Can I use MainStage 2 with Logic Express 9.1.6

Is it possible to use MainStage 2 with Logic Express 9.1.6.?  Are there any limitations to not having Logic Pro 9.  I'm very happy with LE9.1.6. as it meets all my needs (perhaps with the exception of not having Space Designer) but if I need to upgrade to get the most out of MainStage 2 then I will.
Thanks.

Actually I have found a way for at least the instrument plug ins to be accessed.
I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
If not already installed, get SoundFlower. After installing it.
A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
C) Press RECORD and start playing, LE captures Mainstage's sound.
I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

Similar Messages

  • CAN ANYONE HELP ME WITH LOGIC EXPRESS 7

    I have just installed logic express 7 on my mac but for some reason none of the MIDI sounds are playing back through my speakers after i have made them in the matrix edit window. i know the program is playing the MIDI sounds because it is showing there is a signal in the tarck mixer window yet on on the transport bar it says there is no MIDI output, does anyone.
    The same problem is occuring in my copy of cubase aswell which leads me to believe that there may be a problem with the MIDI settings on my mac,
    ive tried everything i can think of to get it to work but its no good,
    CAN ANYONE HELP ME
    Much apreciated
    armadacd55

    Tom, some preliminary questions:
    Have you gone through the Audio MIDI setup utility (not in Logic, in /Applications/Utilities) and set up your devices?
    What are you using for an audio interface, a third-party interface (PCI card, USB or Firewire) or the Mac's built-in audio?
    What are you trying to use to generate sound from the MIDI data - a soft-synth, the EXSP24 sample player, a Quicktime instrument, or an external sound module?

  • Using MainStage with multiple MIDI inputs (two keyboards!)

    Hi Guys,
    I use two keyboards for my live gigs, and am thinking about moving all my sounds over to MainStage. Most of my recording uses Native Instruments and Logic's standard AU instruments, and then I have to find similar sounds on my Korg and Kurzweil for live...
    My question is... can you use MainStage with two MIDI controllers? I'd obviously want to set up the presets in MainStage so that there are different instruments being controlled by each synth.
    Would love any advice on whether this can be done, and a quick pointer as to how...
    Thanks heaps in advance,
    Mike

    Easily done (I'm using two USB controllers on a gig now). Just set them up in Layout mode, then be sure to select the input of choice for your specific channel strip(s) in each patch. Or of course you can set things up at the set or concert level as well.

  • Control surfaces with Logic Express

    hello all
    Im new to MAc , completely new having been PC since the year dot...Having used Cubase since atari days I have a Steinberg Houston Controller surface. Anyone know if it is possible to use it with Logic Express before I spend £150 on the programe please??

    Hi,
    nope, the surface wouldn't work natively on a Mac. You can only use it's MIDI features and remap the controls to functions in Logic. As long as the interface sends MIDI, this will work, but there won't be any access to the special features i guess. Guess why? Steinberg wouldn't want to provide a driver for another DAW than Cubase. Sneaky little ones they are...
    But you can try to sell it through ebay.
    Fox

  • Can Logic Pro 7 Plugins be used with Logic Express

    Hello, does anyone know if you can use the instrument plugins in Logic Pro 7 with Logic Express.

    The cool advanced features that are part of Logic Pro are embedded in the application and can't be used as plug-ins on other systems such as Express. For good reason, eh?

  • Can I use MainStage without owning Logic?

    I use Pro Tools and Reaper in the studio, so I won't to jump ship to Logic; simply b/c however nifty it is,  it's not worth the steep time-consuming learning curve.  However, for live performance as a keyboardist, I'm looking for a Mac-based VST host to be controlled by a USB/MIDI keyboard controller, and am wondering if  MainStage might be the way to go.  The price is so cheap, how could I go wrong?  But no matter where I search, I don't get a clear answer to these questions:
    Can I use MainStage without owning Logic?
    For a $29 download, does MainStage also come with all the content (sounds, etc.) for its built-in instruments, or is it assuming you already have those b/c you presumably own Logic?
    This question may need its own separate thread, but: Ideally, my keyboard setups for a "concert" may need as many as five VSTs per song (e.g., custom samples in Kontakt, Wurly, B-3, piano, glockenspiel, whatever) spread out in various discrete layers across a keyboard.  Has anyone tested this more-complex and memory-taxing sort of a setup out in a live situation?
    Thanks for any insight,
    Peter

    SASPro wrote:
    Can I use MainStage without owning Logic?
    If you buy it from the AppStore, YES
    SASPro wrote:
    For a $29 download, does MainStage also come with all the content (sounds, etc.) for its built-in instruments, or is it assuming you already have those b/c you presumably own Logic?
    All the instrument and FX plugs are included, and a (massive) additional free download within the Mainstage application will get you all the extra content.
    SASPro wrote:
    This question may need its own separate thread, but: Ideally, my keyboard setups for a "concert" may need as many as five VSTs per song
    Caution: Logic/Mainstage will only work with Audio Unit (AU) plugins, NOT VST. Most 3rd party plugs are available as AU plugs, but you need to make sure you have installed them.
    SASPro wrote:
    Has anyone tested this more-complex and memory-taxing sort of a setup out in a live situation?
    Yes, and memory/CPU issues not withstanding, Mainstage generally works extremely well for this.
    CCT

  • Does mainstage work with logic express 9

    hi ,  do all the features and plug-ins work with logic express 9 or are some features disabled .
    or are they not compatible at all
    thanks

    I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
    THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
    GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
    REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
    DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
    SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
    WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
    GOOD LUCK EVERYONE.

  • How can I midi Roland TD-9 KX2 with Logic EXpress 9?

    Hello everyone,
    Here is my setup:
    I have the Roland TD-9 KX2 connected to M-Audio MIDI In & Out and Audio 1/4" In & Out, Then connected to Logic 9 thru USB on my MacBook Pro.
    I create a new track and select Audio and then I create another track and this time I choose External.
    When I hit record, the audio track shows waveform recorded but the External/MIDI does not.
    Note: When I'm recording, I can see the MIDI notes (look like little blocks), but when I stop recording, They disappear...
    Can someone please tell me how I can execute this or of if anyone has a tutorial that they can share link of it.
    Thanks in advance,

    I had a simular problem. Only I had Ver 9 and needed 9.1.4 to be compatable with Lion. I had installed Lion and didn't think I would have any problem with Apple apps. Not the case with Logic Express. Here is what I did.
    First: I removed all versions that were previously installed on my Mac Pro. Then using the latest (9.0) I reinstalled. Important. DO NOT TRY TO OPEN APP. Next: down load (free) version 9.1.4 and install. Once everything is closed and disks are removed. Start Logic Express 9.1.4 and guess what...if just works.
    I believe some of the residual files were residing in my library some place and I didn't see them. Before I reinstalled I was recieving the message that I didn't have a qualifing version of Logic Express. This is when I had two versions 9.0.0 and 9.0.1. Someone said to remove the older version, I didn and nothing.
    Do what I say above and you will be rewarded.
    Good Luck

  • Can I Use Oracle DB 11g Express Edition with Atomikos  Transactions.

    Hi,
    Any Help is appreciated.
    Im able to use Oracle 11g Standard/Enterprise Edition with Atomikos for XA transactions.(XADMS).
    My question is Can I Use Oracle DB 11g Express Edition with Atomikos for XA Transactions.
    Thanks,
    kensuser

    Hi,
    Thanks for the answer.What jdbc drivers should I use. Because still Im getting exception when using Oracle 11g XE.
    But the same application runs with Oracle 11g Standard/Enterprise Edition.
    Here is my Exception trace: Sorry, I'm a first time user, so pasting the exception as it is, will find out how to format the same, as use this forum. ant help is appreciated. Thanks in Advance
    SEVERE: Exception sending context initialized event to listener instance of class org.springframework.web.context.ContextLoaderListener
    org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'UIToolAdminkit': Invocation of init method failed; nested exception is com.atomikos.datasource.ResourceException: XA resource 'EXXADBMS': resume for XID '3139322E3136382E35352E31382E746D30303030313030313937:3139322E3136382E35352E31382E746D31' raised -3: the XA resource detected an internal error
         at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor.postProcessBeforeInitialization(InitDestroyAnnotationBeanPostProcessor.java:135)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsBeforeInitialization(AbstractAutowireCapableBeanFactory.java:393)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1437)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:518)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:455)
         at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294)
         at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225)
         at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291)
         at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193)
         at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:585)
         at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:913)
         at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464)
         at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:381)
         at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:283)
         at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:111)
         at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4206)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4705)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:840)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463)
         at org.apache.catalina.core.StandardService.start(StandardService.java:525)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:754)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:595)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414)
    Caused by: com.atomikos.datasource.ResourceException: XA resource 'EXXADBMS': resume for XID '3139322E3136382E35352E31382E746D30303030313030313937:3139322E3136382E35352E31382E746D31' raised -3: the XA resource detected an internal error
         at com.atomikos.datasource.xa.XAResourceTransaction.resume(XAResourceTransaction.java:500)
         at com.atomikos.datasource.xa.session.BranchEnlistedStateHandler.<init>(BranchEnlistedStateHandler.java:57)
         at com.atomikos.datasource.xa.session.NotInBranchStateHandler.checkEnlistBeforeUse(NotInBranchStateHandler.java:66)
         at com.atomikos.datasource.xa.session.TransactionContext.checkEnlistBeforeUse(TransactionContext.java:85)
         at com.atomikos.datasource.xa.session.SessionHandleState.notifyBeforeUse(SessionHandleState.java:176)
         at com.atomikos.jdbc.AtomikosConnectionProxy.enlist(AtomikosConnectionProxy.java:204)
         at com.atomikos.jdbc.AtomikosConnectionProxy.invoke(AtomikosConnectionProxy.java:138)
         at $Proxy13.prepareStatement(Unknown Source)
         at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
         at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
         at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
         at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1573)
         at org.hibernate.loader.Loader.doQuery(Loader.java:696)
         at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
         at org.hibernate.loader.Loader.doList(Loader.java:2228)
         at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2125)
         at org.hibernate.loader.Loader.list(Loader.java:2120)
         at org.hibernate.hql.classic.QueryTranslatorImpl.list(QueryTranslatorImpl.java:935)
         at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:196)
         at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1148)
         at org.hibernate.impl.QueryImpl.list(QueryImpl.java:102)
         at org.springframework.orm.hibernate3.HibernateTemplate$30.doInHibernate(HibernateTemplate.java:921)
         at org.springframework.orm.hibernate3.HibernateTemplate$30.doInHibernate(HibernateTemplate.java:1)
         at org.springframework.orm.hibernate3.HibernateTemplate.doExecute(HibernateTemplate.java:406)
         at org.springframework.orm.hibernate3.HibernateTemplate.executeWithNativeSession(HibernateTemplate.java:374)
         at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:912)
         at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:904)
         at com.kensho.common.UIbundlDAOImpl.findAll(UIbundlDAOImpl.java:13)
         at com.kensho.common.UIbundlDAOImpl$$FastClassByCGLIB$$6f2db14b.invoke(<generated>)
         at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:191)
         at org.springframework.aop.framework.Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:689)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)
         at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
         at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:622)
         at com.kensho.common.UIbundlDAOImpl$$EnhancerByCGLIB$$8797972a.findAll(<generated>)
         at com.kensho.common.UIToolKitAdminBBean.getAllBundleItems(UIToolKitAdminBBean.java:37)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor$LifecycleElement.invoke(InitDestroyAnnotationBeanPostProcessor.java:346)
         at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor$LifecycleMetadata.invokeInitMethods(InitDestroyAnnotationBeanPostProcessor.java:299)
         at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor.postProcessBeforeInitialization(InitDestroyAnnotationBeanPostProcessor.java:132)
         ... 29 more

  • Sync microKorg with Logic Express 9

    I'm trying to sync the arpeggiator of my microKorg XL with Logic Express 9, using Logic as the master. I seem to have almost done it, in that tempo changes in Logic change the microKorg's tempo. However, I can only hear the microKorg whilst I'm either recording or playing back - I can't hear it if I press a few keys.
    I think the problem lies in that I have "Local off" set in accordance with the microKorg manual. The manual says I should also "turn on echo back" on the computer - but I don't know how to do this in Logic Express.
    Grateful for advice.

    When you set "Local Off" in any synth with MIDI capability, it disconnects synth's keyboard from its sound engine. Switch it back ON to be able to play sounds again using microKorg's keyboard. There is no point to disable the keyboard in your case anyways. Unless of course, you want to avoid midi-loop (but that's only when you have both MIDI IN and MIDI OUT wired to Logic).

  • Syncing Fast Track Ultra (Slave) With Logic Express (Master)

    I'm trying to get my fast track to slave with Logic Express, using Logic as the master. It doesn't appear to be sending out any messages. On my fast track I can get the midi 'in' light to blink but not the 'out.' in Logic, the transport bar on the bottom, says 'no midi' for both the in and the out. Does this sound like a Logic setup issue or a fast track ultra setup issue?

    Hi,
    1st: You need to set your drum machine clock to external. That's important if you want to make Logic the master. Be aware any clock signal only is available when Logic is in play mode (naturally, but sometimes i forget even the most logical things).
    2nd: In the Audio-Midi-Setup, the Fast Track should be displayed. Open the MIDI window (Window-> show MIDI window). Click on the "add device" icon. A new device will be added (new external device). Now open the inspector for this new device. You can name it, adjust all these things like MIDI clock send/receive and other gizmos and give it a nice icon. Now you must "connect" this new device with you Fast track by simpy dragging a line from it's outputs to the Fast track input and vice versa. The MIDI setup window will now represent your hardware's cabeling.
    Once you have done this correctly, you should be able to correctly select the Drum machine in Logic.
    Fox

  • Set-up Roland Octapad 2 with Logic Express 8

    Is anyone familiar with how to set up the Roland Octapad 2 Pad-80 with Logic Express 8. I want to use it as a midi controller for some drum samples I have (not general midi drums). But like Addictive Drums or BFD Lite. I have it connected with an edirol e-mux 1x1 interface. But when I hit the pads there is no response. I have it set up in the Audio Midi set up. Are there settings within the Octapad I need to change? I've spent two hours trying to get it to respond and it's becoming a pain in the arse.
    Thanks for any help.

    Logic has a built-in midi monitor in the transport bar. When you hit the pads, are you seeing notes listed there?
    The Octapad's model was "pad-80", and there's a manual available on the web - http://www.scribd.com/doc/8356768/ Roland-Octapad-II-PAD80OM. If you're seeing midi notes show up and can't change the settings in Addictive Drums to match them, you're going to have to change the notes on the pad -- which will probably be more difficult than doing it in the software.

  • I have East/West Symphony.  Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

    I have East/West Symphony. 
    Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
    Also, would it work with Garageband??

    Thanks-that's the same driver I'm using now.
    The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
    They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
    Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
    Thanks very much for the response, it helps me get beyond this phase.
    Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

  • Using mainstage with two instruments at the same time

    Hi, I'm using an M-Audio firewire solo as an interface with my macbook.  I have a usb keyboard and want to play guitar as well, switching between the two onstage.  My question is, how do I get the outputs to the soundboard so they can be mixed separately?  The interface has two inputs and balanced outputs (ch1 and ch2).  I want channel 1 (gtr) to go to ch1 of the output and channel 2 (keys) to go to ch2 of the output so they can be mixed to the front of house and monitor mixes.  Is this even possible using mainstage or logic, or even by just using the headphone out on the macbook?

    Since MainStage only deals with outputs in stereo.  You'll need to do some panning.  Pan your Guitar fully LEFT, and your keys fully RIGHT.  That'll give you two separate outputs.... 
    FYI, there are some issues with panning in MainStage 2.  So, to get around this....  Create two Sub Aux channels.  One called Guitar Out, and the other Keys Out.  Do your panning there and not on the individual channels.  And send channel one to the Guitar Out Aux, and the Keys to Keys Out Aux.

  • Connecting Interface and recoding with Logic Express 9

    Hi apologies if I've posted this in the wrong location. I need some help.
    I have just bought an iMac (with Logic express 9) along with a focusrite saffire pro 14 sound interface.
    i'm having difficulties getting a line in and out of the focusrite and into logic.
    I currently have passive monitors plugged into an amp, which is then plugged into the headphone jack on the iMac, the focusrite is connected via firewire.
    my mic is connected via xlr with phantom power into the focusrite, and my guitar (via an effect unit with built in pre-amp) is connected into the 1/4'' input. both signals are showing levels on the focusrite mixer software - but no sound. the only output from the sound interface is the firewire.
    I can record, and play back in logic using my usb midi controller- USB direct into the iMac.
    i've selected the focusrite as the driver in logic, also as the input device in system preferences on the iMac.
    any ideas when I am doing wrong?
    any help would be good
    thanks
    Chris

    Hi,
    there are some points where the big bear trap might have snapped onto your feet
    First: You said you have selected the focusrite as the core audio input device in Logic. This is okay. But have you selected the correct inputs for the audio tracks you are recording to? You focusrite has 4 possible line inputs (1 and 2 are combined on the front in the middle of the XLR jacks, which are also inputs 1 and 2 for mics, and 3 and 4 are on the back).
    When you connect a headphone to your focusrite, can you hear your mic or your guitar? (turn up the monitor volume as well as the headphones volume!)
    Given you really have a good signal that goes into your focusrite, the same signal should be available in Logic *for the appropriate inputs* . It won't work if you have plugged your guitar into input 3 and have input 1 or 2 selected in the channelstrip's input selector tab.
    Second: Given there's a signal coming into Logic, where does it go from there? The focusrite has 4 outputs, and you should connect your amp&speakers to them. If your amp&speakers are still connected to your iMac's headphone jack, you must select your Mac's "built in output" as the output device in Logic. The OS X preference pane has nothing to do with Logic's preferences. Don't confuse them.
    Cheers,
    Fox

Maybe you are looking for

  • Tips & Tricks On Iphone 5s 7 Iphone 5c

    Hi My Name Is Anthony So Today Im Going To show You Some Tips On your Phone I Like doing This Because One Day I wanna work at Apple So lets Do This!                         First Tip: Turn Off Bluetooth when you dont need it                          

  • PE7 Could it be ??????????

    I wonder if the file browser will re-appear in this version(PE7)? I am so tired of opening the "bridge" in CS3, to edit images, only to have CS3 bog down and crash. Out with the install Cd, repair the corrupted files, and so on...I always fall back t

  • Color space and profiles clarifications

    Does FCPX consider the embedded color profile of my clips ? What is the default color space of FCPX projects ? (if any) Can I select a specific color profile for my projects ? My clips (according to after effect_cs6>interpret footage>color management

  • 'External process-0130' Inspection in QM?

    Hi Team, Requesting your valuable help for below scenario. Step 1: Receiving the material(M1) in GR stage from 'vendor1' - 01 inspection active with one operation(op10-Visual inspection) in Inspection plan .If material ok it should be sent to Externa

  • Every time I start Firefox it repeats the add-on compatibility check

    I understand the need to check compatibility with newer versions of Firefox. But in my installation (FF4) , it performs this check EVERY time I start up Firefox, and - as the message says - it takes several minutes. After this check, everything works