Can I use my custom board with LPC2378 processor with ULINK2 on Embedded module for ARM and LV.

Issues in ARM and LV
Can I use my custom board with LPC2378 processor with ULINK2 on Embedded module for ARM and LV.How can I create my elemental I/O vis or I have to use the existing Keil board vis. Confused. Please help.
I have LV8.6. Which ver of embedded module for ARM should I buy. Website shows combined price for ARM module and LV. But I already have LV8.6 so what is the cost of module.
Regards
Shradha

          If the processor of your development board is the cortex-M3 core, I think you do not have to buy keil board. Now, there are a lot of OS and emulator suitable for Cortex-M3.
          Operating system I am referring to is the real time operating system such as keil RTX,uCOS,FreeRTOS,CooCox CoOS and so on. CooCox CoOS is very new, you can get more information from http://coocox.org/ .
          Emulator or debugging tools such as ULINK2,st-link,Jlink,CooCox Colink and so on. CooCox Colink is also very new. You can download the Colink Plugin from here Colink Plugin .

Similar Messages

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini

Can I use the Apple ADC to DVI adapter with a VGA monitor?

Hey everybody,
I have a quick question. I work on computers fr friends and family as a hobby. I have an ADC monitor and need ot be able to hook up computers with a VGA port on them to it. Can I use the Apple ADC to DVI adapter along with an Apple DVI to VGA adapter to successfully connect VGA computers to my ADC display? I was assuming this would work and ordered both adapters but now I have made myself nervous about weather or not this will actually work. Has anybody out there successfully done this? Thanks for your help in advance everybody.

You can't run an ADC display with a VGA computer without a converter. Adapters won't do it.
a VGA to ADC converter will drive the ADC display directly
<http://www.gefen.com/kvm/product.jsp?prod_id=1301>
If you have the Apple DVI to ADC adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
you could use it with a VGA to DVI converter
<http://www.gefen.com/kvm/product.jsp?prod_id=1310>
It might be cheaper to get DVI graphics boards for the computers and use the Apple DVI to ADC adapter.
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
Your title says "Can I use the Apple ADC to DVI adapter with a VGA monitor?". If you want to connect a VGA monitor to a computer's ADC port you need the ADC to VGA adapter
<http://www.gefen.com/kvm/product.jsp?prod_id=1299> You can't use an ADC to DVI adapter followed by a DVI to VGA adapter, because the ADC to DVI adapter doesn't pass the analog video signals needed for VGA.

How can i use my custom login page in a custom partner application ?

Dear All,
I'm trying to customize a login page displayed other than the default sso login page
by submiting my form to the regular pl/sql procedure : "PORTAL.wwptl_login.login_url"
but i tried to type the requested partner application url in the browser i got the sso
login page other than my custom login page. So, How can i use my custom login page in a custom partner application ?
Regards,
Mohammed Amin
[email protected]

I cannot begin to express my level of frustration. I have been trying to use the composition widget light box display for some time now. I drag the widget to my document. The default widget has three small trigger boxes and a large area made up of a forward and backward button, a background, a text box and a frame for your image.
My steps have been …
I click on the little trigger box.
I click on the frame that holds the main image.
I go to the fill menu and browse my computer for my image and then click OK.
IT shows up on my screen. Yay
I attempt to continue using the next two trigger boxes provided in the widget.
After that, I add more by clicking on the little plus sign.
This is where all heck breaks loose.
Every single time I attempt to add thumbnails, something messes up. When I go to preview, either not all of my main images show up, or it starts with the wrong one, or some are missing. I have looked and looked for help on this and the only thing I can find is how easy it is to create a great portfolio lightbox display. But as we know, that only works when your thumbnails are the same image as the images in your lightbox. If you want something different, you have to use the composition wizard. I am finding it extremely difficult and confusing to customize.
Is there an exact sequence you need to use to add images to the slideshow? I am my wits end.

Can i use my airport extreme as a modem with comcast

can i use my airport extreme as a modem with comcast cable

No, since there is no modem on board an AirPort Extreme, so you will need to use an outboard modem if you want the AirPort Extreme to have Internet access.

I need to update my phone, but my computer broke, and do not have a new one. I have an Itunes account, can I use someone else computer to go through with the update? Is there a chance of loosing all my data, ie: music/photos?

I need to update my phone, but my computer broke, and do not have a new one. can I use someone else computer to go through with the update if i log on with my itunes account or Is there a chance of loosing all my data, ie: music/photos? And if all else fails can i go to the apple store and have them update my phone?

Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
Go to a friend, authorize that pc.
Read this : http://support.apple.com/kb/ht1848
and this : http://support.apple.com/kb/ht2519
Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically.

HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

Thanks Roger W1,
Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
Thanks,
Jay

How can I use Aperture 3 on my new iMac with Maverick?

How can I use Aperture 3 on my new iMac with Maverick?

Do you own a copy of Aperture, perhaps bought for another Mac?
If you have not bought Aperture, you need to buy it from the AppStore.
But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac. Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac. Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
Léonie

How can I use Drupal as a third party CMS with ATG E-Commerce Application?

Hi Friends,
We are planning to use a third party Freeware Content Management System (CMS) for web site content in ATG E-Commerce Application, instead of ATG content Administration or merchandising.
Can anybody please let me know how can I use a third party CMS(Eg: Drupal) with ATG E-Commerce Application?
Regards,
Krishna.

I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041. It compares Today to the vacation elig. date and if they match, set a time type indicator to 1. I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours. Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage. In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.

Can I use my Us iPhone 5s in Europe with a prepaid sim card while on vacation?

Can I use my Us iPhone 5s in Europe with a prepaid sim card while on vacation?

Only if the device is unlocked. Not all US devices are unlocked, as you probably know.

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

How can i use isight camera to broadcast to web with Mac OS 10.4?

I am using an iBook G4 running OS 10.4 as a printer server. I have to do this to be able to print on my HP DeskJet 882c printer from computers running OS 10.6 and above (although I have not been able to get it to work with 10.8).
I can connect an iSight camera to the iBook via FireWire. Can I set that up to broadcast a video feed to a web site so I can visually monitor the area near the laptop and printer?

jrmnewtonma wrote: How can i use isight camera to broadcast to web with Mac OS 10.4?
You could use compatible older versions of QuickTime professional extensions for your Mac OS X version.
This professional quality software is very powerful, and it will certainly stream any video you need. However, it is not simple to use, so be prepared to do some research and study to get it configured and working.
To use your iBook with its OS X 10.4, you will need QuickTime Broadcaster 1.5.3
and Darwin Streaming Server (v5.5.5) (if you need streaming server functions.)
Although I have never used it, QuickTime Streaming Server 4.1.1 might be a useable substitute for Darwin.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Can I use a non apple wireless hard drive with time machine?

Can I use a non apple wireless hard drive with time Machine?

Some NAS (network storage) systems do claim to support Time Machine, with varying levels of success. For example, the Synology units have this feature. They're not officially supported by Apple, though.
Matt

"Can I use Logic Pro in my new imac with 2.66 intel core 2 duo"

Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
I have a 002 rack from digidesign, that should be good running with a logic pro 8 DAW.

Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
Yes. Click here for more information.
(40435)

I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

Software Update?

Can I use my custom board with LPC2378 processor with ULINK2 on Embedded module for ARM and LV.

Similar Messages

Maybe you are looking for