Can I use Multiple Sequences for DV and H.264?

I have half my video in FCE as DV and sequence set to 720x480. The other half is H.264 1280x720. Can I make a second sequence? If so, then do I combine the two with a final sequence set to 720p?
Thanks,
Rod

You coud but the DV sequence would be half the size of the HD sequence and would appear as a small box inside the HD sequence. Or you could place the HD squence in the standard definition sequence, scaling it down. There might still be an issue if the aspect ratios are different. The HD sequence would appear letterboxed in a standard 4:3 sequence.

Similar Messages

Can I use same account for android and PC and how ...

Can I use same account for android tablet and PC and how do I link both?

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

I download ios8 I can't use my song for ringtone and other ringtone it is not loud and I miss call

I Download ISO 8 and I can't use the song for my ringtone , but it vibrate and I can't hear the phone rings . Other ringtone it is not loUd

There is a difference between the passcode and the sync key.<br />
The passcode allows to setup all sync parameters with a single code on other devices.<br />
To enter the sync key (and user name and password) you need to click on "I don't have the device with me" at the bottom of the "Add a Device" window (Click Connect).
* https://support.mozilla.com/kb/where-can-i-find-my-firefox-sync-key
* https://support.mozilla.com/kb/find-code-to-add-device-to-firefox-sync

Can I use multiple IDs for one iTunes and multiple devices

We have one family computer with iTunes, my older brother has an iPhone and I have an iPhone. A family ID was previously used to purchase songs for the family to share. My older brother has created an apple ID for his iPhone, and l have a yet unused apple ID. my brother downloaded songs etc onto the family iTunes that I would like to share, there are songs on the family apple ID that we would both like. Can you download purchases from multiple apple IDs into one iTunes account, then sync that data onto multiple phones that each have a separate ID? Is iTunes linked to one ID? Can purchases from multiple IDs be grouped together in our family account. Also do I Actually need a separate Apple for my iPhone to prevent private messages and contacts being shared?
Thanks for any advice

I forgot to add my iPhone is brand new and unused, and also that the iTunes account has non purchased songs on there. Can these be shared. As it is a new computer the purchases from the family ID have not been downloaded yet

Can I use multiple values for a rollup key on the same Endeca record?

We have a business need to to aggregate our records using different criteria, based on user navigation. We are thinking of using a rollup key with multiple values to help with the aggregation, but we are running into some issues.
Here is a made-up xample of what we want to do: assume we have a group of products and these products can be organized into groups using parent-child relationships. We would like to create an aggregate record for each parent, and we want the aggregate record for each parent to include all the children for the parent. To achieve this, we use a field called "parent_rec_spec" that holds the parent record spec and we set the same value on the field for the parent and its children. When we do rollup using the parent_rec_spec as the rollup key, we are able to see one aggregate record for each parent (with its children).
The previous setup worked perfectly for us so far. But now we are getting a business requirement that allows children nodes to be linked to multiple parents at the same time. We were hoping of using another dimension to limit the records based on user roles/characteristics , so that only applicable parents/children are displayed (for example, we can use "market" as an additional filtering property, and we decide to show all parents/children for "North America", while hiding the parents/children for other markets).
This caused an odd behavior when children are linked to multiple parents. For example, assume that SKUs A and B were linked to parents in "North America" and "Europe" at the same time, and assume that the user chose the "North America" market. The navigation state would eliminate the parents/children that are no in North America, and will also cause the parents/children that are labeled for North America to show up and be aggregated correctly. This however will lead to the creation of additional aggregate records for the A and B using the parent_rec_spec values that would have linked them to the Europe parents (even though the parents are hidden away).
Here is an example index file that we used to load the test data:
Update||1
Market||North America
Record Type||Product
Name||Parent 1
rec_spec||P1
parent_rec_spec||P1
EOR
Update||1
Market||Europe
Record Type||Product
Name||Parent 2
rec_spec||P2
parent_rec_spec||P2
EOR
Update||1
Market||North America
Record Type||Product
Name||Child A
rec_spec||A
parent_rec_spec||P1
EOR
Update||1
Market||North America
Market||Europe
Record Type||Product
Name||Child B
rec_spec||B
parent_rec_spec||P1
parent_rec_spec||P2
EOR
Update||1
Market||North America
Market||Europe
Record Type||Product
Name||Child C
rec_spec||C
parent_rec_spec||P1
parent_rec_spec||P2
EOR
Update||1
Market||Europe
Record Type||Product
Name||Child D
rec_spec||D
parent_rec_spec||P2
EOR
In this setup, we have parent P1 marked for North America with children A, B and C, and parent P2 marked for Europe with B, C and D as children. When we use North America as a filter in the navigation state, and parent_rec_spec as the rollup key, then we will see an aggregate record for P1, A, B and C. But we will also see an aggregate record for B and C by itself (presumably because of the other parent_rec_spec value on these records).
The actual data that we are testing with is more complicated, but the end result is similar. We also noticed that the additional aggregate records would not be created always, depending on the ordering of the records.
The question that I need help with is this: is there a way to fine tune the rollup logic so that it can only include certain records (in the example above, we can change the rec_spec from PA and PB to PA_North_America and PB_Europe and then we would be interested in rolling up using values that end with NorthAmerica).
By the way, we considered using separate rollup keys for each context (like parent_rec_spec_north_america and parent_rec_spec_europe), but the number of contexts is dynamic, and might grow large. So it is not easy for us to create the additional properties on the fly, and we are concerned about the possible large number of dimensions.

http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=2&threadid=1157850

Can I use Airport Express for printing and Ethernet printing at same time?

I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
Any help would be TOTALLY appreciated!
Leigh-Ann

Hello Kappy! Thank you for taking the time to reply to my question.
I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
-went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
-In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
-Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
-Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
-I got a dialogue box that asked about other installable features - clicked ok.
-when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
-I tried to repair permissions, but it did not resolve my issue.
-I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
Ethernet (Address: 08:00:07:84:78:e9)
EtherTalk: PostScript
NetWare: AutoSelect
TCP/IP: AutoSelect
IP address: 0.0.0.0
And - now finally, to answer your questions (the best I can, that is)
I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
Should I have these cables hooked up differently?
What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
Thank you again.
Leigh-Ann

Can you use multiple songs for a slide show in iphoto ios 2.0?

I want to prepare a 10 minute slide show that uses more than one song. It seems you can use a playlist using iphoto for mac (and I have seen that in other discussion threads) but what about iphoto for IOS on an ipad? It seems to let me only use one song. I am on IOS7 and using the lastest iphoto for ipad (v 2.0)Any suggestions out there? Thanks

You are welcome. Have a look at the GarageBand Help to get started.
Basically you need to
Create a new project - select an empty project template.
Open the Media Browser and drag the songs from your iTunes playlist into the track area.
Use the "Share" menu to send your new sound track to iTunes.
This screenshot is from GarageBand 10.0, but in GarageBand '11 it would be similar.
Just in case that you want to add some sound effects to the soundtrack, like rain or thunder, you will find the clips in the Loop Browser:
Good luck for your slideshow

Can I use multiple device for reading ebook ?

My company have own shop that will be integrated with ACS4 and one important feature of my shop is
that "customer pay for single ebook then they can read that ebook on multiple devices that is registered with my shop".
And my shop can manage, add, edit and remove customer device itself. Is it possible to do that ?
I notice that when I download ebook from sample store I can copy acsm file to my friend and he can open acsm file then download an ebook
via adobe digital edition. How can I specific only user who buy ebook can download ?

Yes and no. Yes, if you sell a book through ACS4 (without adding a device restring), the user can read the on any computer or device that they have activated with their Adobe DRM account. No you can not manage these devices on your site or specify a subset other than have a single device restriction.

Can i use the TC for Audio and video storage? How?

I have a Time capsule and i want to use it to storage audio and video, and use it with my Home theater system. I am not sure how can i play it? Ipad? OS?
Somebody has experience with this?

Why are you asking in the iphone forum?
The ipad forum would be a better place to ask.

Can you use same earphones for iPhone and iPad air

Can you use the earphones from an iPhone on an iPad air

Welcome to Apple Support Communities
Of course. They are compatible with both iPhone and iPad Air

How can I use Time Capsule for backups and an external hard drive?

I have a large file/program on my iMacs hard drive that is 62GB and I would like to keep only things I need on my iMac. I have a 2tb time capsule currently used for backing up. It has roughly 1.66 TB free. How can I move the 62GB program onto my Time Capsule and still use it for backups? Also, is this stable? And don't worry about backing the program up because it came on 8DVD discs.
Thanks.

1. Mount the Time Capsule as a drive and drag the application over to it. If the application requires system components, those won't be transferred; if those are only data files, you may be able to drag them over as well and then create a symlink or alias to a folder enclosing their current location.
2. The application may work slowly if this is done. Note that Time Machine will eventually use up all the free space on the Time Capsule that isn't reserved by being allocated to a disk image.
(66649)

Can I Use multiple HTTPHeaders for authentication?

Hello,
I got a question about login into portal with HTTP Headers.
My system has two different reverse proxys with their respective agents of authentication, and each one of them gives me a HTTP Header with a different name, but the content will be always the same: the user name.
Can I configure a Login Module Stack with two HeaderVariableLoginModules? I guess it's possible, but I'm not really sure. If it's possible, will be something like the next?
EvaluateTicketLoginModule     SUFFICIENT    {ume.configuration.active=true}
HeaderVariableLoginModule     OPTIONAL      {ume.configuration.active=true, Header=HEADER1}
CreateTicketLoginModule        SUFFICIENT     {ume.configuration.active=true}
HeaderVariableLoginModule     OPTIONAL      {ume.configuration.active=true, Header=HEADER2}
CreateTicketLoginModule        SUFFICIENT     {ume.configuration.active=true}
BasicPasswordLoginModule    REQUISITE {}
CreateTicketLoginModule        OPTIONAL     {ume.configuration.active=true}
Thank you in advance

Hi Marc,
What you have is exactly right - we are using a very similar stack.
In essence, you can chain any number of authentication modules using the form:
EvaluateTicket - SUFFICIENT
Module1 - OPTIONAL
CreateTicket - SUFFICIENT
Module2 - OPTIONAL
CreateTicket - SUFFICIENT
ModuleN - OPTIONAL
CreateTicket - SUFFICIENT
BasicPassword - REQUISITE
CreateTicket - OPTIONAL
The principle is that CreateTicket will only be successful if there is a valid user in the context (from the previous Module), so the logic progresses down the stack until a Module correctly gets a user, and then exits with a successful Sufficient CreateTicket.
The last two lines provide a fallback position which is to allow a username/password login if all else fails.
Hope this helps,
Darren

I can not use the arrows for previous and foward at the top of the browser bar.

At the top of the screen there are two arrows, left and right, to click on to move back and forth from current screen to the previous screen such as a list of websites. The arrows are visible but not highlighted to be used.

I was having a similar problem but only when answering calls. A reset seems to have fixed it. http://support.apple.com/kb/HT1430
If that doesn't do it you may need to contact Apple Care or take it in for repair.

Can I Use Airport Express for Airplay and a non-apple router with streaming capabilities on the same network?

I want to do the following things but can't find one device that fits all purpose.
Wi-Fi router that has USB port to share external hard disk wirelessly to all devices (Mac, Samsung Smart TV, PC, Ipad, Iphone) along with inbuilt torrent download capability that also has a 3.5mm jack to do airplay.
Greedy? Yes I know but why can't we have it all I ask.
Airport Express severs Wifi Router + Airplay purpose
Then there are other non-apple routers in market that satisfy my need to attach external hard disk and stream to the devices mentioned (Note: Timecapsule will not stream to my Smart TV)
So I am thinking why not connect both Airport Express and a second non-apple router and get best of both worlds.
Is it possible?
Thanks in advance.

I want to do the following things but can't find one device that fits all purpose.
Wi-Fi router that has USB port to share external hard disk wirelessly to all devices (Mac, Samsung Smart TV, PC, Ipad, Iphone) along with inbuilt torrent download capability that also has a 3.5mm jack to do airplay.
Greedy? Yes I know but why can't we have it all I ask.
Airport Express severs Wifi Router + Airplay purpose
Then there are other non-apple routers in market that satisfy my need to attach external hard disk and stream to the devices mentioned (Note: Timecapsule will not stream to my Smart TV)
So I am thinking why not connect both Airport Express and a second non-apple router and get best of both worlds.
Is it possible?
Thanks in advance.

Can I use the same icloud username and password for multiple phones?

I have 6 iphones and wanted to use Apple Configurator to install the same apps on all 6 phones. Some of the apps though, also require further installation by email. Can I use the same iCloud username and password for all 6 phones to download the apps and also to configure email or do I need to create 6 different Apple IDs?

If different people will be using these phones, you might be better off using the same Apple ID for the iTunes content...apps, music, etc. on each of these devices, but create different ID's for iCloud on each device. You can use one ID for the iTunes/App store, & a different ID for iCloud. That way, messages, notes, contacts, calendars, etc will be kept separate on each device.

Can I use Multiple Sequences for DV and H.264?

Similar Messages

Maybe you are looking for