Can I use media buttons for Winamp on my Satellite A100?
Hi!
is it possible, that i can use the media buttons (play, stop, next, forward, ...) also for winamp or other players except windows media player???
I have Satellite A100 - 188.
Thx!
Dave
Hello Dave
As far as I know it is not possible. I have tried it with older notebook models but without success. It works just with Microsoft Media player.
For a long time ago Toshiba has had a small player installed on a few units (dont remember which notebook models) and it was possible to use them with this Toshiba designed player.
Bye
Similar Messages
-
If I use itunes store to purchase content, can I use media players like winamp to play them or am I restricted to using itunes only?
If you buy a Canadian iTunes cards and will have a Canadian mailing address you can use to set up a new account in the iTunes Store there, yes. Note that you will not be allowed to use the Canadian iTunes Store once you return to the US, though any content you purchased will still work.
Regards. -
I accidentally pressed the button on facetime where you can't use that email for facetime..... if i restore it will my facetime work??
Try the forum for the device or computer
-
HI,
I have SharePoint Online 2013 environment, i have created a external content type from wcf service. I want to use this as External Data column in document library. When i look for values in content type it populates and when i click any values and adds and
then click saves it shows the below error
No exact match was found. Click the item(s) that
did not resolve for more options. You can also use Select button to choose External Data
__fkc000950056003700kc000950056003700kc000e400f2001400kc000950056003700k830035004700160027004700d20057000700020064009600870056004600:
No Matching Items
Please help on this.
varinderI don't understand the question exactly, could you restate it. Sorry mate, I might just be braindead.
But, as far as the issue, it is by design. the column is a lookup columns which essentially ties to the external data. if that data is removed, the column on your simple list becomes invalid and any edits of the simple list item will require
it to be changed.
are you wanting to make the ECT read only? that's simple enough. you can pop open SPD and edit the ECT, then remove the C/E/D operations (create/update/delete). That will not, however make it read-only in any other systems that access that
external data, as I assume its not just SP or else it wouldn't be external
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com -
Satellite A300 and WIn7 - cannot use media buttons
I have Satellite A300 laptop.
Recently I reinstalled my Windows 7 Pro x64 using update option (not clean install). So I kept my program and settings. However the media player panel (or whatever it is called) that lets me play, stop music, change songs etc. is not fully working. I can't use 2 "buttons": one that lets me turn on/off highlighting and the other one that turns media player on.
I need them working. I tired Toshiba button support, but I don't know what to do there.Hello
What you must install is Toshiba Value Added Package. I use Win7 on my A300 and all buttons work perfectly. But I use 32bit version.
I dont know if your A300 is supported for Win7 64 bit but you can try to use THIS version.
Before you start installation remove old version, if exist, restart notebook and install this version.
I hope this will help you. -
How can I use jbo:InputSelect for a char type filed?
How can I use <jbo:InputSelect for a char type filed?
I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
There is a problem:
If I use (in the "DataEditComponent.jsp" file)
<jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.If I were in your shoes, here's how I would do it:
<%-- Assuming you have dsRoom and dsResponsibility --%>
<%-- Select is an HTML tag --%>
<select name="ROOM" size="1">
<% char roomID =""; // Init your character var
// Open a rowsetIterator to get the records and add them to the LOV
<jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
<% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
// add the value to the LOV
%>
<option value="<%=roomID%>"><%=roomID%></option>
</jbo:RowsetIterate>
</select>
If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
//Set the current record's char
char curRecord = (char)rowEdit.getAttribute("ROOM");
// inside the iterate:
if (curRecord == roomID) {
<option value="<%=roomID%>" selected><%=roomID%></option>
} else {
<option value="<%=roomID%>" ><%=roomID%></option>
Hope that helps! -
Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx
On the iPad open Settings/iCloud and delete the account using the button at the bottom. Once deleted log in using the other account. For iTunes Stores use Settings/iTunes & Apps Stores, tapp on the Apple ID at the top then sign out. Once done sign in using the other account. Once you are happy with the changes plug your iPad into your computer to update the backup.
-
Can't find i button for World Clock of Dashboard widget
Can't find i button for World Clock of Dashboard widget to change the City.
Hi ogawam,
in my clock there is no i nor sydney.
Sydney is my city (Time Zone). What city does your clock show?
Try this:
System Preferences > Language and Text > Region
What does it show?
Regards,
Ian.
Message was edited by: Yellowbox. I am using MacBook Pro, OS X Mountain Lion 10.8.3 -
Can i use time capsule for back up my movies and watching them with my bravia tv
can i use time capsule for back up my movies and watching them with my bravia tv.
i mean can i use this for external hard disk drive to back up my movies and watching them with tv that has a lan port or wi-fi technology.Only if the TV is a media player.. the TC is dumb as a board router with a hard disk.. there is no DLNA which I suspect the TV requires.. you can get a player like the WDLive and it will play movie files from the TC to the TV.. remember the TC is nothing but a file store.. no servers .. no nothing.
-
Can I use one account for both my labtop and my ho...
can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
Can I use touch ID for App Store without using a passcode?
It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??
From the article:
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting
and
You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
Regards, -
HT3354 how can i use one table for reference to another
how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using
you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware -
Can I use same account for android and PC and how ...
Can I use same account for android tablet and PC and how do I link both?
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
Maybe you are looking for
-
I am trying to batch convert cr2 to jpg. in bridge i go tools>ps>image processor and it returns a message "Image Processor.jsx could not be found." I updated cc to no avail. i am on mac 10.7.5
-
New Macbook Pro Connects to Network but not to Internet
I just got a new Macbook pro and I transferred everything from my old macbook pro from a timemachine backup. The internet works fine on my old macbook pro (running 10.5.8) but if I turn on the airport in my new macbook neither machine can connect to
-
How to block the link opening from other browsers
Hi, I am evaluating Microsoft Intune to manage mobile devices. I have created Managed browser policy and deployed to MDM users and it's working well. I have restricted copy/paste for our o365 sharepoint link and it's working well in managed browser.
-
Following a tutorial and no global.css
Hello all. I'm following the "page layout tutorial" in The Missing Manual for DW CS3. I'm at the section, 'Applying Some Style' (page 357). At this point, I am going to create new styles to format my new page (because it's a pre-made layout)- change
-
Patterns/pattern overlay grayed out! Help please
I deleted the default patterns because I was about to add all the patterns from Subtle Patterns, but now the entire patterns option is grayed out in the menus and I can't do anything! I'm a web designer, so I need this to work. Can someone please hel