Can I use iphone earbuds with a mac pro tower? And with an extension cord?

I also need to use an extension cable because of my standing desk (tower is on the floor). I get confused with the 2-band jack, the 3-band jack, etc. I haven't been successful using a regular, radio shack type of headphone extension cord. Salesmen give me a blank stare when I try to explain that I have iphone earbuds with a 3-band jack and that it doesn't work with a regular extension cord. It's like I'm speaking Swahili.

You can't using 4-band iPhone earphone with Mac Pro.
You need to get 3-band earphone and extension cable.
I've been using iPod shuffle's earphone with extension cable osn it works well.
http://www.amazon.com/iMBAPrice-iMBA-PS-12MF-12-Feet-Plated-Extension/dp/B009UEB UZQ/ref=sr_1_5?s=electronics&ie=UTF8&qid=1382758521&sr=1-5

Similar Messages

  • Can i use iphone 5s t mobile contact free in indonesia with my indonesia sim card?

    Anyone help me, can i use iphone 5s t mobile contract free in indonesia with my indonesia sim card?

    Try reading the question again, but this time properly and you will see that the question does not say "mobile contract"?.
    What it actually says is "iPhone 5s T-Mobile Contract Free".  There is a difference and as you have not read the question properly you are providing a response that is just not applicable.

  • Can we use FCP conviniently while my mac pro is attached to a LED tv

    can we use FCP conviniently while my mac pro is attached to a LED tv (46inch).
    I am afraid if the icons will also blow up/get bigger and would become inconvinient to use.

    most large TV sets are still 1080p (1920 by 1080).
    The icons will appear to take up more space (in square inches) on the TV, but will be "grainy" compared to your monitor. The fundamental size of icons and items on screen (in pixels) will not change. When you return to using a monitor, things will be the same as before.

  • As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000  photograph were not catalogued correctly, or hardly at all, so now ov

    As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000  photograph were not catalogued correctly, or hardly at all, so now over several months time my photos have apparently been redirected in my libraries and have begun not appearing in their allotted frames next to their number in the library they are in. they also have a small question mark (?) next to the photo space. The frames are blank but indicates that there is a photo there. The majority of photos are blank but about a tenth are seen . i apparently need to retrace where they went but do not know how to get that done . can someone help please?

    It would be difficult to tell you where to begin. If you moved photos around to different folders and didn't use Lightroom to move them, that would cause Lightroom to lose track of where they are. You have to remember that your images are not "in" Lightroom. Lightroom simply points to them wherever they are on your computer. All of the location information as well as the changes that you make to your images is stored in the catalog, which is a database. This catalog is central to the operation of Lightroom, and it's essential that you understand how it works and how to make it work for you. For all of those images that have "?" On them, or the folders that have the same, you will have to go through the process of locating them and showing Lightroom where they are located. With 18,000 images, and many of them missing, it might just be easier to start a new catalog and organize things properly from the beginning in that catalog.

  • Using an external microphone with a Mac Pro Tower

    I have a Mac Pro tower with OS 10.4.11 and I have a question regarding recording sound through an external microphone.
    I own a microphone with a 1/4" jack and when I plug it into the designated input on the back of my tower, I'm not getting any sound. I've troubleshooted with a couple different microphones and none seem to work. Am I doing something wrong? Is there some sort of configuration that I have to do when using a mic?
    Please help!

    I'm sorry, but that's not really my area of expertise. If you are planning to use this for simple voice-recording you could try the Griffin iMic device which helps provide both pre-amplification and impedance matching between a mini-plug mic and a USB port for sound input. I've used it recording music from a boom-box to a MacBook.
    The tech specs state that the audio line-level in port is:
    Input impedance greater than 20,000 ohms
    Input level: Max 2 V rms (+8.2 dbµ)
    I would look for a mic that meets those specifications. MacSpeech.com has several microphone/headset recommendations for use with their Dictate and iListen voice recognition software. I would think that their suggestions would be useful.

  • Wireless connection to internet with mac pro tower and airport extreme base station?

    Hi, I have an airport extreme base station and a mac pro tower without a airport card. My internet wireless router is a great distance from my computer so I can't connect the base station directly to the router. I've attached the airport extreme base station to the tower via an ethernet cable, the base station seems to be wirelessly connected to the home network but the browser is showing "not connected".
    Please help.
    Thanks

    Shouldn't the Airport base station be able to connect to it wirelessly?
    It might be possible, but the Ethernet ports on the AirPort Extreme would not be enabled, even if it did connect to the Thompson' WiFi signal.
    As Tesserax notes, among the Apple routers, only the 802.11n versions of the AirPort Express have the capability to "join" a wireless network with the Ethernet port being enabled.

  • Can i use iPhone T-mobile contract free version outside USA with any carrier?

    Hello everyone,
    I am planning to purchase the iPhone 6 via Apple online store, on or after september 19th.
    I am living in Sri Lanka and obviously we do not have AT&T or any other service providers listed, here. My only option would be to buy the T-mobile 'contract-free' version if I am not willing to wait till Apple releases an unlocked 'sim-free' version within next few months. Therefor, I want to confirm and make sure that I can use the iPhone T-Mobile version with any carrier of my choice and is not locked only for T-mobile and can be used here in Sri Lanka.
    Hoping for your kind support
    Regards,
    Nimasha

    Hey Nicolas,
    I had the same question, so I went to the Apple chat, and I asked the same, 'cause I need an iPhone to works in South America and Europe as well.
    so what the person on the chat  answered me was that the T-mobile cellphone comes Unlocked, so you can use it anywhere.
    I Guess I can get it and now.

  • Can I use iPhone 3GS as a modem for Internet browsing with PC?

    I need to know the settings for using iPhone 3GS as a modem for my PC.

    Called Personal Hotspot, & needs to be supported by your carrier:
    http://support.apple.com/kb/HT4517

  • Can I use a NTFS HD in Mac Pro for Bootcamp/Parallels?

    Hi,
    I'm a long time PC user who has just recently bought a Mac Pro.
    I have a HD in my old PC (74GB WD Raptor) that I would like to install in my Mac Pro, with the intention of using this drive as a Bootcamp partition. The HD is formatted but in NTFS.
    If I install this HD in my Mac Pro will it recognise it? Will I be able to install Bootcamp & Windows XP on it? Or will I have to convert the HD to FAT32 (where I think the max partition size is 32GB)?
    Also, If using Parrallels, is there any advantage in using a Bootcamp installation of Windows, or should I just forget about Bootcamp?
    Cheers,
    Simon

    Once you create the partition using Boot camp you can then Follow the steps to get to the Windows partition and format the partition either way.
    From page 12 of the Boot Camp Installation Guide:
    "NFTS provides better reliability and security, but you will not be able to save files to the Windows volume from OS X.
    FAT provides better compatibility allowing you to read and write files on the Windows volume from OS X. This option is available only if the Windows partition you created is 32GB or smaller."

  • Can I use two graphics card in Mac Pro

    In order to use the CUDA advantage in Adobe Premiere Pro I bought an NVIDA Quadro FX4800. The original graphics processor in my Mac Pro (mid2010) is a ATI Radeon HD 5770. Can I use both cards? How do I ensure that Premiere is using the CUDA architecture if both cards are installed? Does a graphics card work if no monitor is attached to it?

    Newer cards have minidisplay port and then use MDP to DVI (active dual link for higher resolution).
    Yes you can have an ATI and Quadro or GTX.
    Most people, based on cost/performance go with newest Nvidia instead.
    You can run up against the limits of having two 6-pin aux power connections available.

  • Can SpeedGrade use GPU Acceleration in New Mac Pro?

    Good afternoon, I would like to know if Adobe SpeedGrade is able to take advantage of GPU acceleration AMD FirePro D500 installed in the brand new Mac Pro. Thanks in advance for your reply.
    Message was edited by: Kevin Monahan
    Reason: More searchable title

    Supported GPU technologies (Mac):
    - AMD/nVidia OpenCL for direct link in MacOS 10.8.5 and higher
    - OpenGL for SG native
    Supported GPU technologies (Win):
    - AMD OpenCL, nVidia Cuda for direct link in Win7,Win8, Win8.1
    - OpenGL for SG native
    Note: Although SG not utilises two GPU's, it should run fine on your new Mac Pro and use OpenCL for acceleration

  • Can you use regular PCI cards in Mac Pro?

    My G5 is getting a bit long in the tooth and I want to buy a Mac Pro. It says that it supports PCI Express cards, but I have several PCI cards in my PowerMac. Since I don't want to buy them all over again, I was wondering if they will work in the Mac Pro?

    Hello Hatter,
    There is an external solution Now, (Thanks to a Genius named Markus) I have mine running a treat on My Macpro.
    http://discussions.apple.com/thread.jspa?messageID=7921458
    Cheers
    Tom K

  • Newest version of itunes not compatible with my Mac Pro 15" and no new updates available for my Mac

    I was able to dowload and install itunes on my windows but was unable to on my Mac due to an error mesage that states that it needs a newer version to install Itunes
    i have Mac pro softwere version 10.5.8
    asking for at least a 10.6
    and on my current Itunes ipad mini wont connect

    Snow Leopard comes on a disk that can only be purchased from the Apple website, NOT the App store;
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Ciao.

  • Can I use windows 7 on my Mac mini 2.1 with bootcamp?

    I have a Mac Mini 2.1 running OS 10.5.8, and an unspecified version of bootcamp. Currently using Windows XP. I want to upgrade to Windows 7. Can I do this? If so, do I need 32 bit version or 64 bit version?

    Just a heads up, you don't need to run bootcamp to install windows on a Mac (if you want it to be the primary OS)
    I have a Core 2 Duo Mac mini running Win7 x64 without any issues. I will check which model it is later.
    It has 5 USB, FW 800, and displayport + mini displayport (if that helps identify the model)

  • I can't use the speakers in my mac pro

    dear i am trying to hear from the speakers but nothing i enter system setup and go sound but the speakers are not found so what i have to do ?? only earphones and digital output is working

    System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

Maybe you are looking for

  • Dreamweaver and Business Catalyst

    I have more than one portal that I would like to connect to with Dreamweaver to do BC Web Developement.  I can't figure out how to connect to BC to use the integrated functionality like adding tags from the site with anything but my profile portal.

  • MacBook7,1 - Moshi mini displayport to tv

    I have the latest model macbook... the Macbook that came out late 2010. See picture I bought the moshi mini display port to hdmi adapter with audio .... (click hyperlink to see). I have a 65 inch Mitsubishi tv and a 70 inch sharp aquos tv.  I cannot

  • Why we dont use STANDBY_ARCHIVE_DEST in oracle 10g

    Hi, Why we dont use standby_archive_dest in oracle 10g standby database, at which location the archives will arrive in standby database if standby redo logs created & at which location the archives will arrive in standby database if standby redo logs

  • Intergrate any ABAP transaction in a ABAP WD application (not via ITS!)

    Can I integrate any standard ABAP transaction in a ABAP Webdynpro application, for instance in a  Popup? (not ITS!). My workaround is: To create an iView for the ABAP transaction in the portal and to call the iView using the iVIEW URL. This works, bu

  • Lists - hierarchical expanding

    Hi, I created a hierarchical list with template "hierarchical expanding". When I click on a list entry to go to a page, the tree will not remain expend to the List entry current. The tree will always shrink back to the hightest level. Is there a way