Can I use my G5 on the web without antiviruses ?

Hi guys and girls,
Could you tell me if I can use my G5 on the web without antiviruses ?
If you are disagree, please tell me which antiviruses is the best for you ?
Thanks.
Philippe

Welcome to the Apple Discussion Forum!
Currently no internet virus protection is needed for Apple OSX. Using Safari or Firefox is the best way to access the internet.
In addition, make sure you download and install all Apple Security updates (from the Software updates tab). This will keep your MacOSX protection up to date. In addition, there are only three Anti-Virus software programs available from the Apple store, that alone will give you a clue to the need for them.
Regards,
Dave

Similar Messages

Can you put Forms 6 on the web without OAS?

Do you have to use the Oracle Application Server if you want to put Forms 6 applications on the web?
Is it possible to configure webforms system without using OAS?
We use Microsoft IIS webserver and plan to use the CGI-BIN interface to put oracle reports on the web.
Thanks.
null

Bob,
I have been watching this discussion group now for some time and I have noticed that you are answering a lot of questions about Oracle Developer, mostly correctly.
However, your experiences with Netscape and Jinitiator seem a little unfortunate, you (and others) may find the following information useful
The problem you have referred to where the form does not appear was a known problem both with Jinitiator 1.1.5.21.1 and the original shipment of forms 6.0.5.29.1. This problem is usually fixed (depending on what was the root of your problem) by upgrading past patch 3 of ODS6 and upto Jinitiator 1.1.7.18.
There are other reasons that the form may not appear but these are usually flagged by an FRM-99999 error. Not overly helpful I understand, but drilling in on the java console window that pops up will usually point out the area of the problem. We realise that this is not necessarily as helpful as it could be and we will be shortly posting a document (to the tune of 121 pages) where a lot of the FRM-99999 errors are explained and a method for troubleshooting is outlined.
The following configurations can be used for running ODS
Netscape 4 + Jinit
IE 4/5 + Jinit
IE5 incl Patch 1 Native
Appletviewer
In answer to the question from Richard Chadd you can happily run ODS6 without OAS, as Bob correctly points out, if you don't want to use the cartridge.
The cartridge is needed if you want to deploy your Forms Server application across multiple machines, the reason for this is that the cartridge (in v6) is the only method for accessing a variable called LEASTLOADEDHOST, this variable is used to indicate to the Metrics Server (the element inside ODS that manages the connections on each machine) the number of concurrent connections on each machine.
If you are happy running on one machine (from a user count and hardware point of view) then you will not need to do load balancing and therefore will not need to use OAS.
With the latest release of Oracle Forms Server release 6i (note the name change) you will never need OAS, even if you want to load balance. We will be supplying a CGI executable that provides the same (and more) functionality as the OAS cartridge, thus you will be able to deploy your OFS applications to multiple machines and still stick with your favourite web server.
The other features we have added in 6i are
- Smart Server Install
- SSL
- HTTP
- OEM Integration
For full details you should download the product details from Technet, but in short the smart server install should resolve a lot of the problems that we are seeing on this (and other) discussion lists. It basically asks a series of questions and (based on your answers) chooses to install and set up it's own lightweight listener (taken from WebDB) and creates the base html files, the virtual directory mappings etc etc.
The HTTP is the same as was in 6.0 but is now a supported feature as opposed to being a beta feature, you may now optionally choose to switch on SSL for that communication as well.
The OEM integration refers to Oracle Enterprise Manager, you may now install an agent on an OFS box and the agent will report to OEM that OFS is installed and will thus allow you to start and stop forms listeners, dynamically turn on logging, kill users etc etc all remotely.
Sorry if this seems like a marketing message, but I thought you might like a heads up on what is now available.
I also thought that you might like to know that we in Product Management spend a large amount of time watching discussion groups and newsgroups.
If you are looking to discuss OFS with other like minded users then there are also several other places that Product Management may be seen, these are comp.databases.oracle.tools and the ODTUG mailing list.
Obviously the newsgroups are free, but ODTUG requires you to purchase a membership.
Jason Pepper
Oracle Enterprise Internet Tools
Product Management

HT2589 how can i use apple id in the iTunes without credit card

i created an apple id but i can't use it in the Itunes and apple store because i don't have a credit card i don't have money to buy application i want just the free ones what sould i do !!!!!

If you only want the free apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

How can i open pdf files from the web without saving them

Windows 7
Firefox 5
Adobe Reader 9
when i want to see a web based pdf file i have to save it before opening it instead of it just opening in a pdf window.

You can't.
Those PDFs are only accessible on the Mac.
They can not even be accessed by iOS.

Can I use oracle9i to deploy the BC4J without using oracle9ias

I found many components in oralce 9i similar to those,for instance apache server, in oralce9i applcation server
I want to know what defference is between oralce 9i and oralce9i applcation server

Nope. You need the Oracle9iAS J2EE container (OC4J) to deploy BC4J/J2EE applications.
This is a part of 9iAS. 9i is now the brand name for all products to identify a particular version e.g. 9i Database, 9i Appliaction Servers, 9i JDeveloper, etc.
regards
Debu Panda

Use remote panel on the web after bulid executable application(*.exe)

Dear All
i have a vi with using remote control on the web.
But how can i use remote control on the web after bulid executable application(*.exe)
maybe add someting to installer or ............

A simple search for "executable LabVIEW web" should generate some relevant results.
Try to take over the world!

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@

yes,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How can I use applet to get the desktop image of client

hi,I have a question to ask u.
How can I use applet to get the desktop image of client? Now I develop a web application and want user in the client to get his current image of the screen.And then save as a picture of jpeg format ,then upload it to the server?
I have done an application to get the screen image and do upload file to server in a servlet with the http protocal.

Since the desktop image is on the client's local hard drive, you'll need to look at trusted applets first.

Form fields in LiveCycle. I want to allow users to add URLs to a form so that they can be clicked and opened on the web by form reviewers (users). what is the best way to achieve this?

Form fields in LiveCycle. I want to allow users to add URLs to a form so that they can be clicked and opened on the web by form reviewers (users). what is the best way to achieve this?

Once the user has entered the URL they want to add to the form. You can use the loadXML function to implement some special text in a label...
var linkValue = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><exData contentType=\"text/html\" xmlns=\"http://www.xfa.org/schema/xfa-template/2.8/\"><body xmlns=\"http://www.w3.org/1999/xhtml\" xmlns:xfa=\"http://www.xfa.org/schema/xfa-data/1.0/\" xfa:APIVersion=\"Acroform:2.7.0.0\" xfa:spec=\"2.1\">The new link the user have entered is:<a href=\"" + textfield.rawValue + "\">textfield.rawValue</a></body></exData>";
this.resolveNode("lblURL").value.exData.loadXML(linkValue, 1, 1);

How can WLS use JSP pages in a Web Application witth just a JRE [Web Application, WAR, JSP, weblogic.jsp.pageCheckSeconds and JRE]

 How can WLS use JSP pages in a Web Application (either a .war file or a war directory structure) without a java compiler?
 I suspect either the JSP specification is flawed (i.e. it doesn't take account of servers using just a JRE), or BEA's implementation is broken.
 Production servers do not have a JDK installed. They only have a JRE. Therfore a java compiler is not present on the machine that the Web Application is deployed onto.
 On the development machine, when the server is requested to load the JSP it creates a tmpwar directory within the Web Application directory structure. This is then included in the resultant .war file thus:
 D:\war>jar -tf gmi.war
 META-INF/
 META-INF/MANIFEST.MF
 gmiService.jsp
 WEB-INF/
 WEB-INF/classes/
 WEB-INF/classes/com/
 WEB-INF/classes/com/bt/
 WEB-INF/classes/com/bt/gmi/
 WEB-INF/classes/com/bt/gmi/gmiService.class
 WEB-INF/getList.xsl
 WEB-INF/getListByConnection.xsl
 WEB-INF/getListByDistrict.xsl
 WEB-INF/getListByDistrictConnection.xsl
 WEB-INF/lib/
 WEB-INF/source/
 WEB-INF/source/build.bat
 WEB-INF/source/gmiService.java
 WEB-INF/web.xml
 WEB-INF/weblogic.xml
 tmpwar/
 tmpwar/jsp_servlet/
 tmpwar/jsp_servlet/_gmiservice.class
 tmpwar/jsp_servlet/_gmiservice.java
 When deployed on the production server with the web.xml file set to use the following values (note XML stripped):
 weblogic.jsp.pageCheckSeconds
 -1
 weblogic.jsp.precompile
 false
 weblogic.jsp.compileCommand
 javac
 weblogic.jsp.verbose
 true
 weblogic.jsp.packagePrefix
 jsp_servlet
 weblogic.jsp.keepgenerated
 false
 And in the weblogic.properties file:
 weblogic.httpd.webApp.gmi=war/gmi
 I've also tried with the .war file, but that insists on creating another tmpwar directory outside of the .war file.
 Then, although I have set pageCheckSeconds to -1 (don't check and don't recompile) ter production server still attempts to recompile the JSP's:
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: init
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param verbose initialized to: true
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param packagePrefix initialized to: jsp_servlet
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param compileCommand initialized to: javac
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param srcCompiler initialized to weblogic.jspc
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param superclass initialized to null
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param workingDir initialized to: /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param pageCheckSeconds initialized to: -1
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: initialization complete
 Mon Sep 25 11:40:12 BST 2000: <WebAppServletContext-gmi> Generated java file: /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.java
 Mon Sep 25 11:40:14 BST 2000:<E> <WebAppServletContext-gmi> Compilation of /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.java failed: Exception in thread "main" java.lang.NoClassDefFoundError: sun/tools/javac/Main
 java.io.IOException: Compiler failed executable.exec([Ljava.lang.String;[javac, -classpath, /opt/Solaris_JRE_1.2.1_04/lib/rt.jar:/opt/Solaris_JRE_1.2.1_04/lib/i18n.jar:/opt/Solaris_JRE_1.2.1_04/classes:/var/wls/5.1/weblogic/lib/weblogic510sp4boot.jar:/var/wls/5.1/weblogic/classes/boot:/var/wls/5.1/weblogic/eval/cloudscape/lib/cloudscape.jar:/var/wls/5.1/weblogic/lib/wleorb.jar:/var/wls/5.1/weblogic/lib/wlepool.jar:/var/wls/5.1/weblogic/lib/weblogic510sp4.jar:/var/wls/5.1/weblogic/license:/var/wls/5.1/weblogic/classes:/var/wls/5.1/weblogic/lib/weblogicaux.jar:/opt/wls-servers/gmiServer/weblogic/gmiServer/serverclasses:/opt/wls-servers/gmiServer/weblogic/lotusxsl.jar:/opt/wls-servers/gmiServer/weblogic/xerces.jar:/opt/wls-servers/gmiServer/weblogic/logging.jar::/opt/wls-servers/gmiServer/weblogic/war/gmi/WEB-INF/classes:/opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war, -d, /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war, /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.java])
 at java.lang.Throwable.fillInStackTrace(Native Method)
 at java.lang.Throwable.fillInStackTrace(Compiled Code)
 at java.lang.Throwable.<init>(Compiled Code)
 at java.lang.Exception.<init>(Compiled Code)
 at java.io.IOException.<init>(Compiled Code)
 at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(Compiled Code)
 at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:200)
 at weblogic.servlet.jsp.JspStub.compilePage(Compiled Code)
 at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:173)
 at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:187)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:142)
 at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:744)
 at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:692)
 at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:251)
 at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
 at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
 at weblogic.kernel.ExecuteThread.run(Compiled Code)


The default Java compiler from sun lives in the tools.jar that comes with
 the JDK. Just add that to your set of JARs which are deployed in production
 and you should be fine. No need to install the full JDK - just make the
 tools.jar available to WebLogic.
 Regards
 James
 James Strachan
 =============
 email: [email protected]
 web: http://www.metastuff.com
 "Martin Webb" <[email protected]> wrote in message
 news:[email protected]...
 >
 > How can WLS use JSP pages in a Web Application (either a .war file or a
 war directory structure) without a java compiler?
 >
 > I suspect either the JSP specification is flawed (i.e. it doesn't take
 account of servers using just a JRE), or BEA's implementation is broken.
 >
 > Production servers do not have a JDK installed. They only have a JRE.
 Therfore a java compiler is not present on the machine that the Web
 Application is deployed onto.
 >
 > On the development machine, when the server is requested to load the JSP
 it creates a tmpwar directory within the Web Application directory
 structure. This is then included in the resultant .war file thus:
 >
 > D:\war>jar -tf gmi.war
 > META-INF/
 > META-INF/MANIFEST.MF
 > gmiService.jsp
 > WEB-INF/
 > WEB-INF/classes/
 > WEB-INF/classes/com/
 > WEB-INF/classes/com/bt/
 > WEB-INF/classes/com/bt/gmi/
 > WEB-INF/classes/com/bt/gmi/gmiService.class
 > WEB-INF/getList.xsl
 > WEB-INF/getListByConnection.xsl
 > WEB-INF/getListByDistrict.xsl
 > WEB-INF/getListByDistrictConnection.xsl
 > WEB-INF/lib/
 > WEB-INF/source/
 > WEB-INF/source/build.bat
 > WEB-INF/source/gmiService.java
 > WEB-INF/web.xml
 > WEB-INF/weblogic.xml
 > tmpwar/
 > tmpwar/jsp_servlet/
 > tmpwar/jsp_servlet/_gmiservice.class
 > tmpwar/jsp_servlet/_gmiservice.java
 >
 > When deployed on the production server with the web.xml file set to use
 the following values (note XML stripped):
 >
 > weblogic.jsp.pageCheckSeconds
 > -1
 >
 > weblogic.jsp.precompile
 > false
 >
 > weblogic.jsp.compileCommand
 > javac
 >
 > weblogic.jsp.verbose
 > true
 >
 > weblogic.jsp.packagePrefix
 > jsp_servlet
 >
 > weblogic.jsp.keepgenerated
 > false
 >
 >
 > And in the weblogic.properties file:
 >
 > weblogic.httpd.webApp.gmi=war/gmi
 >
 > I've also tried with the .war file, but that insists on creating another
 tmpwar directory outside of the .war file.
 >
 >
 > Then, although I have set pageCheckSeconds to -1 (don't check and don't
 recompile) ter production server still attempts to recompile the JSP's:
 >
 >
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: init
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 verbose initialized to: true
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 packagePrefix initialized to: jsp_servlet
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 compileCommand initialized to: javac
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 srcCompiler initialized to weblogic.jspc
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 superclass initialized to null
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 workingDir initialized to:
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 pageCheckSeconds initialized to: -1
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp:
 initialization complete
 > Mon Sep 25 11:40:12 BST 2000: <WebAppServletContext-gmi> Generated java
 file:
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.
 java
 > Mon Sep 25 11:40:14 BST 2000:<E> <WebAppServletContext-gmi> Compilation of
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.
 java failed: Exception in thread "main" java.lang.NoClassDefFoundError:
 sun/tools/javac/Main
 >
 > java.io.IOException: Compiler failed
 executable.exec([Ljava.lang.String;[javac, -classpath,
 /opt/Solaris_JRE_1.2.1_04/lib/rt.jar:/opt/Solaris_JRE_1.2.1_04/lib/i18n.jar:
 /opt/Solaris_JRE_1.2.1_04/classes:/var/wls/5.1/weblogic/lib/weblogic510sp4bo
 ot.jar:/var/wls/5.1/weblogic/classes/boot:/var/wls/5.1/weblogic/eval/cloudsc
 ape/lib/cloudscape.jar:/var/wls/5.1/weblogic/lib/wleorb.jar:/var/wls/5.1/web
 logic/lib/wlepool.jar:/var/wls/5.1/weblogic/lib/weblogic510sp4.jar:/var/wls/
 5.1/weblogic/license:/var/wls/5.1/weblogic/classes:/var/wls/5.1/weblogic/lib
 /weblogicaux.jar:/opt/wls-servers/gmiServer/weblogic/gmiServer/serverclasses
 :/opt/wls-servers/gmiServer/weblogic/lotusxsl.jar:/opt/wls-servers/gmiServer
 /weblogic/xerces.jar:/opt/wls-servers/gmiServer/weblogic/logging.jar::/opt/w
 ls-servers/gmiServer/weblogic/war/gmi/WEB-INF/classes:/opt/wls-servers/gmiSe
 rver/weblogic/war/gmi/_tmp_war, -d,
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war,
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.
 java])
 > at java.lang.Throwable.fillInStackTrace(Native Method)
 > at java.lang.Throwable.fillInStackTrace(Compiled Code)
 > at java.lang.Throwable.<init>(Compiled Code)
 > at java.lang.Exception.<init>(Compiled Code)
 > at java.io.IOException.<init>(Compiled Code)
 > at
 weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(Compiled Code)
 > at
 weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:200)
 > at weblogic.servlet.jsp.JspStub.compilePage(Compiled Code)
 > at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:173)
 > at
 weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:18
 7)
 > at
 weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
 :118)
 > at
 weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
 :142)
 > at
 weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
 l.java:744)
 > at
 weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
 l.java:692)
 > at
 weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
 Manager.java:251)
 > at
 weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
 > at
 weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
 > at weblogic.kernel.ExecuteThread.run(Compiled Code)
 >
 >
 >

HT1711 dear sir i made a video to my brother in his wedding day from his photo and i use a song i buy it from itunes as a soundtruk , can i use this video in the facebook

dear sir i made a video to my brother in his wedding day from his photo and i use a song i buy it from itunes as a soundtruk , can i use this video in the facebook

No. Tracks you purchase from the iTunes Store are for your personal use only and cannot be posted, either separately or as part of a video or slide show, on any public web site or otherwise distributed to others in any way. You can't even legally give that video to your brother.
Regards.

FAQ: Can I share on the web without sharing to Facebook?

FAQ: Can I share on the web without sharing to Facebook?
Answer:
Yes, GroupPix has a web-sharing feature built in. However, only the owner of the GroupPix Event can control whether it’s shared or not. If you go into the GroupPix Event settings, and scroll to the bottom, you see the option to share the album. Copy the URL and email it to a friend, or put it into any web browser to see the online album.
Note: If you created a GroupPix Event, then use the Share feature to email a link to the album, it automatically enables web sharing for you. Then, it generates an email with a link to that album, which you can send to others.

No, purchased iBooks can only be read on the iPad. Of course, purchased Kindle books can be read in both places.
Matt

I can't install Flash Builder from the Web Premium suite, what should I do?

I just downloaded the Adobe Creative suite 5.5 Web Premium and am about to install the program but notice a note next to the Adobe Flash Builder program... it explains that my system doesn't have the requirements needed for this program. I checked and it explains further details stating that I need to have a • Mac OS X v10.5.6–10.6 and I doubled check which version I have and it's OS X 10.5.8. Doesn't this actually mean that it does meet the requirements?
Please advise as to what can be done to be able to download this specific program.
Thanks,
     Sarah-Kay

ok,
so for the memory:      it's 4 GB 1067 MHz DDR3 and when I click to
install the programs it says (Macintosh HD: 10,0 Go (459,5 Go
disponible).
As for the processor: it's 2.66 GHz Intel Core 2 Duo
Monitor resolution:    1920 x 1200
Le 12-02-28 à 17:35, Jeff A Wright a écrit :
Re: I can't install Flash Builder from the Web Premium suite, what
should I do?
created by Jeff A Wright in Downloading, Installing, Setting Up -
View the full discussion
We do still need more information such as how much memory you have,
resolution of your monitor, how much disk space you have free, which
processor are you using. I good guide is to look at the system
requirements and try to post for each of the items within the
requirements. The system requirements for Web Premium can be found
at http://www.adobe.com/products/creativesuite/web/tech-
specs.edu.html.
>
Also you can find this information within your System Profiler. The
easiest way to access the system profiler is to go to the Apple Menu
and select About this Mac. Once selected clicking on the more info
button will launch the System Profiler.
Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page: [http://forums.adobe.com/message/4235635#4235635
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/4235635#4235635
]. In the Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by
email or at Adobe Forums
For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/message/2936746#2936746

Can't connect throut proxy to the Web.

I can't connect through proxy to the Web by use URLConnection or HttpURLConnection.
I used:
Properties prop = System.getProperties();
prop.put("http.proxyHost","your-proxy-host");
prop.put("http.proxyPort","proxy-port");
get err:
Error Code: 407 (Proxy Authentication Required).
Error: Access is Denied.
1. How can I setup my app to work through a proxy server?
I think that is must the proxy server get username and password, because browser demand login too, when connect URL via proxy.
2. How can I send username and password to the proxy server?
PS: with browser (IE) I connect to the Web perfectly.
Thanks,
Hill

See if this works:
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.text.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.net.*;
import java.util.*;
public class randomYahooLink
{ private URL randomYahooLinkURL;
 private String pageSource;
 private JEditorPane pageHolder = new JEditorPane();
 public randomYahooLink()
 { System.out.println("Entering default constructor.");
 try
 { randomYahooLinkURL = new URL "http://random.yahoo.com/bin/ryl");
 } catch(MalformedURLException MUE)
 { System.out.println("ERROR: Malformed URL!");
 System.out.println("-fin- default constructor");
 public randomYahooLink(String proxyHost, String proxyPort)
 { System.out.println("Entering proxy constructor.");
 System.getProperties().put("proxyHost", proxyHost);
 System.getProperties().put("proxyPort", proxyPort);
 try
 { randomYahooLinkURL = new URL("http://random.yahoo.com/bin/ryl");
 } catch(MalformedURLException MUE)
 { System.out.println("ERROR: Malformed URL!");
 System.out.println("-fin- proxy constructor");
 public void getPage()
 { System.out.println("Entering getPage() function");
 try
 { pageHolder.setPage(randomYahooLinkURL);
 } catch (IOException IO)
 { System.out.println("ERROR: Could not retrieve link.");
 } catch (Exception e)
 { System.out.println("ERROR: Some unknown error thing.");
 System.out.println("-fin- getPage()");
 public void displayResults()
 { System.out.println("Entering displayResults() function.");
 try
 { pageSource = pageHolder.getText();
 System.out.println("RETRIEVED " + pageSource.length() + " bytes of data");
 } catch (Exception e)
 { System.out.println("ERROR: Could not display results.");
 System.out.println("-fin- displayResults()");
 public static void main(String args[])
 { boolean done = false;
 long thisTime;
 randomYahooLink thisLink = new randomYahooLink("proxy","port");
 System.out.println("Program initialized.");
 while (!done)
 { try
 { thisLink.getPage();
 thisTime = System.currentTimeMillis();
 while (System.currentTimeMillis() < thisTime + 5000)
 { // do something
 thisLink.displayResults();
 } catch (Exception e)
 { System.out.println("ERROR in main program loop.");
 System.out.println("Completed program.");
}email me at [email protected] if you have trouble.

Can I use Safari as my main web browser and Firefox when Safari isn't supported?

Can I use Safari as my main web browser and Firefox when Safari isn't supported?

www.apple.com/support/safari
Also use the User Agent and see if that works on those sitess.
Safari keeps a lot of web history and cache on disk and it tends to be RAM hungry (even FF has gotten a big larger on RAM footprint)
There are other browsers and sometimes Opea is a good choice or there is OmniWeb which I still after 10 yrs? still favor.

Can I use my G5 on the web without antiviruses ?

Similar Messages

Maybe you are looking for