Can I use my airport express to extend a wireless network with a non-apple router?

I have been trying to extend my wireless network in my house. Right now I have a dsl modem/router provided by Century Link and an older AirPort express (not sure how old but it uses AirPort utility v5.6). I want to be able to share my printer and use AirTunes. Currently I have the AirPort plugged into the router and setup to create a new wireless network. I would like to combine them so I don't have to switch between to print and play music. I am not really sure where to start or if it even possible. Any info would be great!

If you keep the Express connected using Ethernet and configure the Express to "Create a wireless network" using exactly the same wireless network name, exact same wireless security and same wireless password as the Century Link network.....everything will behave as one "big" network, and you will have additional wireless coverage near the Express.
If you do not need extra wireless coverage, you can turn off the wireless on the Express.
The Express must be in Bridge Mode.
Most users know the name of their wireless network and password, so the really tricky part of doing this is that you must know exactly what type of wireless security settings the Century Link router is using....and then match up the same settings on the AirPort Express.
If the settings do not match up exactly, then you wind up with two separate networks that will each require their own log on.
If you can check the setting for wireless security on the Century Link router and provide that information to us, we can tell you how to set things up the way that you would like.

Similar Messages

How can I use an airport extreme to extend my wireless network?

I have a Verizon FIOs router with both wireless and ethernet capability. I also have an airport extreme base station, which is currently connected to the Verizon router by Ethernet and provides wireless to a MacBook in a distant room upstairs. Practically, I have two wireless network now. I have two G4 Sawtooth, which do not have wireless PCI card and require ethernet connection for internet. One of them is in the upstairs study room and connected to the Verizon wireless router by Ethernet. The other is in an downstairs room has not wireless connection.
Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network? If so, how do I set up the airport station downstairst? If not, I know that I have get a PCI wifi for the Sawtooth downstairs.
Your advice is greatly appreciated.
Robert

Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half.

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

Can I use my AirPort express to create a wireless network in my uni room?

So, I'm going to university in september and my room has an ethernet port to connect to the internet. If I buy an AirPort express, can I plug it into the ethernet port to create a wirelss network in my room?

The quick answer is yes. However, You should check with the appropriate University authorities to make sure they will allow it (some do not) If they agree, they may offer you a tutorial as to what you need to do to enable it.
Many business people utilize the Airport Express to provide the convenience of Wi fi in their hotel rooms, if the hotel doesn't supply an in house Wi Fi system.

Can I use an Airport Express to extend a network using a Bwrg500 router?

Can I use my Airport Express to extend my wireless network while using a Bountiful BWRG500 wireless router? The Bountiful wireless router has the WDS abilities.
http://www.bountifulwifi.com/Products/BountifulRouter500G/Overview.aspx
Thank you for looking.

It is in fact possible to extend your network using WDS. I say this under the assumption that your statement regarding the WDS capabilities of the Bwrg router is correct. However, keep in mind that you cannot use a WPA or WPA2 password with a WDS extended network. You must either use no encryption or use WEP. Unfortunately some routers require WEP passwords that use either 10 or 26 digits ONLY while the express uses a 13 digit password.
This can be a troubling problem considering that most people need a wifi password to ensure safe and secure browsing.

Can I use an Airport Express to extend a network, but give it a separate SSID network name?

I have an Airport Extreme, and can successfully connect an Airport Express to extend the wireless network. However I want to give the Airport Express a separate SSID so that I can specifically connect to it. Is it possible to configure the Airport Express in this way?

AirPort base stations have essentially three network choices: join, create, or extend.
If you want to connect to a specific network, something must "create" that network. An Express can do that, but it must derive its connection via Ethernet since it cannot simultaneously become a client of one wireless network while creating another.
It is exactly as CRMDVM wrote but that's why.

Can I use an Airport Express to extend wifi w/o TC?

Hi-my setup is this: I am using an Linksys modem and an ASUS router. I have a new Time Capsule but I am only using that for Time Machine backups. My wifi signal is weak upstairs and I was wondering if I could put an Airport Express up there to extend my network.... Remember that my TC is not being used as a router. I am hoping that I can just plug in a new-but-not-yet-purchased Airport Express upstairs and it will strengthen my wifi upstairs. Will that work? Thanks for the help!!! Judy
PS-I have a MB Pro running the latest version of Mavericks, an iPhone 4S and a 4th Gen iPad.

I am hoping that I can just plug in a new-but-not-yet-purchased Airport Express upstairs and it will strengthen my wifi upstairs. Will that work?
An AirPort Express could extend the wireless signal provided by another Apple product, in this case the TC, but since the TC is not being used this way on your network, the Express would be of no value to you. It cannot wirelessly extend the signal provided by the ASUS wireless router.
Check with ASUS support or an online forum for suggestions on a repeater or extender that would do what you need.

Can I use an airport express to extend a Cisco E4200 802.11n or 802.11g wireless network?

Can I use an Airport Express to extend a Cisco E4200 802.11n or 802.11g wireless network? I'd like to improve access in a dead spot with an airport express. I know I can connect this wayt for airplay, but how about extending the signal?
Thx! ACB

Apple's "extend a wireless network" function appears to be a proprietary feature that works only with other Apple AirPort routers. As far as we know, this feature is not compatible with devices from other manufacturers.
It would be extremely unlikely that the Express could do what you want, but some things are never known until you try.

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Using Airport Express to extend my wireless network

I recently purchased a Time Capsule but found that I could not see the wireless signal from my bedroom. To solve this I purchased an Airport Express to extend the range. I plugged the AE into an outlet in my bed room and set it up to join my existing network. Everything looked fine from the point of view of the Airport Utility. Unfortunately my iPod Touch still can not see my wireless network from my bedroom. I new iPad can see it but the signal is very weak, even when I hold it right next to the AE. Is there a setting I missed?

Rick, welcome to the discussion area!
I plugged the AE into an outlet in my bed room and set it up to join my existing network.
You need to configure the AirPort Express to "Extend a wireless network". The AX does not provide any additional wireless coverage when it is set to "join".
First, you need to check a setting on your Time Capsule as follows:
AirPort Utility > Manual Setup > Wireless tab (below the icons)
Make sure there is a check mark next to "Allow this network to be extended"
Update to save any changes
On the AirPort Express move it close to the Time Capsule for configuration:
AirPort Utility > Manual Setup > Wireless tab
Wireless Mode = Extend a wireless network" (Hold down the option key on your Mac if you do not see this choice appear when you click the selection box).
Wireless Network Name = Same name as your Time Capsule Network
Check mark next to "Allow wireless clients"
Security = Same setting as your Time Capsule
Password = Same password as your Time Capsule
Confirm Password
Update to save settings
The AirPort Express can only "extend" what it "receives". Most users position it too far away from the main router and consequently, the Express extends a weak signal. Try a location that is about 1/2 to 2/3 the distance between the Time Capsule and the area that needs move coverage. Then experiment a bit to find the best signal.
Post back on your results.

Can I use an Airport Express to extend coverage for Apple TV

I hooked up an Apple TV today to replace my Airport Express. Is it possible to use the Airport Express to extend coverage throughout my house for the appleTV, or are they not compatible in that sense?

Will the ATV work as far as the wireless signal goes? Basically, I can walk halfway through my backyard and them my itouch will cut out. I want to be able to control music (as I do inside) with my Itouch throughout my back yard, and my thought was to put the AX in a location closer to where I would use my ipod outside in an attempt to increase the wireless range.
I just played with the settings on the Airport and switched it to "enhance an existing wireless network." Tomorrow I'll try to see if this helps to accomplish what I am setting out to do. If anyone has any feedback, by all means share it.

Can i use 2 airport express to extend airport extreme

My current set up: Verizon FiOs - using Airport Extreme as the wireless router (Bridege mode) with one Airport Express as range extender - works flawless.
Recently purchase the Airport Express Base - to use as another wireless range extender - but getting error when trying to set up via Airport utility app. Can i have 2 Airport express as wireless range extender?

Yes, you can use multiple 802.11n AirPort Express base stations to extend the 802.11n AirPort Extreme. Think of the extended network as sort of a wheel with the extended base station at the hub and the extending base stations on each of the spokes of that wheel. Each extending base station would be configured the same way.
Please check out the following Apple Support article for setting up an extended network.

I can't use my Airport Express to extend a non-Apple wifi router's signal?

I just bought an Airport Express at the Apple Store, and the genius I asked there told me I could use my Express to extend any wifi router's signal, even if it isn't an Apple product.
We currently have a weak wifi signal upstairs in our home, and I'm hoping to improve the signal.

the genius I asked there told me I could use my Express to extend any wifi router's signal, even if it isn't an Apple product
Unfortunately, the "genius" is wrong if you are trying to "extend" using wireless only.
As far as we know and have tested with many different products from other manufacturers....the Express will only "extend" another Apple router.....an AirPort Extreme, Time Capsule, or another AirPort Express.
Another way of saying the same thing is that it is likely not possible to extend a wireless network...using wireless only...unless you have two Apple routers.

How do I use airport express to extend my wireless network?

How vcan I extend the range of my wireless network using Airport Express?

It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
name of the wireless network
the correct wireless security settings
and correct password.
"Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc. Extremely limited.
Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet. What exactly would that achieve?
That is a completely different subject since this discussion is about extending a wireless network using wireless only.

How do I use my airport express to extend the wireless range of my NETGEAR 7550?

I am trying to extend the range of my Netgear 7550 using the airport express. When trying to set up the airport express it said that I was unable to extend the Netgear. Any ideas how to make it work?

You need to configure a roaming network.
Wi-Fi base stations: Setting up and configuring a roaming network (802.11 a/b/g/n)
http://support.apple.com/kb/HT4260

Can I use my airport express to extend a wireless network with a non-apple router?

Similar Messages

Maybe you are looking for