Can i use Internal DHCP on WLC Guest Anchor (5508) with Foreign HA 5508

DHCP Proxy is required in order to use local WLC DHCP Pool (Guest Anchor), however reading Wireless Q&A (http://www.cisco.com/image/gif/paws/107458/wga-faq.pdf) states that both foreign and guest anchors must have :
In a Wireless guest access setup, the DHCP proxy setting in the Guest Anchor controllers
and the internal controller must match. Else, DHCP request from clients are dropped and you
see this error message on the internal controller......
However if you have N+1 you cannot use internal DHCP, does this also "grey" out the DHCP Proxy global setting? If so will the Guest Anchor still work with a internal DHCP pool even though foreign and guest controllers have a mismatch in DHCP Proxy (global) setting?
Many Thanks
Kam

Well it should still work... dhcp proxy is required on the WLC that has a dhcp scope. With the newer code versions, you can enable dhcp proxy on a per interface do this doens't have to be global.

Similar Messages

Using internal DHCP in WLC 4112

Hi Guys,
I want to make my wireless place into different network. So i define the 3 internal dhcp scope inside WLC. My WLC LWAPP set to layer 2. My problem is, the clients are not able to get the IP address into WLC dhcp scope. Please help me what to do
thanks,
Jong

hi jong,
as far as I know the WLC isn't a router but I think you have a router somethere in your network(layer3 switch for example) where you need a virtual interface for each VLAN and the ip of this interface is your default-router for the corresponding clients.All ports of the WLC are Trunkports but you can also use one as an access port for an specified vlan. I would recommend to configure the controller as follows,
ap-manager and management interface same vlan but different ip addresses, dynamic interfaces for each WLAN with different vlan ID's, map all interfaces to a physical port of the WLC, make sure the switch where the WLC is connected is configured as trunk with the needed VLAN's, make sure you have each VLAN also configured in your network infrastructure,
hope this will help you.
regards,
Rocco

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

Can I use Adobe photoshop CC classroom in a book with Photoshop CS6?

Can I use Photoshop CC classroom in a book lessons with Photoshop CS6?

Yes, there will be some new features in CC that CS6 does not have, but 97% will be the same.

Can I use the ipod classic as an external hardrive with time machine as well as an ipod for my mac book pro OS X?

Can I use the ipod classic as an external hardrive with time machine as well as an ipod for my mac book pro OS X?

No. Time Machine has been specifically written not to back up to an iPod.
(58364)

II downloaded the OS X version 10.9 and my iPhoto version 9.2.3 will n.ot open. I get a message that I can't use this version of the application I photo with this version of OSX. What do I do now and how do I get the photos out of the old version?

I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open. I get a message that I can't use this version of the application I photo with this version of OS X. How do I upgrade to a i photo that will run on 10.9. Do I purchase a new program or can I do just an download?

Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.

Can I use ASUS VM60-G072R Desktop (like mini Mac) with my iMac all in one computer? I need to use Windows version of QB and I don't want to buy a PC tower or laptop.

I need to use the Windows version of Quickbooks Pro and I don't want to use Parallel or buy a PC tower or laptop. Can I use ASUS VM60-G072R Desktop (like Apple Mini) with my iMac all-in-one computer?

Thank you Kappy. I guess I have to decide to purchase a separate monitor and keyboard for this mini PC computer then. And also find extra space in my office. I'm happy you answered my question so quickly.

Can I use a power cord from a Macbook air with a Macbook?

Can I use a power cord from a Macbook air with a Macbook?

No, the MacBook Air power adapter is a 45 watt. A MacBook needs at least a 60 watt power adapter although you can use a MacBook Pro 85 watt adapter. You can use a higher wattage adapter without any problems.
http://support.apple.com/kb/HT2346

What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?

What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?
I writed to Panasonic Italy support about this question:
"What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?"
Panasonic writed me in a very poor manner and said me:
"...riproduce formati: AVCHD (anche 3D), SD-Video, DivXHD, JPEG, MP3, AAC tramite USB e Slot SD/SDHC/SDXC card..."
"...formato : AVCHD estensione file nella SD: .MTS..."
I made a few videos edited with PremiereProCS5 and exported as H.264 Coding and .mp4 file extension, all side by side, with layout 1920x1080pixels that includes two stretched frames at 960x1080 pixels.
This is the same image layout that uses the Panasonic 3D consumer camcorder "HDC-SDT750", that record AVCHD videos with file extension .MTS.
I also tried to export another video as MPEG2 with .mpg file extension.
But at the store the tests failed, and I cannot see anything!
My questions are:
1) What format can be used by PremiereProCS5 for exporting the Stereoscopic 3D videoclip and play them via USB port on Panasonic TVPlasma3D such "TX-P46VT20"?
2) What codec should be used? H.264? H.264-bluray?
3) What file extension should have the movie file? .mp4?
Many Thanks!
Horsepower0171.

-I already read entirely those threads, but nothing about stereoscopic 3D AVCHD movies through USB port, on Panasonic TVPlasma3D.
(Also, Sony said me that is not possible to play 3D videos on your 3DTV through USB port).
I tried to made a H.264 videoclip, with .MP4 extension, at 960x1080p side-by-side layout, but nothing was displayed, and black screen.
I think that just the AVCHD movies, with .MTS extension, that comes from Panasonic consumer camcorder "HDC-SDT750", can play the 3D videos via HDMI cable, not USB port.
But not the exported videos from PremierePro via USB port.
I seen this tutorial from David K Helmly:
http://www.youtube.com/user/dhelmly#p/a/u/1/_YtF0c2bmkw
Dave export the video from PremiereProCS5 as "MPEG2-bluray" format with "Match Source Attributes (HighQuality)" Preset, and build the Bluray Disc in EncoreCS5, with the footage as MPEG2 with .m2v file extension:
1) Anyone tried to play correctly in 3D, those MPEG2-.m2v side-by-side files, in Panasonic3DTV, with BlurayDiscReader?
2) Why MPEG2.m2v side-by-side?
3) The official standard stereoscopic 3D format, is not the .MVC (MultiViewCoding) for Bluray3D Disc?
I am confused!
Help!
Horsepower0171.

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

You can't use this version of the application "logic pro" with this version of os x

After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
'you can't use this version of the application "logic pro" with this version of os x'

Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

HT5287 Can I use remote disk on a 2008 unibody MacBook with no optical drive?

Can I use remote disk on a 2008 unibody MacBook with no optical drive?

According to the link you came from the only MacBooks this works with are MacBook Air and MacBook Pro with Retina display. If yours is not one of these I can see no harm in trying it.
You could consider getting an external optical drive.

Unable to open mail, address book etc due to this message: You can't use this version of the application Address Book with this version of Mac OS X. HELP!

I am transferring my mother's address book and mail etc to my computer from an external hard drive enclosure and am not able to open it due to this message: You can't use this version of the application Address Book with this version of Mac OS X. HELP! Is there a way to open her older applications and get the info out?

her email is in user>Library>Mail folder. Hopefully you've created another user on your Mac for your mother so she would have her own user Library.

Can I use my Samsung Galaxy 3 as my reader with digital editions?

Can I use my Samsung Galaxy 3 as my reader with digital editions?

You should install an app such as Bluefire or Aldiko, or for Overdrive if it is just for library books.
I don't think the device will actually show up in Digital Editions (ADE).
For non-DRM books you don't need ADE at all.
For DRM books you need to make sure the app is registered to the same AdobeID as your copy of ADE.
You can than
get books onto ADE in the usual way,
'sideload' the .epub to the Galaxy; eg copy using a file manager such as Windows Explorer or Mac Finder
read the books on the Galaxy.
Good luck.

You can't use this version of the application Logic Pro with this version of Mac OS X.

You can't use this version of the application Logic Pro with this version of Mac OS X. why am i getting this message after upgrading to lion

<Bump>
See this thread.
https://discussions.apple.com/message/15700842#15700842
and this one.
https://discussions.apple.com/message/15700505#15700505
pancenter-

Can i use Internal DHCP on WLC Guest Anchor (5508) with Foreign HA 5508

Similar Messages

Maybe you are looking for