Can I use multiple E4200's in bridge mode, to enable a "guest wifi' mesh?
I have four E4200 units on my network, each with an unique IP address, in bridge mode to act as a wireless mesh across my entire building. They are all connected to my central L3 switch, via their Internet ports.
Is it possible to enable the Guest network on each unit, to create a 'Guest Wifi' mesh (providing that I allow the 192.168.33.0 network to route across my network fabric), or will this not work because each indivudual AP will be assigning IP address 192.168.33.1 as it's gateway address meaning that I would have four distinct MAC addresses within the network, each trying to claim that they are IP 192.168.33.1?
As soon as you enable guest access on the router, it will start providing the IP address 192.168.33.x to the clients connecting to the guest network and we cannot change the IP address range of guest network.
Since you have 4 units (E4200), you can enable guest wi-fi of each of them however cannot create a guest wi-fi mesh as all the 4 units have different IP address.
Similar Messages
-
can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones
Yes, you can have as many devices - iPhones, iPods, iPads - as you like using the same iTunes account.
-
How can I use multiple row insert or update into DB in JSP?
Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing. -
Can i use multiple icloud accounts on 1 device
Can I use multiple icloud email accounts on one device?
Yes, you could have multiple iCloud accounts for Mail, Contacts, Calendars, Reminders, Safari, Notes, and Find My iPhone, but only one primary iCloud account for Photo Stream, Documents & Data, and Storage & Backup.
-
Can i use multiple icloud accounts in my find my iphone app?
Can i use multiple icloud accounts in my find my iphone app? I have multiple accounts that i want to tie to that app.
You can't buy another one. You have to reuse one of the accounts previously set up on your phone, or create a new one to use on another iOS device (running iOS 5 or higher) or Mac (running OS X 10.7.2 or higher), if you have one.
-
How Can I Use Multiple Weblogic Instances in a Single OS
Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS
-
Can you use multiple plugins on one piece of media?
can you use multiple plugins on one piece of media?
...so for example have one plugin for a UI control bar, another for tracking, and another for advertising?
If this is possible how? What types of plugin would each plugin be and what sort of media element would be required?
Or is this not the correct approach? If not what would the correct approach be?
Thanks in advance for support.I have got this plugin to set it's proxiedElement.
To do so, I needed to follow David_RealEyes advice too.
But I still can not acheive what I set out to find out, all I was trying to do was trace the current time of the videoElement, to begin to understand how plugins work. Can anyone advise please? Thanks in advance for support.
I thought to acheive this I would just need to add a listener for like this:
dispatcher.addEventListener(TimeEvent.CURRENT_TIME_CHANGE, onTimeChange);
Then write the function like this:
private function onTimeChange(e:TimeEvent):void
trace('**********onTimeChange: '+ e.time)
...But this doesn't work.
What am I doing wrong?
Here's the class now for the TraceListenerProxyElement
package
import org.osmf.elements.*;
import org.osmf.events.*;
import org.osmf.media.*;
import org.osmf.metadata.*;
import org.osmf.traits.*;
public class TraceListenerProxyElement extends ProxyElement
public function TraceListenerProxyElement(wrappedElement:MediaElement)
trace('TraceListenerProxyElement')
super(wrappedElement);
// Overrides
override public function set proxiedElement(value:MediaElement):void
trace('override set proxy')
trace('value: ' + value)
if(value)
super.proxiedElement = value;
trace('proxied element set')
enableListeners()
super.proxiedElement = value;
trace('proxied el: ' + proxiedElement)
private function enableListeners():void
trace('enableListeners')
dispatcher = new TraitEventDispatcher();
dispatcher.media = proxiedElement;
dispatcher.addEventListener(AudioEvent.MUTED_CHANGE, processMutedChange);
dispatcher.addEventListener(AudioEvent.PAN_CHANGE, processPanChange);
dispatcher.addEventListener(AudioEvent.VOLUME_CHANGE, processVolumeChange);
dispatcher.addEventListener(BufferEvent.BUFFER_TIME_CHANGE, processBufferTimeChange);
dispatcher.addEventListener(BufferEvent.BUFFERING_CHANGE, processBufferingChange);
dispatcher.addEventListener(DisplayObjectEvent.DISPLAY_OBJECT_CHANGE, processDisplayObjectChange);
dispatcher.addEventListener(DisplayObjectEvent.MEDIA_SIZE_CHANGE, processMediaSizeChange);
dispatcher.addEventListener(DRMEvent.DRM_STATE_CHANGE, processDRMStateChange);
dispatcher.addEventListener(DynamicStreamEvent.AUTO_SWITCH_CHANGE, processAutoSwitchChange);
dispatcher.addEventListener(DynamicStreamEvent.NUM_DYNAMIC_STREAMS_CHANGE, processNumDynamicStreamsChange);
dispatcher.addEventListener(DynamicStreamEvent.SWITCHING_CHANGE, processSwitchingChange);
dispatcher.addEventListener(LoadEvent.BYTES_TOTAL_CHANGE, processBytesTotalChange);
dispatcher.addEventListener(LoadEvent.LOAD_STATE_CHANGE, processLoadStateChange);
dispatcher.addEventListener(PlayEvent.CAN_PAUSE_CHANGE, processCanPauseChange);
dispatcher.addEventListener(PlayEvent.PLAY_STATE_CHANGE, processPlayStateChange);
dispatcher.addEventListener(SeekEvent.SEEKING_CHANGE, processSeekingChange);
dispatcher.addEventListener(TimeEvent.COMPLETE, processComplete);
dispatcher.addEventListener(TimeEvent.DURATION_CHANGE, processDurationChange);
dispatcher.addEventListener(TimeEvent.CURRENT_TIME_CHANGE, onTimeChange);
proxiedElement.addEventListener(MediaElementEvent.TRAIT_ADD, processTraitAdd);
proxiedElement.addEventListener(MediaElementEvent.TRAIT_REMOVE, processTraitRemove);
private function onTimeChange(e:TimeEvent):void
trace('**********onTimeChange: '+ e.time)
private function processAutoSwitchChange(event:DynamicStreamEvent):void
trace("autoSwitchChange", event.autoSwitch);
private function processBufferingChange(event:BufferEvent):void
trace("bufferingChange", event.buffering);
private function processBufferTimeChange(event:BufferEvent):void
trace("bufferTimeChange", event.bufferTime);
private function processComplete(event:TimeEvent):void
trace("complete");
private function processCanPauseChange(event:PlayEvent):void
trace("canPauseChange", event.canPause);
private function processDisplayObjectChange(event:DisplayObjectEvent):void
trace("displayObjectChange");
private function processDurationChange(event:TimeEvent):void
trace("durationChange", event.time);
private function processLoadStateChange(event:LoadEvent):void
trace("loadStateChange", event.loadState);
private function processBytesTotalChange(event:LoadEvent):void
trace("bytesTotalChange", event.bytes);
private function processMediaSizeChange(event:DisplayObjectEvent):void
trace("mediaSizeChange", event.newWidth, event.newHeight);
private function processMutedChange(event:AudioEvent):void
trace("mutedChange", event.muted);
private function processNumDynamicStreamsChange(event:DynamicStreamEvent):void
trace("numDynamicStreamsChange");
private function processPanChange(event:AudioEvent):void
trace("panChange", event.pan);
private function processPlayStateChange(event:PlayEvent):void
trace("playStateChange", event.playState);
private function processSeekingChange(event:SeekEvent):void
trace("seekingChange", event.seeking, event.time);
private function processSwitchingChange(event:DynamicStreamEvent):void
trace("switchingChange", event.switching);
private function processVolumeChange(event:AudioEvent):void
trace("volumeChange", event.volume);
private function processDRMStateChange(event:DRMEvent):void
trace("drmStateChange", event.drmState);
private function processTraitAdd(event:MediaElementEvent):void
trace("Trait Add: " + event.traitType);
private function processTraitRemove(event:MediaElementEvent):void
trace("Trait Remove: " + event.traitType);
private var dispatcher:TraitEventDispatcher; -
Can we use multiple queries on one template
Can we use multiple queries on one template
Hi,
if you're using data templates for your data set, you
can put multiple queries in the XML data template.
The queries may then be linked (or not) by the "link
name" tag ...
Grtz.Following you answer here...do you know eventually how/if possible to preview a report (with XMLP Desktop) that is using data templates for the data set?
Thanks,
Liviu -
Can I use multiple Apple store gift cards (£25 each) per transaction or is it has to be only one gift card per transaction?? Does anyone know thanks
Hola, Eddy
notice that you have posted to an old thread (Oct-Nov2013) that actually took quite some time to get attention back then**
I recommend that you contact the Store Group regarding your purchase question - don't let the "iTune-ish" URL and page title throw you off... it's the right place
Store Group - Contact Us - Apple Support
** next time you have a question, I advise to check the dates carefully and if older than a month or so, AND it has no answer to your specific issue, start a NEW Question. You did a fine job of stating your exact issue - many folks, not so much.
buenos dias
CCC -
Can I use multiple credit cards with family sharing
My kids are adults. Can I use multiple credit cards in family sharing so they can pay for their own purchases?
Hello Cwb1234,
Thank you for using Apple Support Communities.
From what I understand, you want to set it up that your kids use their own credit cards for purchases within Family Sharing. Take a look at the article linked below, it outlines purchases and payments for Family Sharing and may offer a solution to the issue that you’re running into.
Family purchases and payments - Apple Support
Making purchases
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
Once paid for, a purchased item is added to the account of the family member who initiated the purchase. In other words, the content belongs to them, much as it would if you were buying them a book or a DVD. If Family Sharing is ever disabled, each member will keep the purchases they initiated, even though they were paid for by the family organizer.
These are the only current options for payment within Family Sharing.
Regards,
Jeff D. -
Can we use multiple "pivot_for_clauses" in 11g SQL PIVOT
Can we use multiple "pivot_for_clauses" in 11g SQL PIVOT. Below SQL is an example of what I am trying to do - In this case instead of using JOIN, can I have three pivot_for_clauses in the same sql?
SQL:
MERGE INTO Test_1 dest
USING (SELECT P1.company_id,trunc(sysdate) as load_date,num_logins,......
FROM (SELECT company_id,action_type_id
FROM Testauditinfo_1 where trunc(audit_date_time)=trunc(sysdate)-1) a
PIVOT (count(action_type_id) FOR (action_type_id) IN ((1) as num_logins,(2) as num_logouts,(61) as
num_logins_from_mobile_device,(16) as num_pref_changed,....)) P1
JOIN
(SELECT company_id,action_type_id,tx_type_id
FROM Testauditinfo_1 where trunc(audit_date_time)=trunc(sysdate)-1) a
PIVOT (count(action_type_id) FOR (action_type_id,tx_type_id) IN ((3,4) AS add_invoice, (4,4) AS
edit_invoice,(3,3) as num_checks,(3,47) as num_paychecks,(3,7) as num_recvd_payments,(3,9) as num_bills,
(3,35) as num_estimates,(3,46) as num_purchase_orders)) P2
on P1.company_id=P2.company_id
JOIN
(SELECT company_id,action_type_id,list_type_id
FROM Testauditinfo_1 where trunc(audit_date_time)=trunc(sysdate)-1) a
PIVOT (count(action_type_id) FOR (action_type_id,list_type_id) IN ((3,2) AS num_items,(3,1) as
num_accounts,(3,4) as num_employees,(3,6) as num_customers,(3,14) as num_memorized_reports)) P3
on P2.company_id=P3.company_id
left outer JOIN
(SELECT company_id,create_date,count(*) as num_logos
FROM qbo.companylogos_1 group by company_id,create_date having trunc(create_date)=trunc(sysdate)-1) P4
on P3.company_id=P4.company_id
ORDER BY P1.company_id) source
ON ((dest.company_id = source.company_id) and (dest.load_date = source.load_date))WHEN MATCHED THEN
UPDATE SET dest.num_items = source.num_items where 1=2
WHEN NOT MATCHED THEN
INSERT (dest.company_id,.....) values (source.company_id,.....);Maybe
MERGE INTO Test_1 dest
USING (SELECT P1.company_id,trunc(sysdate) as load_date,num_logins,......
FROM (select *
from (SELECT company_id,action_type_id
FROM Testauditinfo_1
where trunc(audit_date_time) = trunc(sysdate)-1
) a
PIVOT (count(action_type_id)
FOR (action_type_id) IN ((1) as num_logins,
(2) as num_logouts,(61) as num_logins_from_mobile_device,
(16) as num_pref_changed,....
) P1
JOIN
(select *
from (SELECT company_id,action_type_id,tx_type_id
FROM Testauditinfo_1
where trunc(audit_date_time) = trunc(sysdate)-1
) a
PIVOT (count(action_type_id)
FOR (action_type_id,tx_type_id) IN ((3,4) AS add_invoice,
(4,4) AS edit_invoice,
(3,3) as num_checks,
(3,47) as num_paychecks,
(3,7) as num_recvd_payments,
(3,9) as num_bills,
(3,35) as num_estimates,(3,46) as num_purchase_orders
) P2
on P1.company_id = P2.company_id
JOIN
(select *
from (SELECT company_id,action_type_id,list_type_id
FROM Testauditinfo_1
where trunc(audit_date_time) = trunc(sysdate)-1
) a
PIVOT (count(action_type_id)
FOR (action_type_id,list_type_id) IN ((3,2) AS num_items,
(3,1) as num_accounts,
(3,4) as num_employees,
(3,6) as num_customers,
(3,14) as num_memorized_reports
) P3
on P2.company_id = P3.company_id
left outer JOIN
(SELECT company_id,create_date,count(*) as num_logos
FROM qbo.companylogos_1
group by company_id,create_date
having trunc(create_date) = trunc(sysdate)-1
) P4
on P3.company_id = P4.company_id
ORDER BY P1.company_id
) source
ON ((dest.company_id = source.company_id) and (dest.load_date = source.load_date))
WHEN MATCHED
THEN UPDATE SET dest.num_items = source.num_items where 1 = 2
WHEN NOT MATCHED
THEN INSERT (dest.company_id,.....)
values (source.company_id,.....)Did you try it ?
Regards
Etbin -
Can I use an AE as a Bridge allowing me to hardwire my iMac and offer a wifi to my MacBook? The Ethernet in my office is hard wired but does come in from a router on the other end of the building that has a wifi that cant reach my office...
Thanks, I thought so but wanted to be sure before running out and buying one... I also called Apple Joint Venture and they helped me set it up without the Airport by using my iMac as the wifi! Thanks again!
-
Can you use airport extreme as a bridge to netgear wdnr4500 wireless router
can you use airport extreme as a bridge with a netgear wndr4500 router.I need to extend my wireless connections to the other side of the house
can you use airport extreme as a bridge with a netgear wndr4500 router.
This is extremely unlikely. The AirPort Extreme can provide this function with other Apple routers, but as far we know, it is not compatible with products from other manufacturers for this purpose.
Suggest that you use a Netgear product for the best chance of compatibility. -
Can I use multiple p class="logos" tag with the same name within the same html page?
I was told not to use <div class> tags too many times. I was using them for text, images, to clear floats, I basically built my website using multiple <div class> tags. So if I can't use multiple <div class> tags could I use <p class> tags multiple times in the same html page?
I have a string of logos at the bottom of my webpage which will all be using the same css characteristics for all logos. Would this be the proper way to write the code:
HTML
<p class="logos">Logo1<a href="...></a></p>
<p class="logos">Logo2<a href="...></a></p>
<p class="logos">Logo3<a href="...></a></p>
<p class="logos">Logo4<a href="...></a></p>
<p class="logos">Logo5<a href="...></a></p>
<p class="logos">Logo6<a href="...></a></p>
CSS
.logos {
margin-left:10px;
Here's my website: http://www.darbymanufacturing.com/test_website/index.html - this is the website built with all div class tags
I restarted the website in order to write the code properly so that I don't come to errors when uploading on the server like I am having with the website link above.Instead of writing something like this -
<p class="logos">Logo1<a href="...></a></p>
<p class="logos">Logo2<a href="...></a></p>
<p class="logos">Logo3<a href="...></a></p>
<p class="logos">Logo4<a href="...></a></p>
<p class="logos">Logo5<a href="...></a></p>
<p class="logos">Logo6<a href="...></a></p>
Why not have something like this -
<div id="logodiv">
<p>Logo1<a href="...></a></p>
<p>Logo2<a href="...></a></p>
<p>Logo3<a href="...></a></p>
<p>Logo4<a href="...></a></p>
<p>Logo5<a href="...></a></p>
<p>Logo6<a href="...></a></p>
</div>
with CSS like this -
#logodiv p { ... } -
Using table comparison can we use multiple tables as source?
Using table comparison can we use multiple tables as source?
Thank you very much for the helpful info.Table Comparison
1) Input Data coming in
2) Comparison table (table to which the data is compared)
3) Output (input rows with respective opcodes based on the comparison result of input dataset with the comparison table)
If your question is whether table comparison can accept union/join of multiple table sources, you can achieve by using merge/query transforms and then feeding to table comparison. Here, you have to be careful about choosing the primary keys inside table comparison
Maybe you are looking for
-
Getting SUID has been changed and won't be fixed when using Disk Repair utility.
While attempting a disk repair, the first message that appears in the string is, "Warning: SUID file System/Library/CoreS...has been modified and will not be repaired." Is this a bad thing? If so, how do I fix it? My computer has been taking forever
-
Payment Terms based on Value Date (UDF)
Hi, is it possible and if how? I want to create a new Payment Term based on a value date which is maybe months ahead. So the docduedate is after this value date but the document shall already go into accounting. how is this easily possible?
-
About T500 15.4 WXGA TFT Screen
Hi all, I just received a T500. I found the screen is kind of fluorescent. My eyes get tired easily with this screen. I adjusted the brightness, however it didn't help. Is it a usaul problem of this screen model or just a problem of my laptop? Ho
-
SCOM 2012R2 Operations Manager Multi-tenancy
Hi I am interested to hear people's deployment experiences with SCOM OpsMgr 2012 R2 in a multi-tenant / Service Provider environment. I have an interest in setting up a Management Group that will receive alerts (etc.) from external SCOM 2012 agents l
-
Display check box in a Table Control in MPP Programs
Hi, I need to display checkbox in my table control in my MPP screen, can any body help. Regards, Srinivas