Can I use iPad air cellular data in nepal? Does iPad air is carrier locked?

Can I use iPad air cellular data in nepal? Does iPad air is carrier locked when we buy? Please give idea.

Hi Narayanfromct,
If you have questions about using cellular data while traveling with your iPad, you may find the following article helpful:
iPhone and iPad: Using cellular networks while in another country
http://support.apple.com/kb/ht1807
Regards,
- Brenden

Similar Messages

  • My Ipad's repeatedly  asking for activation and can't be activate through cellular data, what could I do?

    MY Ipad's repeatedly asking for activation, even though I activated 20 times, not kidding! And the worst is I can't activate it through cellular data, for no good reason. Yes, I checked the setting for the cellular data about itunes and so on. I also tried to reboot, to remove and put back the sim card. I also tried to send a request to apple support, but the f... button in the email sent doesn't work. I'm kind of ****** off, cause I couldn't use my ipad all the last evening till I get to a wifi zone... What the **** is going on with Apple? It's getting worst and worst... I have a ipad retina, not the last generation, but the one before... Not sure which number it is though.

    I understand the question fully. Your issue is that the activation does not seem to be registering nor working properly (which is why you keep being asked to activate it). Maybe activating through Wi-Fi will activate the iPad properly since as you say yourself, "I can't activate the Ipad by cellular data." I don't think it would much more trouble to try it through Wi-Fi and could very well solve your issue.
    A question does not come up though...which activation are you actually talking about? The initial activation of the iPad for use (when you are first setting up the device) or the activation for cellular data with the device's cellular data carrier for use on the device? My initial response was for the first scenario.

  • HT4157 Can't find the Cellular data option on my iPad

    Can't find the Cellular Data option on my iPad but can see it on iPhone 4S

    So sorry everybody. I have found the answer. Silly me !

  • HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

  • Turn off phone capability of iPhone and continue using cps and cellular data?

    Can I turn off phone capability of any iPhone and continue using cps and cellular data, practically using the device as iPad? Is this going to be possible with iOS8 or iPhone 6 Plus?

    This could be what you are looking for:
    Using an iPhone without a wireless service plan

  • Changed my appleid password and now can't find AT&T cellular data network

    A few days ago, I changed my appleid password.  This morning I had occasion to try to use the AT&T cellular data network on my ipad and it keeps being unable to find it, coming back saying "No Service".  I do not believe there is truly an outage on that network.  I am using iOS 7.0.6.  I can access everything via my wireless network with no problem, using the new appleid password.  I have tried resetting the network settings on my ipad, turning off Find my Ipad, and restarting the ipad with no effect.  I just successfully backed up my ipad to Icloud and am about to do so to my computer as well, prior to trying a reset to factory settings.  Before I do the reset to factory settings, I thought I would ask if there are any other ideas or if this is some sort of known bug?  Thanks.

    Hello Working2,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Turn iPhone off and then on again.
    Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
    Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Restore the iPhone.
    Have a nice day,
    Mario

  • HT4157 I have a cellular data account on my iPad. Almost immediately after I signed up, my e-mail was hacked and had to be cancelled. I cannot get into my AT&T cellular data account now to change the billing and account to my new e-mail. Please help.

    I have a cellular data account on my iPad. Almost immediately after I signed up, my e-mail was hacked and had to be cancelled. I cannot get into my AT&T cellular data account now to change the billing and account to my new e-mail. Please help.

    According to the AT&T Wireless web site, you can manage your iPad data plan either from the iPad, or by using a web browser:
    From the website
    Log in to your account at att.com/iPadlanding using the email address and password you used during activation.
    Your account information will display. Select the desired account change option then tap Next.
    Read the Terms of Service, and then tap Accept.
    Review the Payment Summary to ensure the details are correct. Use the Back button if changes are required, otherwise tap Submit.
    Read the Confirmation message then tap OK.

  • Can i use a 85 watt charger with a new macbook air

    Can i use a 85 watt charger with a new macbook air that comes with a 45 watt charger. One says its 14.8 volts and the other is 20 volts.

    To be clear, the wattage of the adapter is not the power delivered to the Mac, but rather the power the adapter is capable of delivering.
    Think of it as the difference between a 200 HP and a 400 HP engine; both can drive at a certain speed with no issues, the difference is what happens if you floor the gas pedal.
    The same is true between the higher wattage power adapter that comes with the iPad and the one that comes with iPhones; you can use the higher wattage adapter to charge and iPhone with no issue, but if you try and use the iPhone adapter to charge the iPad it may work, but it will take much, much longer.

  • What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?

    What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?

    Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
    You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
    http://support.apple.com/kb/ht2519
    Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now.

  • HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

    itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Can I use the same wall adapter to charge my ipad and my ipod

    Can I use the same wall adapter to charge my ipad and my ipod touch

    No offense, but that's nice. I heard I was wrong and that what I said didn't make sense, so I simplified it. If I'm wrong, fine, but you have no reason to be such a *****. You never explained why I was wrong and you were right, so how am I or anyone else suppose to know that for sure? Then I tell you my source, and you insult me some more and then ask for my background, which as for this area goes, I already gave you. I worked at an Apple store for Christmas and was told by someone on the Genius team to tell customers not to charge iPads via iPhone chargers, as they had been known to fry the adapter or in one weird case, the actual outlet. Now I could see the outlet blowing be a bunch of other contributing factors, and not directly associated with the charger. However, the topic arose when a customer came in because her iPhone wall adapter didn't seem to be working, but wasn't that old, and admitted to charging her iPad with it. Why would I NOT believe that?
    And my DEEPEST apologies on commenting on old threads. I know how vital that is to existance and what an inconvenience it is to EVERYONE else. I'll be honest, I wasn't checking dates as I assumed suggested posts with like one answer near the top of the list were newer.
    Fine, I did something foolish, but I still win as I'm not either of you heartless ****** with nothing better to do than Internet harass others. Congratulations on your existences.

  • Can you use SQL as a data source for a project in the same way you can in Excel?

    Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
    the data from the stored procedure as a series of tasks?
    Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
    it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

    No, You can not use sql as a data source for a project.
    You have 3 options to achieve it:
    1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
    2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
    3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
    create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
    kirtesh

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • Can I use 2 apple ID's in my iPhone, iPad and PC ?

    Hello
    Can I use 2 apple ID's in my iPhone, iPad and PC ?
    I will explain better my situation I had my US Apple market for 5 years I had alot of apps, music and movies I bought.
    the issue is i might be reloacte to Canada and I would like keep my US account and open a Canadian account apple market but I read on internet you can not have 2 Apple ID's withouth a restricion of 90 days.....I don't undertand that part ......
    Please explain me how i can have 2 account in 2 direfent countries ??
    Because I need th US account for updates my apps or buy some US apps but also I would like buy native Canadian apps........
    I don't have iTunes match or automaitc donwload.
    Thanks in advance for your answer Thanks again  !!!

    Settings>Store...tap the ID shown...sign out...now sign back in with the ID you want to use.

  • Can you use a Macbook Pro power connector on a Mac Air?

    Can you use a Macbook Pro power supply on a Mac Air?

    Here's where Apple says it's ok too.
    http://support.apple.com/kb/HT2346

Maybe you are looking for