Can I use multiple audio inputs in Flash Media Live Encoder?

This is the closet forum section to that program and I was wondering if there was any way to take the audio input from my capture card as well as a microphone and use those together at the same time.

FMLE will not directly mux audio connections from different sources. You could try possibly using a "Virtual Audio Cable", which is a outside program. Search Google for it.
If you want to have more control over what you broadcast, I suggest using a 3rd party program such as Telestream Wirecast, or Xsplit..
Xsplit is a realtively cheap alternative to Wirecast which is pricey.
Check them Out..

Similar Messages

Is it possible to use an IP camera as an input to Flash Media Live Encoder?

I am new to this forum so please pardon my ignorance....
I want to use my Sony IP camera (such as model SNC-RX550) as an input to the Flash Media Live Encoder, it that possible? If so, where would I go to get started please? Any help would be very much appreciated.
David

I would say NO. You would need a composit output from the camera to feed the video into the encoder. Since the IP camera doesn't do that it's not gonna work.

Audio problem on Flash Media Live Encoder

Hello,
Hope you are doing fine and having a great day. I will like to know how to capture audio from my laptop or desktop pc using the Flash Media Live Encoder. For example I'm running an automated radio software on the same laptop or desktop where I have running Flash Media Live Encoder, when I try to choose audio device it doesn't give me that option. Please need help in this issue.
Sincerely,
Jorge O.

FMLE will not directly mux audio connections from different sources. You could try possibly using a "Virtual Audio Cable", which is a outside program. Search Google for it.
If you want to have more control over what you broadcast, I suggest using a 3rd party program such as Telestream Wirecast, or Xsplit..
Xsplit is a realtively cheap alternative to Wirecast which is pricey.
Check them Out..

I can't see the preview of my source on Flash media live encoder ... I'm using CamTwist on mac

I can't see the preview of my source on Flash media live encoder ... I'm using CamTwist on mac

Carolyn,
I think your TV might be a rear projection model, correct? Those types of TVs inherently have overscan built into them as part of their optical design. The TV should have some picture SIZE settings that affect how much overscan is present, and some settings may even get rid of it altogether with the result there might be a small black border instead.
Don't worry about changing TV settings. Settings like this are tied to a specific input. So if you make these types of changes while the TV is passing the mini's video through to the screen, those changes will only apply to the mini. When you switch to other inputs, like a cable box, etc., the old settings should still be intact and unchanged.

Flash Media Live Encoder 3 Audio Input Level Resets (XP)

I am using Flash Media Live Encoder 3 on a Windows XP computer, with an Ospery-100 capture card for video and a generic sound card line in for audio input. It works fine, except for every time I launch the encoder or even just stop and start encoding (i.e. without closing the application), it resets the line in audio level of my sound card to maximum--not good, as the appropriate setting is actually the minimum. If I don't remember to open the Windows mixer and turn it back down, the audio clips like crazy. No other application I use changes the input leve of my sound card in this way. What is happening here? Any ideas? Any solutions? Thanks.

Have you checked volume slider position in FMLE? If it is set at 100% it would increase the audio level of sound card. Drag slider to lower value to reduce the volume level.

Can a Panasonic HD Camera be used with Adobe Flash Media Live Encoder 3.2

Can a Panasonic HD Camera be used with Adobe Flash Media Live Encoder 3.2 instead of my Laptop webcam.

yes it can but you need an in/out device to "link" the HDMI output from your HD camera to your computer via, USB or firewire
BlacMagic sell those, Matrox and AJA are some of the other brands on the market.

Bad audio with Flash Media Live Encoder (FMLE)

Video is good, but audio is intermittant, 2 seconds on, 2 seconds off.
Using:
15" Macbook Pro, 2013
OS X version 10.8.5
Blackmagic UltraStudio Mini Recorder
Flash Media Live Encoder 3.2
CPU usage is below 50%
Dropped the sampling rate down to 8000 Hz.
Put bitrate down to 48 kbps
Intermittant audio persists.
Above hardware works great with Livestream's Procaster.
Adobe Help suggests ensuring that the buffer length on the subscribing computer is set to a non-zero value. Where can this be done?

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

Using Flash Media Live Encoder with a camera without FireWire

Hi,
Right now we have beeing using an old DV tape based camera connected to Flash Media Live Encoder via FireWire for live streaming.
We are looking at getting either an Sony AX2000 or HXR-NX5U camera as they are flash based. Unfortunately, they don't have FireWire ports.I image that I would not be able to stream via USB, but I'm not sure if anyone is familar with either of these cameras.
Does anyone know of any posisble way (ideally without new equipment) that this would work?
Ports on the HXR-NX5U
Audio Out      RCA type (CH-1, CH-2)
Component Out     RCA type (x3) via A/V multi connector
Composite Video Out     RCA type (x1)
S-Video Out     N/A (optional VMC-15FS is required.)
SDI Out     BNC (x1)
HD-SDI/SD-SDI selectable
USB     Mini-B (x1)
Thank you for your help!

Hi there,
You may be able to take the RCA connection out of the new camera and put it in to your old DV camera if it has the avaliable inputs?
Also, USB is sometimes used for video so I woul have a look around for some info about it with your camera.
failing that your best bet would be to either buy a cheap Aanlog to Digital Concerter (ADC) that takes in composite and firewire on the RCAs. this woul mean that you are using the lowest quality and resolution that is avaliabe to you though!
You could stump up of an SDI or HDSDI input from the likes of AJA or Blackmagic. this would also give you the digitised XLR audio inputs
Hope this helps!
Nick

Why i can not open Video Capture Device Settings in Adobe Flash Media Live Encoder?

Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

How can I install Adobe Flash Media live encoder on a G5 power pc?

How can I install Adobe Flash Media live encoder on a G5 power pc?

Unfortunately, you can't. When FMLE was initially released in 2007, Apple had already transitioned to using Intel processors in their computers. Your PowerPC processor isn't compatible with software written for an Intel processor. From Adobe's website, the (5 year-old) FMLE v. 3.2 has these system hardware requirements for the Apple platform:
• 2 GHz Intel Core 2 Duo or faster processor
• Mac OS X v10.5.6
• 1GB of RAM
• 50MB of available hard-disk space (excludes archived FLV and F4V files)
• 1024x768 screen resolution
• QuickTime compatible audio/video capture devices
• QuickTime 7 software or later

Multicast media rtmp publish must use Flash Media Live Encoder? Flash 11.4, I use a worse problem

I use the example FMS installation files, Flash Media Live Encoder is very well, but when I released the source replaced with flash 11.4 a worse problem.
Beginning everything is normal and Flash Media Live Encoder does not make any difference, but when I upload bandwidth limit to 2KB / S (This situation often occurs in the actual situation, such as the user suddenly side live side of upload files), video and audio becomes very blocked, this is not the key to the problem is to when I upload bandwidth settings for normal, blocking situation will be no better, and have been very bad, but Flash Media Live Encoder automatically adjusted to normal, flash 11.4 but not.
I have to use flash 11.4, nobody will go to install Flash Media Live Encoder.
Mike Do you test only test Flash Media Live Encoder, but did not test flash, or flash need another set of code, but I really can not find a reason.
Please help me, God。
https://bugbase.adobe.com/index.cfm?event=bug&id=3363878

There are ways to?

Audio sync issues with adobe flash media live encoder stream

Using Adobe Flash Media Live Encoder to produce a 24/7 streaming network through Brightcove platform. No matter what I do or how I configure audio and video, there is ALWAYS an audio sync problem that developes. HELP??

Moving this discussion to the Flash Media Live Encoder forum.

FMS 3.5 DVR Using Flash Media Live Encoder 3.0

Hi,
I am trying to work out the DVR feature of FMS 3.5 by using
the Flash Media Live Encoder 3.0 but it failed.
On right bottom of the Flash Media Live Encoder's UI, there
is a check box labeled "". I subscribed a live stream to FMS 3.5
with that check box checked and the server side report a error:
Method not found (DVRSetStreamInfo).
So it seems that the FMLE send a remote function call on the
sever side but the server side script has no definition of this
method.
Dose anybody know how to get rid of the problem.
Thanks,
Ang

here's some sample code you can use in a server-side action-script to deal with the fme dvr recording:
(a list of all available properties can be found at the end of this post)
Client.prototype.DVRSetStreamInfo = function(dvr_obj)
     //    if the date is Wed Dec 31 1969 it's starting
    if (dvr_obj.stopRec.getFullYear() <= 1970)
        //place code here to start / continue recording.
        /* sample:
          var new_stream = Stream.get("recorded_ " + dvr_obj.streamName);
          if (new_stream)
               if (dvr_obj.append)
                    new_stream.record("append");
               else
                    new_stream.record();
               new_stream.play(dvr_obj.streamName);
    else
        //place code here to stop recording.
          /* sample:
          var new_stream = Stream.get("recorded_ " + dvr_obj.streamName);
         if (new_stream)
             new_stream.record(false);
here is a list of properties available to the "dvr_obj" passed from FMLE:
- all properties below are informational only they are meant to be used on the server-side to pass the information to the correct function.
streamName : string
callTime : date
startRec : date
stopRec : date
maxLen : number
begOffset : number
endOffset : number
append : boolean (fmle sets this to true if the stream was cut-off without the user pressing "stop" or if the user pressed "pause"...)
offline : boolean

How to use Flash Media Live Encoder as a web Service

Coud we use the Flash Media Live Encoder as a Web Service installed on another Server (Preferebaly on the Flash Media Server Itself).

FMLE is typically used on the client side, and it doesn't have any sort of API that you would use to run it as a service. That said, unless you wanted to publish a camera that is connected to the server, I'm not sure why you'd want to run FMLE as a service.
Perhaps if you explain what is is you want to accomplish....

Audio player not give an option on the Adobe Flash Media Live Encoder

Audio player not give an option on the Adobe Flash Media Live Encoder: How do I resolve this problem?

Please ask your question on Adobe Media Encoder forum: http://forums.adobe.com/community/ame
This forum is for Adobe Reader.
~Deepak

Can I use multiple audio inputs in Flash Media Live Encoder?

Similar Messages

Maybe you are looking for