'c' drive; without incurring further expense, can I ensure that whatever I write onto the LaCie [b] gets copied to the 'c' drive automatically?
Any thoughts, suggestions and instructions in these matters are welcome.

EXT. DRIVES:
a
1 TB
Thunderbolt
b
2 TB/FW
[LaCie]
c
2 TB/ USB
[Seagate]
d
3 TB/USB
[Seagate]
e
2 TB/USB
[Seagate]
USAGE:
scratch disk
[planning to have
only one active
project at a time]
camera footage
FCPX events, projects
and completed movies
Same as the LaCie,
as it's backup
To be used as TM
backup for my Mac's
internal and also to
the scratch disk.
Planning to have it in
2 partitions: to have
a 'secondary' copy of
my Mac's IHD on one
partition and to have
personal 'net retrievable'
data on the other partition.
'MY
OBSERVATIONS'
my projects are usually
less than 10 minutes
and hence I trust that
work would be fast and in
case of drive failure, I
would be losing only
one project.
I am importing camera footage
primarily into this drive and
being FW, data transfer is
fast.
Am manually copying
files from the LaCie
onto this.
This drive is not a
brand new one, but
has been given to me
by the company's
agent as a replacement
to my earlier 2 TB drive
which had failed.Hope
this also will not fail!
Because of the 'uncertain'
performance of the
3 TB Seagate, I intend
to have a copy of my
Mac's IHD in one
partition. I intend to place only
such data upon the other
partition that I will not be
greatly affected should the
drive fail.
If you can analyse this plan and give your insight upon this matter, I will be immensely happy.
Further, if this proposed use of the 3 TB Seagate is okay with you, I need to know how to remove the Thunderbolt from doing it's temporary role of TM backup and how to coronate the 3TB Seagate as its successor.
FYI, I would be switching off TM from functioning whenever I am editing video; I would be switching it on only after a full editing session.
Another question on my mind is this: do I need to partition the drive 'e' at all?
Message was edited by: somanna

Can I use flash drive in Windows that install on Oracle VM Server

Dear everyone,
I install Windows server 2003 on Oracle VM Server x86. I can use .iso file by copy iso file to /OVS/iso_pools and add resource. But I want to use flash drive on Windows server 2003 that installed on Oracle VM. I don't know how to do or it can do. I want to plug flash drive in Oracle VM Server and can use it on Windows server 2003
Thank you so much for advance
Fujimaru

It looks like you will not be able to use it without continually stopping and starting the guest and editing the vm.cfg file to add the physical device once it is mounted on the DOm0

Can i use pen drive to install boot camp on my mac?

Can i use usb pen drive to install boot camp on my mac?

No. Windows cannot boot from nor be installed on an external drive. That said, in the Windows world there are ways to put a bootable Windows installer on a flash drive. But you will have to find those on your own.

Can I use instrument driver in a software applicatio​n

Similar Messages

Maybe you are looking for

Can I use instrument driver in a software application