Can I use my iMac24 with a Dell printer?

I am trying to connect my Dell 3000cn (networking color laser) to my iMac via Airport Extreme. The printer is recognized in the Printer Utility, but does not communicate with the iMac. First, can the iMac connect to a Dell printer? If so, how do I ensure I have the correct drivers? (Note: also posted on Airport Extreme forum.)

http://www.dellcommunity.com/supportforums/board/message?board.id=S2500&message. id=2530&c=us&l=en&cs=&s=gen
George

Similar Messages

HT1665 Why i can not pair my ios4 with my dell pc via bluetooth?

Why I can not pair my ios4 with my dell pc via Bluetooth ?

iPhone's Bluetooth is intended essentially for headsets, keyboards, and cars. Pairing with computers is not supported. Why use Bluetooth when you have wifi?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

How can I use an iPad with two itunes accounts?

How can I use an iPad with two itunes accounts?
Hi there
My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
How do I do this please?
I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
Any advise please?
Thanks

You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
It's not meant to be a multiple user/multiple ID device.

How can i use text expander with the new Mavericks,

how can i use text expander with the new Mavericks,

I regret upgrading to mavericks for the same reason
ftamez wrote:
how can i use text expander with the new Mavericks,
Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

HT202213 can i use home sharing with my wife who has a different apple id

Can I use home sharing with my wife who has a different apple id so we dont buy the same songs twice

Wow, great question mhaney73. There's got to be a way. I have that problem as well, double songs all over the place.

HT4363 Can I use home sharing with FaceTime?

Can I use home sharing with FaceTime

Winston,
Thanks for the promt reply. But my problem was that I did not know how to use the air play. I looked around and figured it out.
thanks,

Can I use my macbook with a mac mini

can I use my macbook with a mac mini

You mean can you network the two Macs?
What OS X version are you running on both of your Macs?

How can i use "icloud backup" with ios 4.2.1?

How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.

You cannot.
It requires ios 5.
Your iphone can only go to 4.2.1

I just downloaded ios7 now i can only use the phone with the speaker, how can i fix this?

I just downloaded ios7 now i can only use the phone with speaker, how can i fix this?

x

How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
Philipp

Philipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application!

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket.

Can I use my iMac24 with a Dell printer?

Similar Messages

Maybe you are looking for