Can i use my new I pad with the Canon MX870 printer?

Can I use a I PAD 2 with me Canon MX870 Printer?

The Canon MX870 is not on Apple's AirPrint list of supported printers:
AirPrint basics
So you would have to find some Canon app or some third party app in the App Store to do some limited printing from iPad.

Similar Messages

  • Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

    can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • HT2534 I just create a new ID, but after verified my email add, I still can't use my new ID neither with credit card nor none. I just stuck at review my account step, please advise.

    I just create a new ID, but after verified my email add, I still can't use my new ID neither with credit card nor none. I just stuck at review my account step, please advise.

    What do you mean 'give me an example please' ? And 'dont have use a credit card' ?
    Unless you follow the instructions on this page when creating a new account : http://support.apple.com/kb/HT2534
    then you will need to enter credit card details before the account can be used in the store.
    If you don't have a credit card then you will need to create a new account, but this time follow the instructions on that HT2534 page when creating it. If you want to use the same email address then you will need to replace it on that account first e.g. via the Store > View Account menu option on your computer's iTunes, http://appleid.apple.com, or by tapping on it in Settings > iTunes & App Store on your phone.

  • Can i use my old IPOD dock with the new G5 IPOD?

    Can i use my old IPOD dock with the new G5 IPOD?

    That's really good to know. I thought because it was a different thickness you wouldn't be able to, and the dock adaptor that comes with the new iPods doesn't fit into the old Photo dock.
    Do you know if you can use the charger that came with the old Photo iPods? You can plug straight into the power socket, but the cable that goes into the charger from the iPod is the firewire cable, so I was thinking maybe it wouldn't work, and I don't want to try it in case I short out my iPod or something!

  • What application can you use to open a file with the .acc extension?

    What application can you use to open a file with the .acc extension?

    http://www.fileinfo.com/extension/acc

  • How can i use Mail on 2 macs with the same mail address?

    Hi,
    I have two Macs, connected through WLAN. From each Mac I can use Mail (sending and receiving) with the same mail address. This worked well; on each Mac I have separate files storing the mails (input, sent, trash, …).
    Some days ago I had to change the provider. (Perhaps this may be the reason for my problem?) Now both mail systems are connected - in the way that if I put on Mac *1 a mail into the trash it is automatically thrown into the trash on Mac *2.
    What is to be done to separate the two systems (i. e. make them independent of each other)?
    Hans

    It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
    The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

  • HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

    I have Parallels installed with Windows 7.  Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

    You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

  • I cannot set my igoogle page as my home page using a new MacBook Air with the latest verion of the Mac OS and Firefox.

    I have a new MacBook Air with the latest Mac OS and I down loaded the latest version of Firefox from your web site. I am trying to set my igoogle page as my home page. I log into my igoogle home page and then go to the Preferences option on the Firefox menu. I click the option to use the current page as my home page. As long as I am logged into Firefox it takes me back to my igoogle home page when I click on the Home icon. If I log out of Firefox and open it again later in the day it takes me to the igoogle log in page but not my home page. I have a Mac at home and do not have this problem and I do not have this problem with my PC at the office.
    Any ideas?

    I have a new MacBook Air with the latest Mac OS and I down loaded the latest version of Firefox from your web site. I am trying to set my igoogle page as my home page. I log into my igoogle home page and then go to the Preferences option on the Firefox menu. I click the option to use the current page as my home page. As long as I am logged into Firefox it takes me back to my igoogle home page when I click on the Home icon. If I log out of Firefox and open it again later in the day it takes me to the igoogle log in page but not my home page. I have a Mac at home and do not have this problem and I do not have this problem with my PC at the office.
    Any ideas?

  • Is the new imac compatible with the dell v313w printer for wireless connection?

    Is the new iMac compatible via wireless connection with the Dell V313W printer?

    Hi Sara!
    I got an email refering me to your post.  Ok, www.MacMall.com is a US website that sells Apple products.  I bought my iMac&printer through their website and worked with their customer service department to get my iMac communicating with the Dell V313W printer.  They have people that will take calls any time-any day at phone number 1-800-622-6255.  The other option since you are in France would be to contact a local Apple dealer...or see if they have an authorized dealer in Europe that could help.  I purchased the Apple Care Support contract with the iMac but they were unable to help since they weren't familiar with the Dell printer.
    As I mentioned in my previous post the things we tried were: 1) If I remember right... I downloaded the Dell V313W printer driver from the Dell website then connected the iMac to the printer via the USB cable and established communication. I then disconnected the cable and 2) I moved the iMac and printer closer to my wireless router then 3) I turned on "Printer Sharing" on the iMac - I think this is a critical step...to do this go to System Preferences > Hardware > Print&Scan.  In the window that opens make sure the box is checked that says "Share this printer on the network" then go to the "Sharing Preferences..." box and check the "Printer Sharing" and "Scanner Sharing" boxes in the window that opens.  When I did all this the iMac went through it's routine to find the printer and the connection was finally established! 
    One more thing, make sure if your wireless router is locked for security that you enter the correct password when prompted...this might have been one of my problems also!
    Hope this helps.
    All the best,
    mw

  • How can I use a newer itunes library with an older version of itunes on a different computer?

    Hi there. We are running iTunes 10 on our (1.5-year-old) iMacs with the entire music library there.
    I also have an old iMac G4 (for those of you who remember what that is :-) sitting in the living room that we use for watching DVDs and listening to music. The G4 is running iTunes 9, as it obviously is stuck with OX Tiger. I've last updated the music library on that machine probably about a year ago at which stage it still worked (by copying the library across from the other computer).
    Now it doesn't work anymore. If I copy iTunes library over, I get an error message saying 'this library was created with a newer version of iTunes'. So that's no good. So what can I do without having to re-purchase and re-import music and re-set up playlistst etc? Surely that must be possible, they cannot just forbid me to use my own music that I've even purchased through iTunes? Any ideas?
    Thanks,
    Felicity.

    In the iTunes folder on the G5...
    Delete the file iTunes library.itl.
    Move the iTunes library.xml (or iTunes Music library.xml) to the desktop.
    Start iTunes.
    iTunes menu File > Library > Import playlist and select the iTunes library.xml you moved to the desktop.
    You can then delete the file on the desktop.

  • How can I use a new mobile number under the same Apple--ID?

    Hello there.
    Since few days I habe an 5S with a new number. But I can't use FaceTime or iMessage with it. Im Setzlings is still my old number and I can't change it. When I logged in in my Apple-Account and changed my number and saved it, there is still my old number at the settings. Do you have an idea?
    TA.

    Log out of your Apple ID with iMessage at Settings > Messages > Send & Receive > Apple ID. Select your Apple ID and at the menu window that appears, select Sign Out. Follow this by turning iMessage off.
    Turn iMessage back on and try to re-authorize your iPhone with your Apple ID with iMessage which should register your new cell phone number.

  • Can I use APEX directly read/sync with the Oracle Tables ?

    We have a Oracle Database to manage the design data.I am trying to setup a web-based front end using APEX to manage & monitor the parts ordering & logisitics.I want to drive the master data directly from the database without any export or data transfer ? Can I directly read or Link an Oracle tables from APEX application.
    Also,once this is setup,I am looking for setting up some data entry fields to enter Purchasing & Logistics information.Hope I can achieve this using APEX !
    Look forward for the appropriate response.
    Thanks,
    Sham

    Tony,
    Thanks & Appreciate your Quick response.
    Glad that I can use the existing Oracle db schema with APEX.I am not sure if there is any information as how I can connect or link my production schema to the APEX ! I was able to import .csv files & use XL data to create some test databases & play with APEX..but,I did try to go thru most of the instructions & guides to find how to use the production oracle tables,but,could not find anything particular...Please send me a link or material info.
    I suppose I can then use which ever attribute or table data that is required to build the queries ! I am planning to use the production data to build the ordering & logistics application using APEX.Assume I can create new fields & columns for parts that will be ordered & capture/record the purchasing information like Purchase order numbers/Supplier Info/Target Delivery dates etc...
    - Am on very tight schedules to get this application up & running ! Is there any support team or a technical support team that I can call upon if I need any help ?
    Thanks,
    Sham

  • Can i use 2 ipod nano devices with the 1 itunes library

    Bought a second I pod nano ( both 7th generation) , was wanting to let my daughter use the first one while I use second one but just wondering if I can use 2 ipods on the one iTunes account ?
    If so how do I go about setting up the new one with my iTunes library loaded onto the new one without affection the original one ?
    I use a windows 7 laptop.

    iTunes treats each iPod separately.  Each one is listed separately in iTunes, even if you have BOTH connected at the same time.  Select one iPod and set it up as desired.  Select the other iPod and set it up as desired.

  • How can I use a shared library made with the application builder?

    Hi,
    I am using LabVIEW 7.1 running on Slackware 10.1 (kernel 2.4.29) and I am trying to call a graph display from a C program that I use for debugging VME access from a VMIVME controler. So using the application builder I built the VI as a shared library (graph.vi -> graph.so) containing a function called "graph". In my main program the call to the dlopen fails with the error: "graph.so: undefined symbol: UninitLVClient". When I examin graph.so with nm I see that UninitLVClient and other LabVIEW functions are indeed undefined and using ldd shows that graph.so has dependencies only on libc.so.* and *linux*.so.* but not on LabVIEW related stuff. Those functions are defined in the liblv.so that's in the cintools directory but I have no idea if the user is supposed to use that.
    So I think I am missing an important concept here. Can somebody help or direct me to some documentation (I found lots of information about how to link external code to LabVIEW but nothing about how to link LabVIEW code to an external program)?

    Thanks Watermann,
    your message has been very useful so now I am linking to the proper library but I still have problems when trying to load dynamically the shared library produced with LabVIEW. It is strange that I could successfully load the lvrt library at loading time but it does not work when I am loading the library at execution time.
    I made a small LabVIEW program that prints a hello window and I am calling it from a C program. In the first program main.c I am linking to the lvrt library at loading time and it works but in the second one I am linking dynamically at execution time and it does not work. For my work I need to be able to load code done in LabVIEW at execution time. Any help is appreciated!
    Program main.c:
    // small program to call a LabVIEW shared library
    #include
    #include
    #include "hello.h" // got this from the LabVIEW builder, i.e. when I made the hello.so
    int main(void)
    printf("Hello from C!\nLets call LabVIEW now\n");
    hello();
    printf("Bye ... \n");
    return 0;
    The command to compile main.c, i.e. linking shared library lvrt when loading main program:
    gcc -Wall -I /usr/local/lv71/cintools/ -o main main.c hello.so -l lvrt
    The LD_LIBRARY_PATH has been defined and exported:
    $ LD_LIBRARY_PATH=$PWD
    $ export LD_LIBRARY_PATH
    IT WORKS!
    Program main2.c:
    // small program to call a LabVIEW shared library
    #include
    #include
    #include
    int main(void)
    void * h_lvrt;
    void * h_hello;
    void (* hello)(void);
    char * error;
    printf("Hello from C!\nLets call LabVIEW now\n");
    // open LabVIEW RunTime shared library
    // in my computer located at /usr/local/lib/liblvrt.so
    h_lvrt = dlopen("/usr/local/lib/liblvrt.so", RTLD_NOW);
    // check for error
    error = dlerror();
    if (error) {
    printf("error : could not open LabVIEW RunTime library\n");
    printf("%s\n", error);
    return 1;
    // open hello shared library
    // in my computer located at /home/darss/lv_call/hello.so
    h_hello = dlopen("hello.so", RTLD_NOW);
    // check for error
    error = dlerror();
    if (error) {
    // close LabVIEW RunTime shared library
    dlclose(h_lvrt);
    printf("error : could not open hello library\n");
    printf("%s\n", error);
    return 1;
    // get function hello from library hello.so
    hello = dlsym(h_hello, "hello");
    // check for error
    error = dlerror();
    if (error) {
    // close hello shared library
    dlclose(h_hello);
    // close LabVIEW RunTime shared library
    dlclose(h_lvrt);
    printf("error : could not get the hello function\n");
    printf("%s\n", error);
    return 1;
    // call hello function
    hello();
    // close hello shared library
    dlclose(h_hello);
    // close LabVIEW RunTime shared library
    dlclose(h_lvrt);
    printf("Bye ... \n");
    return 0;
    The command to compile main2.c, i.e. dynamically linking library lvrt at execution of main2 program:
    gcc -Wall -o main2 main2.c -l dl
    The LD_LIBRARY_PATH still defined and exported.
    IT DOES NOT WORK!
    Program output:
    Hello from C!
    Lets call LabVIEW now
    error : could not open hello library
    /home/darss/lv_call/hello.so: undefined symbol: WaitLVDLLReady

  • How can i use my synology iTunes Server with the iTunes from my iPad?

    Have anybody the Same Constalation @ home? I like to have Access to my synology iTunes Server from my iPad via iTunes without a thirdparty App, to have Access to the Central Data like Music, etc.? Have some One expirence with the configuration and implementation?

    It will almost certainly not be possible. If you don't sign up for AT&T service for the iPad, then replace your Sprint card with a MiFi or Overdrive device from Sprint. This will use your Sprint service, but connect to your iPad using Wi-Fi. It also has the advantage of you being able to use it with any Wi-Fi capable device. IOW, you can use both your laptop and iPad at the same time with the MiFi or Overdrive, but only have to pay for one Sprint account. Of course, all devices that connect to the MiFi or Overdrive will use up your 5GB allotment, unless you use Overdrive in a 4G area. (Overdrive is unlimited on 4G, but has a 5GB cap in 3G areas.)

Maybe you are looking for