Can I use MAC OS 10.5.8 and MAC OS 9.2 at the same time?

Can I use to an ibook G4 using MAC OS 10.5.8 the MAC OS 9.2(classic environment) in order to run an application that runs in classic encironment? I have a desktop G4 that runs 10.3 and it is possible to run on this MAC. Can I do the same to the ibook using 10.5.8?

The easiest way to have Classic on an iBook g4.
1.     Install 10.4 and update to 10.4.11.
2.    Copy an existing Mac OS9 System folder to the hard drive.
3.    Open System Preferences and click Classic.
4.     Select the preferences you desire.

Similar Messages

Is it possible to use Airport Express as a repeater and as an airplay device at the same time?

Hi,
I am using airplay with airport express stations in combination with conventional speakers for my home entertainment. Works great. Only thing is that I have a massive block of concrete in my flat. Is it possible to use one of my express stations as a repeater and at the same time as a streaming device for airplay? Thanks!

Sure it works only with apple routers? Cause than I could stop trying.
Yes, it's proprietary like everything else Apple. You could look at this:
http://www.amazon.co.uk/dp/B006BBYXPA/?tag=hydra0b-21&hvadid=9550946469&ref=asc_ df_B006BBYXPA
I have had great success installing these for BT Home Hubs and VM Superhubs.
@JoeMY - If it is "joined" to the FritzBox then it won't work, it only works with Apple routers connected via Ethernet or as the main router.

Use TC as a wireless client and as ethernet switch hub at the same time?

Hi!
I have a wireless DSL-modem downstairs and my office upstairs. Since I use the TC-USB Port for my printer (to share it to my family as well) my TC is located in the office, close to the printer. Thus TC has to be configured as a wireless client and everything works fine so far,........but: When I add music (stored on TC) to my iTunes library, everything is soooo sloooow! Copying files using the route iMAC ---> DSL-modem/router ----> TC .... so sloooooow!
Is there any way to use the ethernet ports while TC is a wireless client?
Whenever I connect my iMac via ethernet using my current setup, it doesn't get an IP address from TC (obviously because there is no DHCP service active???). When I disable my Airport on the iMac, all connections are off-line.
Pls. help or advise!
Thx. Hannes

Thanks for the response.
Everything works fine if I use your suggested setup but I need the TC in the office, and the DSL modem downstairs. An ethernet connection is not possible this way, and the printer in the living room isn't really a nice piece of furniture
I think, there is no possibility to use the wireless as uplink and the TC as a router/DHCP-server...
Probably I need a server computer to handle the connection between the wireless LAN created by the DSL modem and an ethernet network managed by the TC.
Hopefully someone has an idea/solution that fixes my problem.
meanwhile I keep looking......

How can I use both high def (16:9) and regular def (4:3) in the same video?

I'm editing a load of video, some of it was shot in 16:9 high-def and some in 4:3 regular-def. Id really hate to see the 4:3 footage go to waste. What can I tack on to the black sidebars on either end of this footage to fill in the gaps? I've also seen on TV where the sidebars on old 4:3 footage is blurred out by video from that particular frame. How can I do this?

Just duplicate the footage and superimpose.
Stretch the underlaying footage to fill the screen and add a blur.

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Welcome to the Apple Community Lschaef5318.
You need one Apple TV for each TV.

I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

I just found the solution!
Niel
Re: Why is my Finder window popping up when I open my Safari window?
Jan 20, 2008 7:58 PM (in response to alak)
Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252)
iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

Can i connect the printer to a wireless network and a usb computer conneconnection at the same time

Can I connect my Officejet Pro 8600 by Usb and wireless at the same time, I have a very slow Network at this time.

Hello gilldenc
To answer you question yes. You can have one computer attached via USB and to a wireless router at the same time. What router are you using? Is it your internet connection that is slow? Usually your internal home network is much faster than your internet speed.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time.

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
GB

I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

Hi,
Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
cheers

Can an Airport extend a wireless network and support a USB printer at the same time?

Can an Airport extend a wireless network and support a USB printer at the same time?

Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

Can a mac mini be set up to run two separate users at the same time?

I work for a middle school and we need to purchase 20 computers that will just be used to run internet apps. Though we have all Macs, we don't have a big budget and for this one use only, we are condsidering purchasing inexpensive HP all-in-ones for about $450 each. However, I was wondering if a Mac Mini can be first set up with 2 partitions, install the OS on both partitions, then run two different users, with two separate monitors and keyboards, at the same time? This way, instead of purchasing 20 Windows computers, we could purchase 10 Mac Mini's (and displays) and save money, and still be supporting just one OS throughout the campus.

If you setup a server, as in the Mac OS X Server Installation, pages 23ff show configurations, you can have multiple users, but they must all have computers. Some installations can be done with dumb terminals but that is not what you seem to want. Unix machines do have a multiple simultaneous user capability but you still have to have a computer for each user, again, not what you seem to want to do. Right now there are two other users logged in on my Sun workstation on the desk behind me...they are logged in because I permit them to do so.
And last night for an experiment I connected my iMac and MBP by ethernet wire, logged in on the iMac, then logged in on the MBP and from there on the iMac...but I set up the network to permit that and then disabled it again. You can create security holes doing things like this.
As dwb points out switching from Apple to PC equipment is a false economy that lures in administrators. In our county school system we had a superintendent who hired a good friend...who had PC-industry ties. Decided to remove all Apple equipment from the elementary schools and switch to PCs. It wasn't long before they ended up going on a 4-year cycle of "refreshing" the equipment, i.e., completely replacing all hardware in every school on a four year cycle. Since my wife was a Media Specialist, aka librarian, and responsible for technology in her school, every four years she had to develop a complete school map of where each teacher wanted the computers in their classrooms, complicated by where the technicians predetermined the locations of the network wire drops, of course. then teachers get shuffled over the summer and all the plans are for naught.
Anyway, there really isn't a solution to your problem except to buy a large number of computers and let each student use one and have them networked to a server, print server, printers, etc. This is not inexpensive and cutting corners will only cause headaches for you.

Can I use both ePrint and AirPrint on an HP4630 at the same time

I have an HP4630 printer that I wish to use with an iPad and Mac Notebook (PowerPC running OS X 10.5.8) and want to know if I can run AirPrint for iPad and ePrint for Mac Notebook at the sametime.
I understand that Mac Notebook can not connect to the printer over the network because it is not capable of running OS X 10.6 and above.
I appreciate your help.
This question was solved.
View Solution.

Hello Chesher5,
Welcome to the HP Support Forums!
Regarding the inquiry into ePrint and AirPrint for the Officejet 4630, yes they can be both used at the same time. They are completely separate means of printing. Both require a network connection though.
If you have any problems setting up or using either, please let me know and I'll do my best to assist.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

Hi Gurus:
Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
Please let me know as this impacts a lot of my development....! Thanks....
Best...... ShruMaa
PS: I had posted this in "BI Extractors" forum but there has been no response...... Hope to get some response.......! Thanks

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

Can i use a bluetooth headphone and a bluetooth cycle computer at the same time on a 4s?

I was wanting to get the wahoo bluetooth enabled cycle computer and heart rate monitor and use it at the same time as I use bluebird bluebuds bluetooth head phones. Does this many divices work at the same time?

No, you can connect only one bluetooth device at a time.

Can I use MAC OS 10.5.8 and MAC OS 9.2 at the same time?

Similar Messages

Maybe you are looking for