Can I use my electric piano on GarageBand
Can I use my electric piano on GarageBand?
What cables do I use?
What do I click on in the app?
If you want to learn to play the piano, there are some downsides to using synthesizers or Midi controllers that do not have weighted keys. The reason is that the weight and resistance of real piano keys require your fingers to develop strengths that you will not have by learning to play on a keyboard with plastic, unweighted keys. Having said that, you can learn the basics of how to play, in terms of learning how to put chords together and understanding scales, but it will be a whole different ball game if you actually try to play a real piano after playing on non-weighted keys; essentially, you will have to spend time developing the strength and agility in your fingers. So, it can be a good plan to learn by going the cheap and (small size) route by getting an unweighted keyboard, but if you really like playing the piano and want to continue on, then at some point, you need to get something with weighted keys--either a good synthesizer or electric piano, or the real thing (spinet, upright, baby grand, or grand).
Regards and Sever the Proverbial Appendage.
Joyce
Similar Messages
-
I'm using my electric guitar with GarageBand. With the input/output jack being full of my guitar cord, does anyone know if I can rig a BlueTooth™ speaker for output? Thanks in advance for any response.
yes this will work
you can also get a splitter cable that goes in to your in/out port so you can have 2 (or more) separate ports -
Can i use my apple remote with garageband 11?
Can I use my apple remote to start/stop recording in GB11?
Thanks for any help
PCMattamattamatt says it works:
https://discussions.apple.com/message/15230663#15230663 -
How can i use 2 usb mics in garageband?
Hello I am trying to use 2 Headsets for podcasting in Garageband.
I want them both on different channels.
I can not figure out how to set this up.
Can U help me?
thxhelaron wrote:
I am trying to use 2 Headsets for podcasting in Garageband.
create an aggregate device for them:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)
helaron wrote:
I want them both on different channels.
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Can't hear my electric guitar in garageband, I've read all prior posts-.
And I want to play sooooo bad!!
Here's my set up:
(input) USB to 1/4 jack to guitar
(headphone output) 1/8 to 1/4 to guitar amp (I can hear anything else on my MBP through the amp)
Preferences: Audio/MIDI- Output is set to built in
Input set to USB
Input Source is Mono 1 track link USB interface
Monitor ON
I can see my noise in the green, but hear nothing.
What am I missing here?kendo59 wrote:
I've currently got it set in preference as "Built in input" where is says Audio Input.
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
(Let the page FULLY load. The link to your answer is at the top of your screen) -
How to connect my electric piano to my mac book pro
Hi,
Can anyone tell me what I would need in order to connect my electric piano to my mac book pro?
I would like to record stuff in Garage band using my electric piano.
I have no idea what cables or equipment I would need, so any help would be much appreciated.
The piano I've got is a KORG EC120 and it has MIDI IN/OUT and a couple of LINE INPUTS (Though I am not familiar what to do with them! )
http://www.harmonycentral.com/t5/News/Korg-Introduces-EC-120-Concert-Piano/ba-p/ 34631250
The mac book I like to hook it up to is a 13" Mac Book Pro (early 2011).
Thanks!There are many ways to do this but do yourself a favor and pick up a usb audio/midi interface. This will let you get either the keyboard voices or Midi input (computer Midi voices) into garageband along with microphone or other instruments if you want in the future.
You will also need a cable to connect the keyboard to the interface. -
Can I use garageband with my electric piano?
I have a Yamaha electric piano. Can I connect to it via camera connection kit and garageband?
Thanks,
MrWDiPad: Using iPad Camera Connector with unsupported USB devices
http://support.apple.com/kb/ht4106
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom -
What can I do to change the sound of a track in garageband? It is "stuck" on electric piano setting and will not change. I've tried restarting, restoring sound library, full key reset, and checked for updates.
Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W -
Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor MarkPort Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course. -
Just updated to '09 and can't use Garageband at all
I keep getting error messages that say "required software extensions are missing" and "garageband has detected a possible conflict between one or more third party MIDI or audio drivers." I don't have additional drivers anywhere, and I'm pretty sure the upgrade from the iLife 09 DVD was complete.
If gb does manage to fire up, I can't use it at all. I click on one thing and the multicolored ball spins for two minutes. I've tried restarting, doesn't help.
Anyone know what's going on?Rae78 wrote:
isteveus, yep, I'm using 10.5.6. MattiMattMatt, thank you for the suggestion--I took out the two GB-related files I found in preferences (com.apple.garageband.cs & com.apple.garageband.plist) and repaired permissions (which took about an hour...is that normal?).
Still having the same problems. Any other troubleshooty things I can try?
Just to confirm: when you removed the preference files, did you throw them out? It's probably a long shot, but just to make sure, you should throw them all the way out.
Repairing permissions does take longer in Leopard than it used to in Tiger, although an hour sounds like a long time even for Leopard, (after all that time, I hope it at least found a few permissions it could repair).
Other than that, if you're sure you didn't install any other drivers, perhaps it needs to be uninstalled and reinstalled (just guessing)? -
Whether PXI can be used for Event data logging in an electrical Substation ?
Whether the NI PXI system can be used for recording digital event data with 1 ms accuracy ?Whether its DI boards support onboard timestamping ? Whether PXI can be synchronized with time pulses from a GPS receiver ?
Yes indeed, there is a digital event recorder example in developer zone, search for "digital time interval" on NI developer zone, or follow this link: http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3DCA356A4E034080020E74861&p_node=DZ52336&p_submitted=N&p_rank=&p_answer=&p_source=External
In addition, we have done additional work to create a template for the LabVIEW FPGA, http://sine.ni.com/apps/we/nioc.vp?cid=11829〈=US
which has 96 digital I/O lines as well as 8 analog in. With the NI-7831R you are able to combine analog and digital events in the electrical substation.
Further, using PXI, we can synchronize with a GPS time stamp such as IRIG-B, and perform these functions all in a headless - real-time OS LabVIEW.
I woul
d be happy to discuss your application in more detail and offer a complete solution, or a recipe to create the solution yourself.
Thanks for the question,
Preston Johnson
Business Development Manager - Industrial Applications
National Instruments
512-683-5444
[email protected]
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444 -
IPhone 5 same electrical charger can be use abroad ?
Hi,
I purchased iPhone 5 on December 2012 in USA.
I am going for a trip to Singapore, Malaysia and Bangkok. My question is " Can I use the same Electrical charger to charge my iPhone 5 in those countries or do I need to buy an external adapter or kind of " ?
Please suggest.
Thanks in advance for your reply.you only need a plug adapter. the Apple charger is universal.
-
Can I use my old Ensoniq ASR10 with GarageBand?
Hello:
My trusty M-Audio Keystation 49e has given up the ghost (the keys don't send MIDI signals anymore). I've tried hitting it with a hammer but, alas, to no avail.
I have made sacrifices at the altar of MIDI Monitor, etc, but the gods will not be appeased,
Oh well.
Anyway, I dusted off my ancient Ensoniq ASR10 (it performed miracles back in the day) and am now wondering if I could use this as a MIDI controller in GarageBand. By this I mean can I use it to replace the M-Audio Keystation and play the various instruments, etc. in Garageband? Buying an M-Audio MIDI to USB adapter is a lot cheaper than buying a new M-Audio Keystation (or a even a used one). But I want to be assured it will work first before I spend the dosh.
The Ensoniq ASR10 has a standard MIDI In, Out and Thru.
So please, anyone, any thoughts?
Thanks
Message was edited by: Verityslice
Message was edited by: VeritysliceMIDI is MIDI, regardless of what device sends it. as long as the interface you buy is compatible with your OS version, it'll work, if the keyboard works.
-
Can I use the Garageband app for iPad to create a new ringtone for my iPhone 4?
I want to create new ringtones for my iPhone, and consulting Support, they explain how to do that using Garageband 9.0, but I want to know if the Garageband app for iPad can be used to do the same thing or not. The iPad uses iOS 4.3.3.
Would you be composing the ringtone in garageband or taking existing material and editing it? You could create something but then you would have to send to iTunes and format it as a ringtone there I believe
-
How can i use the amp designer or pedalboard for software instruments in garageband 10
how can i use the amp designer or pedalboard for software instruments in garageband 10?
and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?hongconga wrote:
I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
DRIVERS::
No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
(note "supported")
and
For the Mac::
Mac OS X 10.4.11 – 10.7.1
ask if their firmware currently supports OS X 10.9.x
Maybe you are looking for
-
My sister and I share an itunes account so she can click on my email and receive my imessages how can I make sure this stops happening?
-
Need to update custom fields in MSEG table using "BAPI_GOODSMVT_CREATE"
Hi All, There is a requirement to update custom fields in table MSEG which are part of append structure. There is a option to update the custom fields using the one of the tables parameters "EXTENSIONIN". Anyone please advice how can I update the cus
-
How to format and hard reset N79? *#7370# does onl...
Hi! I tried to format my Nokia N79 with *#7370# but all applications and contacts ect are still there. Is there a way to complettly reset and format the phone? Solved! Go to Solution.
-
Save for Web... and grayscale images
I noticed a strange behavior when I use "Save for Web and Devices" on scanned BW negatives... I import the negatives via the scanner's twain driver in Photoshop as 16bit grayscale images. My grayscale working space is normally set to the default DotG
-
SQL LIKE statement to text field fomr CF MX 6.1
Hi. Here's my scenario. I am running SQL Server 2000 SP4 on a Windows 2003 Server running IIS 6. Using ColdFusion MX 6.1 Updater version. I am storing HTML page code (some complete, some just clips) in a text type field. I need to check to see if som