Can i use my iPod Nano 3rd gen data cable with iPhone 2G?

I know you can't use the wall charger of iPod with the iPhone but can i use the usb cable? I broke my iPhone cable but i have an iPod nano 3rd gen data cable

Thank you very much for the quick reply

Similar Messages

  • Can I use my iPod Nano 2G USB connection cable with iPad 2?

    The connection cable for my iPod Nano 2G looks almost the same as the connection cable for my iPad 2, the only obvious difference being that the iPod cable has a bigger plug with press-in release buttons.
    Is it possible to use either cable with either device, or is each cable device-specific?
    TIA

    You should be able to use this cable without any problems.

  • Using a ipod nano 3rd gen. with a ihome ih5

    I wanna buy an ipod nano 3rd gen and I have already a ihome ih5. will it fit?

    Why don't you ask someone who has a 3rd gen nano? They usually hang out in the iPod nano 3rd gen forum.
    http://discussions.apple.com/forum.jspa?forumID=1212

  • Can I use my ipod nano 4th generation 16 gb with an Itunes acoount that already has a ipod touch 32gb and an iphone 4 32 gb?

    Can I use a ipod nano 4th generation 16 gb on the same itunes account with a ipod touch 32 gb and a iphone 4 32 gb?

    Yes.
    (58619)

  • Ipod Nano (3rd gen) not syncing with Microsoft Outlook 2007

    I previously upgraded computers and now I can't sync my ipod with my outlook calendar. I upgraded to 2007. Any ideas? I'd greatly appreciate any thoughts or help. Thanks.

    iTunes 11 won't even recognize my 1st and 3rd gen nanos. They've just rendered all the devices I love useless.
    You can send feedback on the upgrade here:  http://www.apple.com/feedback/itunesapp.html. I'm hoping enough legacy iPod users will speak up that they'll rethink and/or fix it.

  • TS1538 Does Ipod Nano (3rd gen) not work with Windows 8?

    I have tried all of the uninstall and reinstalls, upgrades, reset of ipod nano, etc.... Cannot get computer or itunes to recognize ipod nano.  Does this device work with Windows 8?

    Have you had a chance to look at this troubleshooting page? It may be of some help: What to do if iPod can't be updated because the firmware file was corrupt or not found

  • My Ipod Nano (3rd Gen) won't sync with Itunes. Help!

    My Ipod nano 3rd gen stopped syncing with my Itunes for some reason. I switched the cords and it still doesn't sync. It doesn't even show the little lightning bolt on the battery and more.

    CORRECTION IT IS A 4TH GEN.

  • If I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...

    if I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...
    They are not listed as devices on the itunes store account...

    Hi BradSLane,
    Thanks for using Apple Support Communities.  This article has one method to find your serial number:
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    Go to My Support Profile*.
    Sign in with your Apple ID.
    View your purchases in "My Products".
    * Currently available only in certain languages.
    Note: If you need help remembering your Apple ID(s), go here.
    Take care,
    - Ari

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPod nano 3rd gen went mad then all the songs were gone can I get them back

    My iPod nano 3rd gen wiped all my music can I recover it

    If it's no longer in iTunes or stored in a backup anywhere, I"m afraid you are out of luck. 
    For music purchased in iTunes, you can redownload it again no cost via iCloud if you live in a country where this service has gone live.  See this article for more details.
    http://support.apple.com/kb/ht2519
    As for music imported from outside of iTunes, you'll need to rerip those into iTunes if at all possible.
    B-rock

  • Why can I not sync my iPod Nano 3rd Gen to my iTunes 9.1.1?

    My daughter mistakenly downloaded the latest iTunes version which does not work with my older iPod Nano 3rd gen.  Before all this happened I was running version 9.1.1 which was working beautifully.  After uninstalling the updated version and reinstalling the 9.1.1 version, I cannot restore nor sync my music to the iPod Nano.  I would just be happy having things the way they were previously.  Any tips???  Thanks.

    Go to the Apple icon in the upper left corner and select 'About this Mac' - it will show you which version of OSX you are using.
    Read this KB from Apple - http://support.apple.com/kb/ph12113
    MJ

  • IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

    I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
    Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
    I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
    Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
    Thanks,
    Global_mongrel

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • Mac ipod nano 3rd gen - to windows xp

    Hey every body,
    I currently own a ipod nano 3rd gen. I however have mbp at home(where the nano is registerd) Till yesterday i saved a file on my nano. Tried opening the file today on the pc. However it does not come up. It says that the nano is not formatted. Anyone know how i can access this file?

    As far as I know you can't. A PC can't read a Mac-formatted iPod is the problem.
    If you have to use the Nano on both OS, you will have to have the Nano in PC format. A Mac can read a PC formatted iPod, but not the other way around, as I said above.
    Message was edited by: StarDeb55

  • Driver for Ipod Nano 3rd Gen

    Hi
    Just brought Ipod nano 3rd gen and plugged it into PC. It is not able to install properly - computer says it can't find driver. Any ideas how to resolve this?

    I am having the same issue here.
    OS: Vista ultimate 64-bit
    iTunes: 7.6.0.29 (64-bit)
    iPod: Nano 8gb 3rd gen
    I currently have a 60gb iPod Photo that works flawlessly. I bought the Nano tonight, brought it home, and charged it up. Plugged it in, and now Windows Vista is asking for drivers for the Nano. Doesn't recognize the Nano at all.
    The Nano knows it's plugged in, and is giving me the "eject before disconnecting" screen. However, Vista wants drivers, and iTunes doesn't recognize the Nano is connected whatsoever.
    Can someone please shed some light on this for us? Thanks.
    [edit] Yes, I have reset the Nano. Yes, I have uninstalled iTunes, rebooted and re-installed iTunes. Yes, I also tried putting the Nano into Disk Mode manually and connecting it to the system, but the system still wants drivers....
    [edit2]And yes, I'm using the administrator account on the system, too.

  • Ipod nano 3rd gen. video download question

    Hi All,
    I tried adding a movie video to my ipod nano (3rd gen) and it took up the space when I synced it but when I ejected and went to find it on my ipod it wasn't there. There was no video file to find but the space was indeed used. My husband has a Ipod classic and the same movie synced onto his ipod and my daughter has the ipod nano 4th gen and she was able to view movie also. Is the 3rd Gen nano not video compatible? Thanks in advance for your help in this matter.

    It's as compatible as the 4G version; I think you just had bad luck. If you can't find & delete the (large) file, you'll have restore and start over.

Maybe you are looking for