Can I use my ipad dock connector for an iphone 4s

I'm upgrading to an iPhone 4S and don't want to spend $30 unnecessarily on a dock connector. 
Will my iPad (original version) dock connector work with the 4S?
Tks,
Richard

Yes, you can.

Similar Messages

  • Can I use my iPad charger (12W) for my iPhone 6 plus?

    Can I use my iPad charger (12W) for my iPhone 6 plus?

    Yes.
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=8d 7042cf93850edb06090977172ef6f9409814f682…

  • Can I use my iPad mini charger for my iPhone 5c.

    Can I use my iPhone 5c charger for my iPad mini

    Hi 50mike,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iPhone, iPad, iPod: Using iPad Power Adapters
    http://support.apple.com/kb/ht4327
    You can use the iPad mini charger to charge the iPhone 5C, but not recommended the other way around.
    The article below explains that the iPhone charger is meant to charge only iPhones and 1st generation iPad mini.
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    To charge your iPad battery, try one of these:
    Connect iPad to a power outlet using the included cable and USB power adapter (use the table below to determine which adapter is intended for your iPad.)
    Connect to a high-power USB 2.0 port using the included cable.
    Note: Some USB 2.0 ports and accessories do not provide enough power to charge iPad. When this occurs the message "Not Charging" appears in the status bar next to the battery icon.
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • I would like to have my iPad2 mirror onto 2 TVs at the same time. Can I use the iPad HDMI connector with a HDMI splitter to accomplish this?

    I would like to have my iPad2 mirror onto 2 TVs at the same time. Can I use the iPad HDMI connector with a HDMI splitter to accomplish this?

    I don't want to spend the money on the HDMI connector and HDMI splitter if it won't work.

  • Can I use The iPad charger also for The iphone4?

    Dear all: can I use the iPad charger also for the iphone4?
    Tanks,

    Yes. You can use it for any appropriate Apple product, right down to the iPod Nano.

  • HT1476 could I use an Ipad 2 charger for an Iphone 4s?

    could I use an Ipad 2 charger for an Iphone 4s?

    Yes, an iPad's charger can safely be used with an iPhone - from here :
    The iPad USB Power Adapter is a 10W charger. While designed for use with the iPad, you can use the iPad 10W USB Power Adapter to charge all iPhone and iPod models by connecting them using a Dock Connector to USB cable.

  • Can i use the one apple id for my iphone

    Can i use the one apple id for my iphone & ipad...is there any demerrits to this

    what if i dont wanna use the same id.....
    sorry to be direct & asking you my ?
    Whenever i downlaod an app OR game ...it will NOT be shared on my wifes iphone4s..correct
    but when ever i take a pic from my ipad...will it be shared thru icloud....i want it to be shared (only pics)

  • HT4101 Can I use this iPad SD reader on my iPhone 4? I don't have an iPad

    Can I use this iPad SD reader on my iPhone 4? I don't have an iPad

    According to the Apple Store website the iPad CameraConnection Kit is compatible only with iPads.

  • Can I use my iPad power cord with my iPhone 5, using the new 30-pin/lightning adapter?

    If I buy the new 30-pin adapter for the Lightning connector, can I use my iPad charging cords (10w) for my new iPhone 5 (5w)?

    Yes.  The purpose of the adapter is to allow you to use old cords and docks to work with the new iPhone 5.

  • Audio line out port (Apple iPad Dock Connector) not working Iphone 4 os 4.2

    For my new iphone4, the audio line out port (Apple iPad Dock Connector)is not working. Both using a cable to mini jack (3,5 mm) or in dockingstation.
    I'm using OS 4.2.
    IS this a bug?
    Thanks
    Hans

    I just came back from the Apple store.  My iPhone4 DOES have a working line out when plugged into a Apple name brand dock connector.   I don't know why my SendStation refuses to work only with the iPhone4 yet works with iPods, etc..
    Solution? I'm buying an Apple iPod dock connector for home and will try to find something with line out for the car - Apple says they do not make one.

  • Can I use my iPad charger to charge my iPhone and vice versa?? Will it cause any damage?

    Hi
    I have an iPhone 4S and iPad 2 and have been swapping the chargers about when charging. Now a friend tells me that this isn't good and I should use the specific charger for each. Firstly, is this right??
    Secondly, I now no longer know which charger belongs to which product. Does anyone know the voltage for each?? (I live in the UK, not sure if this would make a difference).
    Thirdly, I also have a MacBook Pro. Can I charge my iPhone and iPad from this without causing damage?
    Thanks in advance
    Ben

    iPad charger: 10 or 12W (Apple uses Watts)
    iPhone charger: 5W
    The iPad charger looks larger than the iPhone one. Additionally, the iPad charger can be used with an extension cable, unlike the iPhone charger. You should notice that the iPad charger has a detachable plug.
    It is more than safe to use an iPhone with an iPad charger. I don't recommend the other way around (using an iPad w/iPhone charger) but the iPad 2 doesn't syphon power like the iPad 3/4 do.

  • Can I use the Ipad Wall Adapter and my Iphone USB cord to charge my Iphone 5s?

    I heard that the IPad wall adapter will charge an IDevice faster, so I was wondering if I used my IPads wall adapter and my IPhones USB cord to charge my IPhone 5s, will it be okay?

    You are welcome.  Knowing which chargers are interchangeable helps when traveling, I only carry the iPad charger now since it works fine with the iPhone.  The other way around will not work, however.  You cannot charge an iPad with an iPhone charger, the power rating is too low.

  • Can I use my iPad dock with 3rd gen iPad?

    I already have an iPad 2 dock. Can I use this for my 3rd gen iPad?

    Hi Capp 543:
    I don't really use it any more live, mainly because I use my iPad for reading music and don't want to switch around apps. I'm not part of the company, but I'll try.
    IMO the iRig manual is way way too simplistic.
    I am attaching some jpeg's of what helped me solve it, though it was tough. If it doesn't open, search Audio Midi Setup help for "sharing midi data over a network". You have to create a wireless session using Audio/Midi setup, OR create an "ad hoc" network using bluetooth if there's no wi-fi (another set of problems...). This may be your issue. There are a few things beyond getting the wireless network appearing that you have to do, that's why I'm suggesting this even though you did it, or a part of it.
    In particular:
    "Anyone" has to be set as who can connect to me in the lower left of the wireless midi setup screen, and
    First get everything else ready, meaning the iPad connecting, THEN LiveRig has to be launched from closed, meaning do an icon hold and close in down iPad, then open it up for it to connect, when everything else is ready. for some reason that helped me.
    In MainStage, you of course need to go to the MainStage #1 Setup screen, drag in sliders, then "learn" them to the LiveRig, which should now be seen when you click "learn" and move a Liverig slider. I have a vague recollection about not seeing iRig in the MainStage #1 top left device window, but then   going into the drop-down menu there where the device shoudl be, selecting it, then learning the sliders. Then in the #2 Edit window you assign the sliders etc.
    I would suggest first connecting it via midi wires and getting it to work, which will help you decide if a problem is in the wi-fi or somewhere else when you go to connect it up with wi-fi. You'd need the Apple Camera Connection kit adaptor. I myself would alway run it via midi if I'm playing live, too many unknowns with unknown networks.
    Hope that helps.
    Neil

  • Can we use JDK in ERP Connector for tranferring data between two DBs?

    HI ALL,
    Iam using ERP connector for transferring the data between Proectserver 2003 and R/3 system.
    In Erp connector Previously they are using SDK in .net
    My assumption is Can We use the jdk for this.
    Thanks in advance.
    Regards
    BHI
    Message was edited by: BHI BHI

    hello bhi,
    you want a connector for R/3 that runs in java?
    if it is, you case use SAP JCo. I don't have any
    idea however, if this connector could connect
    ProjectServer and R/3.
    regards
    jo

  • Best Ipad3 case with keyboard? Can I use a Ipad 2 case for Ipad 3?

    I just bought the Ipad3 and I need to buy the case, but all the cases I found are for the Ipad 2 - are the Ipad 2 and 3 the same size? Can I use same case?
    Which one is the best case with keyboard for ipad 3?
    Thanks!

    First, we have a whole bunch of threads on this, so a search would help, and it would offer dozens of answers to this you might want to think about including a long thread where I reviewed a whole bunch of keyboards for the ipad3....
    But in short,
    The Zagg Folio fits both the 2 and the 3 -- most people are finding in general that almost all cases made for the ipad 2 work with the iPad 3....
    The Zagg has what I have found to be, by far, the best keyboard with the least errors -- in fact, I was able to get about 60 wpm on the keyboard without error after only a few minutes of practice. The downside is that the case is flimsy, looks kinda cheap, and its really hard to get the iPad out of the folio case -- I've found I have stopped using the folio at all, and just use the keyboard on my desk at work.
    The clamcase fits both the ipad 2 and the iPad 3 -- it is by far the best overall case/keyboard that I have found. It looks great -- and the keyboard works well. Because of the realignment of the magnets in the ipad 3, it does not turn on/turn off the iPad like it does with the ipad 2, where that works flawlessly.
    The downside is that the keys are cramped, and the error rate increases. With about a half hour of practice, I got about a 45 wmp typing rate, and that included several errors that required correction. It's a tradeoff because the keyboard feels good, the response is good, but because the keys are not seperated it is harder to type. I use this case only when I go on longer trips and don't want to take my laptop.
    The nest overall keyboard is the Apple bluetooth keyboard without a case -- but it's a pain to lug it along, and you need a seperate "easel" for your ipad. Still, it's the best keyboard you can use -- and I get 65 wpm error free with this keyboard. I have one at home, and it's my keyboard of choice when you don't need the case.
    Finally, I've gound that Brookstone makes a decent keyboard -- it works well, comes in multiple colors, and its actually more stable than the Zagg folio. The keyboard is not as good, though, and is plastic-y feeling. Still, it might be a fair tradeoff.
    Almost all other keyboards are made by the same companies and distributed to third parties who put them into their own cases. I'd stay away from most of the other keyboards.
    Overall -- for the convenience of the sheer folio thing, the Clamcase is about as good as it gets, even though it is about 50 dollars more than the Zagg and other similar models. Plus it makes your iPad look like a macbook, which is kind of cool.

Maybe you are looking for

  • Default Safari email client

    I get and preview some email using a webmail account before actually popping it into an email client. One of the webmail options is to save the email directly which I had never done before. Curiously, when I saved it, it downloaded and then opened my

  • Songs by artist out of order

    Ok, so I've been using a program for months to manage my ID3 tags on my music. I like my ipod a lot, I use it everywhere I go, but recently after downloading 6 albums of a certain artist, I used the ID3 tag manager (like always.. never had a problem)

  • Printing text in smartforms

    Hi everyone i am working on smartforms and i have to print a text which is of som 50lines in 2 columns

  • How was this trailer made?

    http://www.macheist.com/teaser I think it looks pretty cool - Apple Motion? Adobe After Effects? Both? If something else, can someone give me their best guess as well as what books to buy to learn how to do this? Already have a good 2007 FCP book (Ap

  • EJB newbie: Why getters and setters when I don't use them?

    I'd like to know why I have to write getters and setters in my bean implementaion class when I don't use them. I have SQL statements in my entity bean class that does querying and updates and I don't need to get or set individual fields of my databse