Can I use LabVIEW to program a Galil controller​, such as the DMC 740?

Can I use LabVIEW to program a Galil controller, such as the DMC 740?  need a driver.

vmagui,
I don't know a Galil DMC-740. Do you mean the Galil DMC-1740? In this case you are talking about an ISA bus board and it might be hard to find a PC that provides ISA bus slots and enough power to run an up to date LabVIEW version.
In general LabVIEW is an open platform, so if Galil provides a LabVIEW library or at least a well documented DLL you should be able to use their boards in LabVIEW. You should contact Galil for this information.
If you are really talking about an ISA board you should consider an upgrade to a newer bus technology like PCI. NI also provides a whole range of high quality motion control products that are at least comparable to Galil boards (http://www.ni.com/motion). A good LabVIEW integration for these devices is self-evident and they integrate easily with other NI products like multifunction data acquisition boards, machine vision products and bus interfaces.
Kind regards,
Jochen Klier
National Instruments
Message Edited by Jochen on 07-22-2008 04:37 PM

Similar Messages

  • How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100 format) out the serial port of my computer?

    I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?

    If I recall, CTRL-D is EOF on most ASCII tables.
    You'd probably have to use an escape sequence
    or if you can use an unsigned 8-bit that might be
    easier.
    In article <[email protected]>, TLS
    wrote:
    > How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
    > format) out the serial port of my computer?
    >
    > I am trying to write a vi that interfaces with a piece of OEM
    > equipment that is set up to talk with a VT 100 terminal. I can't seem
    > to locate the ASCII equivalent string (if there is such a thing) of a
    > CTRL D. Is there a vi that emulates VT 100 commands?

  • HT1277 Can you use Apple Mail program Rules and Gmail filters together?

    Can you use Apple Mail program Rules and Gmail filters together? Does the gmail filtering override the Mail Rules?

    Mail > Window > Previous Recipients

  • Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card and now I want it to go directly to system memory.

    Can I use LabVIEW to load data directly into system memory from a VI? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Call Library function to read the data from the card and now I want it to go directly to system memory.
    The data is being received at 1Mbps.
    Thanks

    Two questions:
    One, if it's a serial card, then presumably it gives you more serial ports, like COM3, COM4, etc. If so, VISA would see the COM ports, and not the card directly. The drivers for the card should make it so that you see the extra serial ports from the OS. If you don't see the extra COM ports from VISA, then it sounds like the drivers for the card are not installed properly. Do the extra COM ports show up in Device Manager?
    Two, you said that you're using a Call Library function to get the data and you want to put it into system memory. Errr.... you just read the data and you have it in memory by definition. Are you saying you need a way to parse the data so it shows up on a graph or something?

  • Just upgraded to Lion and can not use my QuarkXpress program.

    Just upgraded to Lion and can not use my QuarkXpress program.

    Your best bet is to check the version of QuarkXPress you have. Since Lion does not include Rosetta my guess is this may be why it is not working. Check out this site http://roaringapps.com/apps:table. This site has a list of apps that work and don't work under Mac OS X Lion.
    If you are working in a production environment freelance or stuido that uses design apps like QuarkXPress, Adobe InDesign, Illustrator, Photoshop you should always wait to upgrade your OS. We have a 3 to 6 month policy for upgrading computers and software.
    I hope the website helps.  http://roaringapps.com/apps:table
    Good Luck

  • Can I use my InDesign program on my PC and MAC?

    Can I use my InDesign program on my PC and MAC?

    If you ask a question, you have to tell always which version you want to use. The answer depends on the version.
    In you case it depends additionally on the licence program you are using. EDU is different then others.

  • Can i use my ipod on another pc without losing all the tunes i have on it??

    can i use my ipod on another pc without losing all the tunes i have on it?? the last thing i want to happen is lose 40gb of tracks!!ANY HELP WOULD BE GREAT

    just goto the ipod preferences and select manually update music then you can plug it into any computer which is the same type and the original. e.g. windows or mac

  • Can I use an iPad, iPad mini and iPod touch on the same apple account?

    Can I use an iPad, iPad Mini and iPod touch on the same account?  Is there a limit to how many devices I can use?

    When you turn on your iDevice for the first time just sign in with the same Apple ID and you can download any apps you have purchased in the past! There shouldn't be a limit to how many devices you can use.

  • Can you use home share where there are 2 itunes on the same computer but under different user profiles?

    Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?

    check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer

  • What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

    what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
    I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
    How much trade-in value can I get from VZW or BestBuy or Amazon?
    Thanks!

    http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
    DROID Bionic:  (9/8 launch) – You already know everything about this device, don’t you?
    Samsung Stratosphere:  (9/8 launch) – 4G LTE device running Android 2.3
    HTC Vigor:  (10/6 launch) – Will replace the HTC Thunderbolt
    LG Revolution 2:  (10/20 launch) – Will replace the original Revolution
    Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
    Samsung Illusion:  (9/29 launch) – 3G smartphone running Android 2.3
    Samsung Plato:  (January launch) – whatever it is, it was pushed to 2012
    HTC Bliss:  (9/29 launch) – Lower end Android 2.3 device; the chick phone?
    Motorola XOOM 4G LTE:  (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

  • How can I use Applescript to copy a file's icon to the clipboard?

    Hello,
    How can I use Applescript to copy a file's icon to the clipboard?
    Thanks.
    Lennox

    there is no way to do that that I know of. but you can extract an icon of a file to another file using command line tool [osxutils|http://sourceforge.net/projects/osxutils]. you can then call the relevant command from apple script using "do shell script".

  • HT4972 how come i can not use iOS 6 on my ipad 3 to get the youtube or pinerest app? it keeps giving me a message to use iOS5

    How come i can not use iOS 6 on my ipad 3 to get the youtube and pinerest app? i keep getting a message to update to iOS5 if i must use iOS5 how do i update to that one because it just took me 4 hours to figure out how to update to iOS6

    We have read that any apps that use the google map app (removed by ios6) will not work.  We have lost a great camping app for this reason, and have heard that some weather apps are not working either.  The company line we've been given is it's up to the app developer to rewrite their apps.  ***** doesn't it.

  • Can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

    can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

    Yes. Any standalone display which can be connected to a Mini DisplayPort, with or without an adapter, can be plugged into a Thunderbolt port without any additional adapters.
    (65766)

  • Hi, can i use Canadian itunes prepaid card to buy music in the France itunes store ??

    Hi, can i use Canadian itunes prepaid card to buy music in the France itunes store ??

    No, the iTunes card is only valid in the country where it is sold...and you must be physically in that country to use it.

  • Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!

    Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!
    The WD My Passport, I purchased back in early December 2013 & I just used it the other day after I updated my Macbook... & of course it says in the online manual it works for Mac Lion, Mountain Lion, Snow Leopard but not this new Maverick update. Is there anything I can do?

    I like the free demo of SuperDuper to make clones. It's free, Tiger and Leopard ready and is easy to use. If you buy the full version you can do incremental backups.
    You should use Disk Utility to do a Disk Repair, as shown in this link, booted up on your install disk, before you make a clone of it.
    I then partition my external disk, in Disk Utility, with a partition that is the same size , actually a tad bigger, as my system disk. I then use SuperDuper to clone my system disk over to that partition.
    With a clone on an external FireWire drive (USB drives are not bootable on some Macs) you can bootup on it to do your repairs or just run your Mac anytime you have trouble with your main drive. Be careful, there are a few external FireWire drives out there that are not bootable on Macs. Check the drive's manual to be sure.
     DALE

Maybe you are looking for

  • Using the States Example how can I set Selected to Maryland Without RowNumber

    Let's use the states example for the sake of everyone having the code in front of them. If I am returning a value from the database that I am writting out to the application like this <%out.write("STATE_NAME"); %> how can I set the selected value to

  • Error when "run" the "helloworld" project

    Hello the expert, I am a newbie to the Weblogic. I am trying to setup a helloworld project on Eclipse using Weblogic server. When I "run" the project, I got the following error below. Could anyone please point me out what I did wrong on my setup? Tha

  • Recruitment - Problem in Applicant activities

    Hi Friends, In recruitment I uploaded all required data for applicants,but when I'm transporting data from recruitment to PA system throuing error applicant activity not found. But as I'm aware of that IT 4003 (Applicant activity) has to create by sy

  • Regarding NFS Process

    Hi All, I have a report generated in R/3 application server and file is placed in the R/3 application server under a particular folder, I want access this application server path in XI communication channel using NFS. While specifying the path in the

  • There is no  "installation runtime" under Windows- Preferences in Eclipse

    Hi everyone, iam using Eclipse 3.1. Iam using an Application server(JBOSS). In order to add an application server, we will be adding it under Windows->Preferences->Server. But i dont have the option for "server" in my eclipse. Please give me the solu