Can I use motion 5 and Compressor with Final Cut Pro 7?

Hi, Guys and Girls:
After reading a lot about the new Final Cut X I decided not to buy it. I´m not gonna say anything about it, pretty much everything has been said so there´s no point in being redundant about it.
So my question is this:
Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?
I heard the new version of Motion is nice, not so sure about the new Compressor but any improvement would be nice.
Thanks in advance.
Daniel Sametz.

Anyone?
Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?

Similar Messages

  • I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

      I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

    My HVR-A1U was able to capture just fine.  The only issue I had is that it has mroe frequently than FCP 7 ever did find Timecode breaks and split my clip apart.  I never had breaks before, so while it is possible I had them on this latest tape, I think X is just more picky.  I mean heck, it found three in a one minute timeframe.  My A1U worked with X without me needing to adjsut any settings form how I had it setup for 7.

  • Can I use a blue screen with Final Cut Pro X?

    Hi, I am at a school that uses Macbooks and has just purchased a blue screen (with lighting).  I am new at chromakey / blue screening.  I know that you can use iMovie for green screens, but could somebody please tell me what is a good software to use for a blue screen?  Does Final Cut Pro X work with blue screens?
    If anyone has any advice I would be very grateful!!
    Thanks,
    From Michelle.

    The keyer effect in FCPX works very well with blue screen. Open effects browser and look for Keyer. When you add it to your blue screen clip it will automatically pick up the blue screen and key it out. You also have several controls to fine tune the edges etc.

  • Panasonic camcorder HDC-TM90 any experience using Pavtube Video Converter with Final Cut Pro X

    Does anyone have any experience using Pavtube Video Converter with Final Cut Pro X for Panasonic camcorder HDC-TM90 shooting in 1080 P 60 ( mts file extension)

    Don't use these generic offbrand converters to get footage into FCP X. they re-encode your video and cause loss of quality. If FCP X cannot import your video then use a utility that simply re-wraps it into a quicktime file with no transcoding or loss. I prefer Clipwrap which works great and is updated frequently but there are free alternatives like Media Converter or Rewrap.
    But version 10.04 of FCP X should import it directly from camera as long as the folder structure is complete and you are not trying to merely import it from single mts files.

  • Will Motion 5 work with Final Cut Pro 6?

    I have Final Cut Pro 6 and Motion 3.  Can I buy Motion 5 and use it seamlessly with FCP 6?

    https://discussions.apple.com/message/15509947#15509947

  • How can I automate log and capture in Final Cut Pro

    Does anyone know of a way to schedule the log and capture of video in Final Cut Pro with a script or software application, so that it doesn't have to be done manually?
    I am using a capture card in my Mac to record college lectures for our department and it's not always possible for me to be there to start the capture. Our lectures occur on a regular schedule.
    I am a new Mac user and I'm also new to Final Cut Studio 2. Thanks for any help on this topic!

    In Automator, all the apps you can automate are listed in the far left hand pane. Click on the QT Player icon there to see the "Actions" available for it. In that list you should see "New Video Capture" and "Start Capture". First drag "New Video Capture" to the big pane on the right, where you assemble your workflow. Then drag the "Start Capture" action beneath that. You're basically done.
    How to Save and Schedule this can be found in the Automator Help, when you search on "iCal":
    1. Choose File menu > Save As Plug-in.
    2. Choose iCal from the "Plug-in for" pop-up menu.
    3. Click Save. Automator opens iCal and creates an event that calls the workflow at the scheduled time.
    4. Name your event and set the date and time for the workflow to run using the pop-up menus in the info drawer.
    You'll need to do another "workflow" to Stop the recording. All you need is the "Stop Record" action in the workflow - then save the same way as listed above.
    Just note - I've used this process before and the QT movie generated, despite being recorded as "Camera Native" - was not editable in FCP. In fact, I don't even think I could import the final QT into FCP - let alone edit it. If editing's necessary maybe someone else can offer up another step to enable it. It was not necessary for my exact application, so I never explored it.
    Good luck.

  • Using cassette tape audio with Final Cut Pro & DV footage

    I am trying to use the audio from a cassette tape as part of a concert soundtrack. There were lots of sound problems during the concert, and afterward one of the sound guys gave me the audio cassettes he recorded of a church Christmas concert. I digitized the audio cassette using ProTools 7 at 48kHz and it sounds great. Problem is kind of what I anticipated - even if I synch a single note to absolute accuracy, the audio "drifts" out of synch where at the end of a 5 minute clip, the "end" is off by 47 frames. Even if I try and synch up shorter sections, there is still some drift.
    I have a soundtrack from my DSR-250; it was not possible to get a feed from the soundboard. I tried adjusting the speed/duration of the audio cassette track - everything lines up better; the sound is still off.
    Any hints, recommendations, advice would be greatly appreciated. Thanks.

    The reason behind not being able to sync the audio from the cassette with the video (thanks for the accurate answer, javabob!) is that audio cassette recorders are not speed controlled during recording or playback like video or DAT tape is. No tape will playback at the exact same speed twice do to many factors, including relative humidity, tape stretch, machine wear, etc. Which is why standard audio cassettes aren't generally used for this type of thing.
    -DH

  • LATINOS ARE SCREWED with final cut pro x. Everytime I use tildes like  á  for example. FCPX freezes and restarts.... really is a bummer. And on a side note, Color Curves? 3 Wheel Color Wheels? XML support? Can´t wait for multicam. God Bless!

    With final cut pro x. Every time I use tildes like  á  for example. FCPX freezes and restarts.... really is a bummer. PLZ FIX. Here in Colombia I can not use FCPX for projects which involve names or text. (ALL PROJECTS)
    And on a side note, Color Curves? 3 Wheel Color Wheels (color board is great, but i didnt read a 400 page book on 3 wheel color correction for nothing) ? XML support? Can´t wait for multicam. God Bless!
    FCPX IS GREAT. It really is. Just a few features are required.....

    w andrewfromjupiter wrote:
    Tildes can be both
    I think the idea that an acute accent can also be called a "tilde" is total nonsense.
    http://en.wikipedia.org/wiki/Tilde
    http://en.wikipedia.org/wiki/Acute_accent
    But good idea to report the bug here:
    http://www.apple.com/feedback/finalcutpro.html

  • I can't not transfer files in 'log and transfer' of Final Cut Pro. I recorded it in SD card using Nikon D7000 and JVC GY-HM100U.

    I can't not transfer files in 'log and transfer' of Final Cut Pro. I recorded it in SD card using Nikon D7000 and JVC GY-HM100U.
    I think I need plug-in.  Please let me know.  Thank you.

    Well, the Nikon D7000 footage cannot be logged and transferred.  There is no plugin for that like there is for the Canon cameras. Nikon never developed one.  So the footage from that camera will need to be converted with Compressor or MPEG STREAMCLIP.
    The JVC should work...what version of FCP are you on? 

  • I updated to yosemite os and was in the middle of a project with final cut pro 10.  Now it says final cut pro is incompatible.  How can I access my project and/or update final cut?

    I updated to yosemite os and was in the middle of a project with final cut pro 10.  Now it says final cut pro is incompatible.  How can I access my project and/or update final cut?

    There is this offer of a trial version FC Pro X with 30 day runtime:
    http://www.apple.com/final-cut-pro/trial/
    Too bad you didn't have a complete backup that could run the previous OS X
    and then you could resume using an earlier Final Cut Pro (10) or (7) since a
    clone would have been a means toward that position.
    http://www.apple.com/support/finalcutpro/
    http://www.apple.com/support/pro-apps/
    This appears to be another good reason to check out all the reasons why one
    would want or need to upgrade a working OS X version, since these kinds of
    events are known to happen as a direct result.
    Sorry to not have an answer to this, other than try & use the Trial version...
    Or see if someone at Apple sales/support can field your issue w/ an answer.
    Good luck & happy computing!

  • Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi Cereskit
    Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
    Vicki

  • TS1846 I have some troubles recently with Final Cut Pro 7 and would like to remove my preferences. I can't find any "com.apple.finalcutpro.plist" file from the Preferences folder but I do have some preferences.  So, where could be the file ?

    I have some troubles recently with Final Cut Pro 7 and would like to remove my preferences. I can't find any "com.apple.finalcutpro.plist" file from the Preferences folder but I do have some preferences.  So, where could be the file ?

    Digital Rebellion has you covered: http://www.digitalrebellion.com/prefman/

  • Can I use Final Cut Express 4 with Final Cut Pro 10

    Can I use Final Cut Express 4 with Final Cut Pro 10 on the same computer?
    Thank you,

    Yes, you can install both of them, but you can only have one open at a time.
    You can check this for yourself by downloading the free 30 day trial from
    http://www.apple.com/finalcutpro/trial/

  • Created project using Final Cut Express 4, can I open it with Final Cut Pro

    Created a short video using Final Cut Express 4, will my teacher be able to open this project up with Final Cut Pro???

    Depends on exactly which version of FCP your teacher is using.

  • Can you burn multible movies on one bluray dvd disc with final cut pro

    how to burn two completed quick time movies to blu ray dvd with final cut pro? Ive tried but wont play

    Mark,
    Welcome to the wild and wacky world of DVD's and Mpeg2!
    Here are a few things that might help.
    it seems to want everything as a QT. This presents size limitations.
    Not really, iDVD simply takes the QT files that you feed it and uses its own compressor to encode them to mpeg2 files. As long as your source material is not over 2 hours iDVD can handle it.
    I'm planning to export from fcp using Compressor in the hope of fitting everything onto one disc
    You can do this, but you might find it simpler to simply export a QT reference movie from FCP and drag that into DVDSP. DVDSP will then use compressor to create the mpeg2 files that you need. I say this because some find compressor a little intimidating at first. (I know that I still do.)
    Now, go find the manuals that came with your software and start reading, DVDSP is a powerful program and the manuals are the best place to start.
    Good luck!
    K

Maybe you are looking for

  • NetWeaver Portal and ERP 6.0: BI, ESS/MSS and full Portal on one machine

    Hello, with ERP 6.0 you need a EP Core Portal for BI Java. An other EP Core Portal for HCM ECC/MSS. The iViews from this portal you integrate in the main portal via federated portal. But in this scenario i need to much portals and have a lot of maint

  • Error On Attach File in Apex 4.0.2 And Oracle database 10.2.3.0

    hi all i using Apex 4.0.2 and Oracle database 10.2.0.3 i have Blob Item in table and i wanted upload a file to Blob Item . when i used Attach file button at the first saving connection failed and the second time successfully How can i Fixed this prob

  • How to fetch the payment details in to report

    Hi, I have the MIRo number, How to find the payment document number and check number so and so. What are the transactions like: F053,FB03. Let me know the process of payment after MIRO. What are the documents we need to raise, how to find those docum

  • Blackberry to Blackberry transfer

    Is there a way, via Bluetook, to do a Blackberry 8700 to Blackberry 8700 transfer of my address book?  I have to turn in my company BB and have purchased my personal BB.

  • Value references

    Hello, although I've looked through the numbers handbook, I can't seem to find a solution to my syntax error: I'd like to give my illustration students project grades from 1 to 6 (German system) based on their percentages. I'd tried using the numbers