Can I use KVR400X64C3A/1G to my 865PE Neo2-V ?

I bought new Kingston memory to my PC but I'm not sure if I can use them ?
Will the M/B support CL3 (3-3-3) Dimm ?

yep, will run fine.

Similar Messages

  • Using 3 Memory modules on 865PE Neo2-V

    Hi ! I wonder if it´s possible to install three 512MB DDR 400 sticks on a 865PE Neo2-V motherboard (As it has only 3 slots) Will it work as DDR, even if one channel has 1GB and the other 512MB ???
    BTW, I´ve always used two 512 MB sticks on one channel (same color slots) Should I see any performance increase if I switch one stick to the other channel ? (one green and one purple)
    Thanks for your help !!!

    Quote from: Maesus on 23-February-06, 06:28:03
    If you want dual channel performance, make sure you plug the DIMM at slot 1 and slot 3; or slot 2 and slot 4. If you have 3 DIMMs and plug them all, you will not have dual-channel performance but you have 512MB more RAM, which will definitely help to reduce the amount of transfer of virtual memory in your HDD and thus improve the overall performance.
    So I understand that 1,5 GB of RAM on Single Channel will perform better than 1 GB on Dual Channel ?

  • 865pe neo2-ls : i can only use slow mode

    i can only use the slow performance mode....can't use fast or turbo mode. If i choose fast or turbo mode, the computer can still boot up. But it will reboot automatically within seconds windows boot up.....
    my configuration is:
    pentium 4 2.4C
    865pe neo2-ls
    2x256mb ram ddr400 kingston
    windows xp w/sp1
    can anyone help me???

    Quote
    Originally posted by jpscwf
    adamchubb: My dram setting is 3,3,2,5 in turbo mode n very stable. As 4 ur configuration, it is same as mine.
    I can run my cpu maximum fsb 280 with force the dram frequency to 266.
    I suggest u 2 set ur fsb 2 250 n ur dram to 333. Which ur ram will running 400MHz assynchronous with the 250FSB but this will disable the M.A.T.
    Anyway, what is ur cpu, NB n sys temp?
    Mines 1 is cpu=57, nb=42, sys=49 at full load.
    i'm not sure if my pc is at full load.
    i just open several windows, playing back dvd, online streaming video, playing back mp3. CPU ~60, NB~4x, Sys ~5x

  • Can i use 533 ram ??

    can i use 533 ram with my board :  msi 865pe pls ??????????

    Most suitable PSUs for any system will be like Antec TruePower 480w, Enermax Noisetakers 470w, Enermax 465watts, PowerPC 550watts, OCZ 550watts etc.
    Like I said, 533MHz RAMs are meant for o/c'ing so there'll be no official statement that it'll be 100% supported as the highest stable for a FSB 800MHz CPU is DDR 400MHz RAMs which are reconisged by Intel and anything higher than that is considered for o/c'ing purposes.
    If you die die wants to buy the DDR 533s, I recommend Kingston or Geil Golden Dragon series. You may want to check out what other users are using for their RAMs vs Mobos.

  • Can we use IF statement in PDF templates

    Hi,
    I developed a PDF template. I need to underline ang bold the records based on a specific condition. Can we use IF conditon in PDF templates. Please suggest.
    Thanks...

    Billy  Verreynne  wrote:
    The case syntax is a bit funny though as there's not a single condition evaluation (like a DECODE or case structs from some other languages).
    This is what I would expect a typical case struct to look like - evaluating a single condition:
    case <condition>
    when <value-1> then return <result-1>
    when <value-n> then return <result-n>
    else
    return <return-z>
    end
    ?:| You mean like this...?
    SQL> ed
    Wrote file afiedt.buf
      1  select empno, ename, deptno
      2        ,case deptno
      3           when 10 then 'This is Department 10'
      4           when 20 then 'And department 20'
      5           when 30 then 'And of course department 30'
      6         else
      7           'Blimey it is something else!'
      8         end as dept_desc
      9* from emp
    SQL> /
         EMPNO ENAME          DEPTNO DEPT_DESC
          7369 SMITH              20 And department 20
          7499 ALLEN              30 And of course department 30
          7521 WARD               30 And of course department 30
          7566 JONES              20 And department 20
          7654 MARTIN             30 And of course department 30
          7698 BLAKE              30 And of course department 30
          7782 CLARK              10 This is Department 10
          7788 SCOTT              20 And department 20
          7839 KING               10 This is Department 10
          7844 TURNER             30 And of course department 30
          7876 ADAMS              20 And department 20
          7900 JAMES              30 And of course department 30
          7902 FORD               20 And department 20
          7934 MILLER             10 This is Department 10
    14 rows selected.

  • In alv report can i use control break events? if no .whay?

    Hi all,
    in alv report can i use control break events? if no .whay?

    hi,
    you can use control break statements in ALV report.
    for example: if one PO is having more than one line item, that time you need to display PO only once.

  • HT1751 I need to uninstall and reinstall iTunes (it won't let me update). So, how do I copy or back up my iTunes library of over 1,500 songs? Can I use a Flash Drive to do so?

    I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool  to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.

    Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to  'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
    The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
    Thanks for the info.

  • How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

    How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

    "Method Three
    Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
    This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
    I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

  • Can I Use iTunes Store without Storing Bank Accounts, etc, in my Profile?

    Hi
    Today a fraudulent charge of $89.99 appeared on my iTunes account. This suggests that a hacker has obtained my password, and hence access to all information in my iTunes account, including credit card or Paypal account information. I can deal with having to claim refunds for fraudulent iTunes purchases, but I cannot afford to risk ID Theft, or to have my back account information in the possession of hackers.
    (1) Is it possible to maintain an iTunes account that does not store bank accounts, and ideally stores no personal information other than my email address?
    (2) If I can do this, I assume I'd then have to enter that information for each purchase. Will this information be expunged once the ourchase is complete? Or would it remain on the system in some form, accessible to hackers?
    (3) If (1) is not possible, how do I cancel my iTunes account? There does not seem to be such an option on the iTunes Account Management screens.
    Thanks,
    Chris

    You can remove your credit card from your account. Go into the account, click "Edit payment information" and you will see the option under credit card to click "None."
    For purchasing, you can either enter the card info per transaction, or you can start using iTunes gift cards which are readily available.

  • How can I use apps downloaded by different users on the same iPad?

    I have a 'work' iPad so the apps on it have been downloaded using two different accounts. Which was fine until I did an update at the weekend and suddenly I can only use the one's I downloaded. Is there anyway of 'sharing' these apps so who logs in can use all the apps?

    No, I don't think there is. As far as I know the iPad is meant to be a 'one per Apple ID' device...and isn't really meant to have multiple Apple ID's  downloading apps to a singular device.
    I think the simplest way around your issue is to use only one Apple ID to download everything.

  • Can i use 2 ipad's on the same itunes account with different apple accounts?

    Both me and partner have an ipad 4. Though we only have one computer, can we use the same itunes but with different apple acount without any issues? We use some of the same apps, but my partner plays fx Baldus Gate and is worries that save files will be corrupted.

    Each iPad should be linked to its owner's personal, private and nonshared AppleID. In the Mac, each one should have a different login account so each has their own iTunes Library containing your iPad's details. When you use iTunes on the Mac, since each logs in with a different login and corresponding Home directory, iTunes picks up the correct AppleID.

  • How can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

    how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

    If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.

  • How many computers can I use my account on

    I have just started a 6 month contracting role as an in house designer.  Can I use my account at this new premisis while still using it at home for my home business?

    Hi All,
    One Creative Cloud Subscription entitles you to install on two computers.
    Can I use the software I download from Creative Cloud on multiple computers?Yes, you can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
    The above excerpt is from link: 
    http://www.adobe.com/products/creativecloud/faq.html
    You can go through various information regarding the Creative Cloud from this link.
    Regards,
    Rajshree

  • How can I use one background jpeg in my ebook without a large file size

    I'm guessing that by simply adding a background image or watermark by default adds a separate copy to each page. Since I am intending for them to be the same on all pages except for the title page, how do I shrink the final file size of my PDF eBooks so that the image is stored once but shown on all pages?
    Thanks in advance.

    Thank you, I understand, yeah, I knew that, my phone is factory unlocked and I am going home, which is obviously not in the States and I am thinking of buying a local carrier there. However, I still have 2 weeks before I leave and cannnot wait to start using my Iphone 4. I thought at least I could use the mp3 player function. So as far as I understand, I cannot activate it without a sim card. I have been using metropcs for about two years and it does not have a sim card. In this case, do I really not have another choice but wait for two weeks to listen to music? My Mp3 player just failed me and I really need to listen to music but on the other hand, while I can use my iphone as an mp3 player in two weeks, I don't want to spend more money on a new one. So, do you have another suggestion? For instance, can I use a friend's sim card to activate mine? Would this cause any trouble, when I go home and buy a local carrier? I think these questions might kinda sound weird to you, but first time with an Iphone, extremely excited to start using under my circumstances, I need help   thanks,

  • How can I use one photo twice in a slideshow

    I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
    How can I use this one particular photo of her several times in the slide show.
    I have tried copy/past and that does not seem to work.
    Thanx in advance

    I would just duplicate the picture several times and keep inserting duplicates ...

Maybe you are looking for