Can I use Logic sounds in Band In A Box?

Just bought Band In A Box. The sounds are - so-so.
Is there an easy way to use Logic sounds with it?
I called PG Music - they don't know Logic well... so I'm posting here.
Thanks!

I Don't this this is possible..
How about going the other way around? I have both Logic and BITB, and exported MIDI from BITB and brought that into Logic, then tweaked from there to get good sounding instruments.
You could create a Logic song with your favorite instruments all set up, then import the Midi.. Should only take a few minutes to get a new arrangment up and running once it was done initially.

Similar Messages

Logic sounds into Band In a Box

Anyhow - I'd love to know how to get Logic sounds to work withing BIAB.
Found this thread on the internet:
http://wordpress.37hz.net/?p=347
Does this thread sound right? I downloaded the guy's Logic file - can't get it to work. I don't understand the Environment well enough.

Misterioso:
All you need to do is follow the instructions on the 37Hz blog post through Step 4. For each track you set up, make sure you set the MIDI channel (in the Track Parameter box in the Inspector) to match the corresponding channel in the BIAB MIDI setup.
Then forget about all that Environment stuff.
Follow Fred B's suggestion to enable Multiplayer Recording in Logic: Switch on the File > Project Settings > Recording > “Auto demix by channel if multitrack recording” option.
Then click the "R" button on each Logic track so that it glows red.
If it all goes correctly, you should be able to play a BIAB song and hear the instruments you selected in Logic.
Only problem I had was that this pushed the CPU pretty hard -- evidently a common issue when you use software instruments in Live Mode. I was getting dropouts and clicks. I solved this by switching from EXS instruments on each track to corresponding GarageBand instruments, which use less CPU power. Still sounds a lot better than the QuickTime instruments you are normally stuck with in BIAB.
Easier than it sounds. Give it a try. Good luck.
gb

Can you use midi sounds when recording videos on Photobooth?

Can you use midi sounds when recording videos on Photobooth?
Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
Is there ANY way this is possible?
HELP PLEASE!
Thanks!

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

Using Logic sounds for input and playback in Sibeius

Hi. I've been running Sibelius and Logic on different PC's, and just for fun, I installed Sibelius on my Mac today. I used my Master Keyboard to play in a test song.
So now I'm wondering whether I can use Logic sounds for inputtting AND for playback. Since I also have VSL on the mac, I don't really want to install the GPO which I use on my Pc with Sibelius.
Thanks, Kay.

Have you think using IAC ? I.e you set it as a "Midi Out" port in Sibelius so the midi will carry the data to Logic and trigger its Instruments via the virtual midi cables ( the IAC bus ).
Take care to select Software Instruments tracks only. If you select some track which use say Multi, Standard or Mapped Insr. ( which port is set to IAC by chance ) you will cause midi feedback and crash the Logic app.
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]

Can i use purchased sound effects off iTunes in an iOS app? - copyright issue

basically I'm making an iOS app, and i need a sound effect that i purchased off the iTunes store, aka from some company. Can i use this sound effect in my app without being sued a lot of money? If i payed for the file i should be okay correct?

Hello Aidan,
Here is the statement from the Terms and Conditions of the iTunes Store:
"You shall be authorized to use iTunes Products only for personal, noncommercial use."
We do not give legal advice on this Forum, but I think the statement is pretty clear.

Can you use logic express on a mac mini for recording

Can i use logic exprees on a mac mini for recording? Ive seen alot of 8,12, and 16 track recorders with a cd burner and it seems like a logical and more productive gues for me to buy a macmini for the same thing of recording and then I can uses logic express, a far better program for recording. can the mac mini handle the load of processing tracks and how much ram should I uses? thanks tim

sorry, I'd like to butt in here:
I would like to do the same thing, so I am curious about this forum and rather than starting a new one, can I get some advice on this possibility:
Mac Mini
1.83GHz Intel Core Duo
2GB 667 DDR2 SDRAM - 2x1GB
80GB Serial ATA drive
Glyph External HD 250 Gig
Mackie Onyx 1620 w/Firewire
Logic Pro 7.2
thoughts?
The most number of tracks I could see at once would be 16.
Here is something I am most curious about...
Firewire Hard drive
Firewire Interface/mixer
Firewire camera for FCP
to much firewire?
Please let me know if you have other thoughts aswell...
Shuke
thanks guys, this forum is fantastic!

Can I use Logic Pro 9.1.6 on two computers with one licens

I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

Hi, is the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

Can we use logical Operator in C:When tag of JSTL

Hi,
I am developing an application in JSTL.
I am using c:when tag. I have question whether can we use Logical OR operator in JSTL.
I have tried using the following Syntax: The two bean fields have the value DISABLED
<c:set var="testval" value = "${bean.val}" />
<c:set var="testvalue" value ="${bean.value}" />
Ex: <c:when test="${testval eq 'DISABLED'} or ${testvalue eq 'DISABLED'}">
Ex: <c:when test="${(testval eq 'DISABLED') or (testvalue eq 'DISABLED')}">
Ex: <c:when test="${testval eq 'DISABLED' or testvalue eq 'DISABLED'}">
retrieving both these values from bean.
The following syntaxes did not work.
Please give me some pointers to resolve the issue.
Thanks,
Ravi
Edited by: user10977303 on Nov 17, 2010 9:05 AM
Edited by: user10977303 on Nov 17, 2010 9:10 AM

The entire expression including the 'or' has to be inside the ${}.
What this has to do with error handling beats me.

"Can I use Logic Pro in my new imac with 2.66 intel core 2 duo"

Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
I have a 002 rack from digidesign, that should be good running with a logic pro 8 DAW.

Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
Yes. Click here for more information.
(40435)

Can I use logical databases in a WebDynpro ABAP program?

can I use logical databases in a WebDynpro ABAP program?
I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee). So it seems that the existing logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

Hello, Tiberiu.
You cannot use LDB directly within your WDA programa. BUT, you can fetch results from this LDB by using FM LDB_PROCESS. This function module can be called anytime from any kind of ABAP program. But you will still have to create the screen, as it only processes data, not screens.
Regards,
Andre
PS: Pls reward points if it helps.

Can I use logical databases in a WebDynpro for ABAP program?

can I use logical databases in a WebDynpro ABAP program?
I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee). So it seems that the exisinting logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

Hi
Please let me also know the solution to this. I am a beginner to WebDynpro and want to know if I can make use of LDB's as we do in our normal HR programming do develop a WDA in HR.
Thanks and regards,
Uma.

Hello! Can i use logic pro x with mbox 2 ?

Hello! Can i use logic pro x with mbox ?

Yes, I´m quite sure you can, go here:
http://avid.force.com/pkb/articles/download/Mbox-2-Drivers
Haven't fully tested it myself, but have a go.

Can you use surround sound 5.1home theatre systems with iMac 27"?

Can you use surround sound 5.1 home theatre systems with iMac 27"? I was thinking of using my iMac as an internet television as well as home pc. thanks

NZane-
Greetings and welcome to the Apple boards.
The Mac puts out encoded 5.1. It is the function of the amplifier, receiver or decoder to take that signal and turn it into something useful. At minimum you will need a device that can accept that output and turn it into something useful.
Most studios that I am familiar with want to be able to use their own 5.1 decoder, amp and speakers. Juicier sound!
Luck-
-DaddyPaycheck

Solution manager can be used as repository DB with out-of-box integration?

Solution manager can be used as repository DB with out-of-box integration?
Hi ,
In Our Global SAP Environment, We are looking to use solution manager as a CMDB ( Config management DB) , which is kind of repository DB where it needs to keep track of infrastructure components .
A CMDB about Host consists of elements like
No. of CPUs,
RAM size,
...etc
For example in solman SMSY , you get some information about the SAP Host .
we have multiple CMDB systems , each one for our supplier .
For example Host hardware () CMDB is managed by Vendor1,
Storage CMDB by vendor 2 , and we need to join the both information , in order to get the Full elements of the Host .
A host information spread across the Multiple Vendor CMDBs.
Now we want to use solman as single CMDB, where Solman keeps track of some data , and needs to get some additional data from vendor1 by connecting into
their DB using the username/password ..etc
Does the solman has this Out-of-box functionality?
Thanks
Vasu .

Hi - smilar question
If we setup the system monitoring using solution manager , can we able see the TCodes & their screens from solman .
For example Can I able to control my ECC screens (SCC4, RZ10,SMLG,SALE,SPAD,SM59,.... ) from Solution manager ?
waiting for the reply .
Thanks
Vasu

Can I use Logic ESX 24 sounds for Band In A Box?

Hi,
This is probably a Band In A Box question - however - it does have to deal with Logic. Perhaps someone can show me where to look online - or just answer the question:
Do you know if there is a way to use Logic ESX 24 sounds in place of the dinky sounds that come with Band In A Box?
Thanks!

hear is another thought. could you use the staff in GB to position the chords as you want them? you would not have to play them. you can move the on the staff so that they play the note you wanted.
i don't know. i was just trying to give you some suggestions. biab seems really cool, and if it does what you need then that is awesome, but i don't think you will get exs24 instruments into it. you might be able to, but for the time it will take you you probably could just play the chords.
will logic's score not let you enter in the desired chords? i do not use logic's score, but it seems like you could just create an arrangement by dragging notes/chords to the desired position without playing a note.

Can I use Logic sounds in Band In A Box?

Similar Messages

Maybe you are looking for