Can I use my epson sx425w stylus wireless printer with my macbook air?? if so how do I link it as Im struggling to get it connected wirelessly

Ive recently bought a macbook air and have an epson sx425w wireless printer which has been excellent
when used with my previous laptop and im reluctant to purchase another when its in perfect
working order, I just cant seem to link it to my macbook for some reason, I cant find my instruction
manual for the printer but do remember it was fairly straight forward linking it to my lap top
before?!
hoping someones had similiar problem and has a resoloution !! help please

I checked the Epson (U.S.)  website, and found nothing at all about this model printer - no support, drivers, etc.
I also checked Apple's websites, and found they do offer support for the SX420W.
Maybe this will solve it:
http://support.apple.com/kb/PH14143

Similar Messages

  • Can I use an apple keyboard and track pad with my iPad Air?

    How do I use my apple keyboard and track pad with my iPad Air?

    I did all that you suggest before and it didn't work.  So I waited a bit and tried again and it finally worked.  Not sure what the problem was as I didn't do anything differently.
    Thank you for all your help.

  • HT4614 Can I use Thunderbolt to Thunderbolt cable to copy from one macbook air to another?

    Can I use Thunderbolt cable to copy from one Macbook Air to another Macbook Air?

    Of course, but you will have to start one of the Macs into Target Disk Mode, pressing T key while the Mac is starting with the Thunderbolt cable connected, so the MacBook Air in Target Disk Mode will appear on the Finder sidebar of the other Mac as an external disk, so you can copy and transfer files from and to it

  • Can I use an app already purchased for iMac on new MacBook Air?

    Can I use an app already purchased for my iMac on a new (yet to be purchased) MacBook Air?

    Thanks, Niel.  As a follow-up, I need to know if I can also use the same app on a new iPhone and/or a new iPad.

  • Canon Wireless Printer Setup on MacBook Air without Super Drive access

    I just bought a Canon Pixma MX 920 Printer and can't figure out how to install the wireless setup and the printer drivers without using the startup CD as I don't have access to a Super Drive.  I have a 3 month old Mac Air using Mountain Lion and I'm also trying to set this up on an older Mac Air. The Canon website has been no help at all.  I'm installing this for a family member while visiting from out of state so I'd like to do this before I leave Monday.  Suggestions?

    You can download Apple's drivers:
    Apple Canon Laser Printer Drivers 2.0
    Apple Canon Printer Drivers 2.11
    You can also go to Canon's support site to locate and download drivers for specific printers.

  • Why can't I setup my HP Photosmart C4580 Printer with my Macbook?

       Okay, first of all, I've got to say that this has to be one of the most troublesome pieces of computer hardware that I've ever had the misfortune of running across. The only thing that keeps me from going all "Office Space" on it, (as another frustrated user put it) is that I've had the printer since I got my Macbook in late 2008, and there have been huge stretches of time when it has worked more or less perfectly. However, each time I update my OS, or try to add the printer to a new computer, all **** breaks loose. This latest time has really taken the cake- as I've been messing with it consistently for several weeks and have not been able to use it at all.
       I guess it began when I upgraded to OS X Snow Leopard around April. Prior to this the wi-fi printing had worked fine, but after this upgrade for some reason I could only print with the USB connected. Then, about a month ago I upgraded to OS X Lion, and I'm still unable to get the wi-fi printing to work.
       The point I'm at now, is that I've downloaded what I believe to be the appropriate HP setup utility package, and went through that all the way through where it sets up the wireless functionality of the printer and it says to go to 'Print & Fax' in System Preferences and add the printer. So I do that, and I get to this point:
    Setting up 'Photosmart C4500 series
    [F559E3]...'
    Software for this printer is available from Apple.
    Would you like to download and install it?
    ... where I obivously click "Download and Install". At this point, I get a dialog that says "Finding software" for several minutes, and then says:
    Setting up 'Photosmart C4500 series
    [F559E3]...'
    The software for this printer is currently unavailable.
    Please contact the printer's manufacturer for the
    latest software.
    ... at this point the only option is "Cancel", and when I click that, I'm left with no printers in my list of printers. Likewise, if I don't click "Download and Install on the previous screen, it cancels the setup.
    This leads me to believe that it may actually be an issue with Apple instead of HP at this point, but I'm not sure. Likewise, I've tried other options such as setting up the printer by it's IP address and by something called an HP Jetdirect - Socket, but those methods were unfruitful.
    I feel like I should note that, when I go to "Add Printer", I'm presented with a list of both the USB connected version of my printer, and the "Bonjour Multifunction" version (wi-fi). So it seems that the computer is having no trouble at least detecting the printer, which has been a problem for me in the past.
    Any help would be very much appreciated.

    Despite HP's statement that 10.7 is supported for the Photosmart C4580, there are no drivers for this.  I spoke to their Support Line and basically you need to buy a new printer.  Wow!  Wish I had known that before I upgraded to Lion. 
    HP does have a Trade-In and Trade-Up program.  Sounds like the newer model printers will also handle the AirPrint for your iPhone and iPads.

  • I am on Lightroom 4 and using a Epson photo stylus R300 printer and cannot seem to put Hahnemuehle paper profiles on to it, anyone know how?

    Anyone know how to put paper profiles onto a Epson R3000 printer via Lightroom 4?

    Installation using Mac OS:
    1. Double-click on the downloaded Zip-file. The ICC profile will be extracted in the same folder automatically.
    2. Now move the extracted ICC profile to the proper folder listed below.
    Mac OS 8-9x - System Folder > Color Sync Folder
    Mac OS X - HD > User > Library > ColorSync > Profiles
    Note: Please restart your graphics application (eg photoshop) if it was open during the profile installation.

  • Dyndns requires directx , can i use something different as directx not compatible with my macbook

    I have a personal video surveillance system which runs on my old Dell using windows with directx
    I have my wonderful new MacBook..but cant use directx...is there a plugin to run the directx on the macbook...or perhaps an equiavalent program which will allow me to access the information?
    Thanks for any help you can provide
    campbema

    http://support.apple.com/kb/DL1575

  • Can I use two 4GB SO DIMM DDRIII 1333 with my MacBook Pro Mid 2010???

    Hello you guys.
    I am working with a Mid 2010 Macbook Pro 2,53 GHz Intel Core i5, 4 GB 1067 MHz DDR3 an want to upgrade RAM to 8GB.
    Can or should I use two 4GB SO DIMM DDRIII 1333 Units, or will that kill my Book and I better use two 1066 Units?
    Can also someone recommend a fabric that works best?
    Thanks in advance,
    Philip (Germany)

    Have just upgraded my Macbook Pro 6,2 from the original 4 GB to 8 GB. The replacement RAM specifies 1333 MHz on the box, together with a smiley Mac face, and it works great, although at the lower bus speed as you would expect.
    This is what the vendor site states:
    Strontium 4G Single Notebook SO Dimm DDR3 1333,204 Pins For Mac ( SRA4G86S1-H9H )
    Memory Slots:
      ECC:          Disabled
    BANK 0/DIMM0:
      Size:          4 GB
      Type:          DDR3
      Speed:          1067 MHz
      Status:          OK
      Manufacturer:          0x8783
      Part Number:          0x5352413447383653312D4839482020202020
      Serial Number:          0xED480B00
    BANK 1/DIMM0:
      Size:          4 GB
      Type:          DDR3
      Speed:          1067 MHz
      Status:          OK
      Manufacturer:          0x8783
      Part Number:          0x5352413447383653312D4839482020202020
      Serial Number:          0xC4450B00

  • Can I use Time Machine to sync my Imac with my Macbook Pro?

    Is it possible to maintain my hard drives in sync using Time Machine?

    No. TM is machine specific and is not ideal for syncing machines. You need syncing software or MobileMe. MobileMe has a 2 month free trial. Oh, cloning software of specific files may work as well depending on what you are syncing.
    [www.apple.com/mobileme>

  • Epson RX620 will not print with my MacBook Pro. Error:/ System/Library/ Pri

    I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri... can anyone help?

    skeeter694 wrote:
    I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri...
    Welcome to Apple's discussion groups.
    What's the rest of that error message? Posting what you did is similar to posting as an error message the text "I'm having trouble with ..." with nothing following.
    I'd try several things until things work:
    1) Open the Print & Fax panel of System Preferences. Right-click on a printer entry and choose "Reset printing system".
    2) Delete the entry for your printer, then add it back.
    3) Check the Epson Web site for a recent driver for your printer. Download it, then first run it in "uninstall" move, then in "install" mode.
    I'll be personally interested in what you learn. I have a relative who has an RX620 and 10.6.4, but I'm not sure he's tried to print anything yet.

  • HT1218 do you have to have a wireless router with the macbook air

    do you have to have a wirelss router with the macbook air if you do not have internet in your home

    If you do not have internet at home - MacBook Air works perfectly fine offline.
    It is advisable to connect it to the internet ocasionally to update it.

  • What is the best projector to use with a macbook air

    Need a trouble free projector to use with my macbook air for showing photos and business documents , excel eyc.

    If you don't mind connecting the projector directly to the Mac with an HDMI cable, any projector with an HDMI input will work. There are a very large variety to choose from. Projector People is a competent vendor that I have used and can recommend. They are knowledgeable about Macs. Describe your needs and they will make recommendations. Their prices are as good as you are likely to find anywhere else.
    You will also need a Thunderbolt to HDMI adapter. Purchase one from Monoprice. They are less than $10.

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1

    How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
    I am not able to see the scanner in photoshop. 

    Are you using a mac or windows? And what version?

Maybe you are looking for

  • I got a new MacBook pro and want to install my lightroom and elements 11.

    I uninstalled both programs on my old computer and this computer were set to factory setting and sold. When I try to install on my new computer - after informing my serial numbers, I get the answer, that this number is not correct. II of course check

  • Sum columns in datagrid

    Hi All, I have a DG with multiple columns (Numbers), the values are coming from an array collection. What is the best way to sum couple columns? like Column01 + Column02 = ColumnTotal I try using a labelFuction in the column like: private function su

  • Configuration file locations with the FDK

    Is there a way to determine the directory a DLL created from the FDK is loaded from? I need to persist some data assocaited with my DLL and figured putting a file in the same directory would be the most logical place to put it. It also  guarantees th

  • Query Display

    Hi all Some how, every time i run my query I'm getting the TTITLE values being displayed twice. I have turned almost everything off as far as I know TTITLE OFF BTITLE OFF CLEAR BREAKS CLEAR COLUMNS CLEAR COMPUTES SET FEEDBACK OFF SET TERMOUT OFF SET

  • Keywords iphoto 11

    I just found the discussion that ran through much of last year, about the problem of keywords not appearing under thumbnails in iphoto 11. This solves a mystery for me, I thought I had lost my keywords in the move from an older computer. I see a soft