Can I use my old AirPort Extreme to extend my network?

I recently replaced my year-old AirPort Extreme with a Time Capsule. The TC setup was the easiest ever, and it actually asked if it was replacing the AirPort and used the old settings, network name, et al. Had it up and running in five minutes and all computers and devices attached to it without any changes necessary.
So now that I've got this AirPort, I'm wondering if I can use it like an Express and put it into the farthest reaches of my house to extend my network and attach it to my new Apple TV. I also have an old AirPort Express which isn't the 'n' model. What to do?

So now that I've got this AirPort, I'm wondering if I can use it like an Express and put it into the farthest reaches of my house to extend my network and attach it to my new Apple TV.
Yes, you could use the 802.11n AirPort Extreme Base Station (AEBSn) to extend the wireless range of the new TC. Whether or not, it will be successful, will depend on both at distance you are trying to cover and what form of Wi-Fi obstructions (walls, ceilings, floors, etc.) there are between the two routers.

Similar Messages

  • Can I use an old Airport Extreme as an extender with a new Airport Express

    Hi All,  I have Verizon Fios and the data line runs into my bedroom.  I purchased a new Airport Express today to replace the Airport Extreme (from 2006).  Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there).  I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible?  If so, how do I set it up?

    Can I use the old Airport Extreme as an extender
    Is this the "round" or "dome" shaped AirPort Extreme?
    If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
    However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
    In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
    f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do.

  • If i purchase a new airport base station can I use my old airport extreme 802.11n (3rd Gen) as both an extender of my wife for multiple iphones and as a router?

    I operate an old airport extreme base station 802.11n (3rd gen).
    There are 4 iphone5's and 1 iphone4 on my network along with 2 laptops running 10.6.8 and 10.7 respectively as well as two desktops with the same configurations as the laptops.
    I get a sense that the iphones may/will be useless the new airport.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    Thank you.  

    I get a sense that the iphones may/will be useless the new airport
    They will work fine with a new AirPort base station. You can use an iPhone or iPad to set up and configure the new base station. If you want to use a Mac to set up and configure the new AirPort, it will need to have at least Lion 10.7.5 installed. Mountain Lion 10.8 or Mavericks 10.9 could be used as well.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    You can use the older AirPort base station to extend the wireless network. No updates will be needed to your iPhones or Macs.

  • Can I use an old Airport Express to extend the range of a new Airport Express?

    Hi all.  I have an old Airport Express 802.11g (First Gen?) that is starting to fade.  Still works, but not what it used to be.  So I am going to buy a new Airport Express.  I'm not interested in the Airport Extreme.
    Question:  If I use the new Airport Express as my main wireless router, can I plug my old Airport Express into another room as an extender?  In other words, with the old Express and the new Express talk to each other or will a new Express only allow extension with another new Express?
    Thanks!

    Sorry, but the old AirPort Express 802.11 b/g does not have a setting to "Extend a wireless network", so it cannot be used as a extender with the newer AirPort Express if you plan to connect wirelessly.
    If you plan to connect the older Express using a permanent wired Ethernet cable connection, then it could be configured to provide additional wireless signal coverage in that manner.

  • HT4260 Can I use a new airport express to extend a network?

    If I am using an AirPort Extreme as my main wifi, but it is in bridge mode because I already have another router setup in dhcp on my network, can I use an airport express to extend my network, but use it hard wired?

    can I use an airport express to extend my network, but use it hard wired?
    Yes, assuming that you are asking about a new Express, or the 802.11n version. 
    This is very easy to do with the Mountain Lion operating system that you have.
    (The "roaming network" link above assumes that you are using the Leopard or Snow Leopard operating system...although the general information there is good).
    Connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express.
    Power up the AirPort Express and wait a full minute
    Click the fan shaped AirPort icon at the top of the Mac's screen and look for the heading of New AirPort Base Station. Just below that, click directly on AirPort Express there
    AirPort Setup will open automatically and take a minute to analyze your network and then announce that the Express will be setup to "extend" your AirPort Extreme network
    Enter a device name for the Express and click Next
    AirPort Setup will take another minute to configure the Express
    When you see the message of Setup Complete, click Done
    That's it.

  • How can I utilize a 2nd Airport Extreme to extend a network but not WIFI, only hardwired?

    Hi All.  Need your help figuring this out.  The location of the cable line in my home causes a bit of an issue for my internet dependant electronics.  My computers have no problem connecting over Wifi but certain peripherals require an ethernet connection as Wifi is not an option for them.  I have prepared this quick diagram to explain my perfect set up.  I have a current gen Airport Extreme and a Previous gen as well.  How can I set my 2nd Airport to receive the Wifi from my main airport, but then only serve as a router, not extend the WIRELESS network.  Only provide a hardwired network.  In other words, I know how to "extend network" with airport utility, but then the 2nd airport also casts its own wifi network and causes problems.  I only want the one single Wifi network.  The 2nd router should only be providing ethernet connectivity.
    Is this even possible?  Both Airports are running the most updated firmware.  Any advice would be greatly appreciated!!!

    With a properly configured extended network both AirPorts will be broadcasting the "same" Wi-Fi network. This shouldn't impact wired clients at all. The other advantage of using an extended network is that your older AirPort Extreme's Ethernet ports will be enabled for wired clients.
    At present the only other option would be to connect the older Extreme to the newer one using an Ethernet connection between them. Then disable the older Extreme's Wi-Fi radios.

  • How can I use my old AirPort Express?

    How can I use my old AirPort Express (the one that plugs right into the wall without a power cable) to stream music to a stereo when I am using the new Airport Express?  The AirPort Utility 6.1 will not recognize the old AirPort Express.

    Apple does not make it easy for you to use an older device when they want you to buy newer devices.
    See this link for tips on how to install a version of AirPort Utility on Mountain Lion that will allow you to configure your older Express:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
    This is not supported by Apple, so it is your decision on whether you want to move forward with this. It works fine for me, but I cannot guarantee that it will work for you, nor offer support if you have difficulty.

  • How many devices can I use with an AirPort Extreme Base Station?

    How many devices can I use with an Airport Extreme Base Station? Devices included a mac, iphone, ipad and pc laptops.

    The AirPort Extreme will support up to 50 wireless devices and 200 wired Ethernet devices. I would imagine that this would probably be adequate for most homes.

  • Can I use my 2010 AirPort Extreme as a range extender with a new AirPort Extreme?

    I want to use an existing AirPort Extreme (2010 model) with a new AirPort Extreme to extend the range and signal strength into a shop. They are different designations, one n and the other ac. Are they compatible. I need to know before I buy the new router.

    The new AirPort Extreme will provide an ac,n,g,b compatible wireless signal.
    The existing AirPort Extreme can be configured to extend the n,g,b signal, but it cannot extend the ac signal.

  • Is it possible to use the old AirPort Extreme to share disks?

    I had bene thinking about possible disk sharing prior to the relaese of the New AirPort Extreme with AirPort Disk and would like to know if it would be possible to do this with the old AirPort Extreme Base Station.
    I had thought of attaching storage to my Power Mac to allow others in the house the ability to use that storage, of course it would have to be on. It would be a better solution to have a disk on the LAN that all of the Mac's in the house could use as an extended Home folder.
    If this is possible could someone explain how and what disk options would be available and good buys?
    Thanks

    Using the old AEBS it was possible to access disks over the network, but not via the usb port. The Airport disk is a completely new feature in that it seems to operate via the USB port. Beyond that its hard to advise you as it has yet to be released and there is comparatively little product info on it as yet.

  • Can I use an American Airport Extreme in the UK?

    Hi guys,
    I bought an Airport Extreme in the US sometime ago. I never managed to get it to work and gave up. My Wireless has gone down so I thought I would give it another go. Still can't get it to work.
    Will a USA airport extreme work in UK?
    I have updated firmware to version 7.4.2
    The big issue I think is on the wireless options page I can only select America, Canada or a bunch of South American counties. Do the US have different wifi signals to UK?
    Is there anyway of over writing the firmware with UK firmware?
    Is it not any of the above and maybe I am just setting it up wrong?
    Please help,
    thanks.
    Jamie

    Welcome to the discussions!
    +Will a USA airport extreme work in UK?+
    Yes
    +Do the US have different wifi signals to UK?+
    Yes. UK uses channels 1-13. US uses 1-11. You won't be able to use 12 and 13 on your AirPort Extreme. I'm not sure about 5 GHz channels if you plan to use that frequency.
    +Is there anyway of over writing the firmware with UK firmware?+
    No
    +maybe I am just setting it up wrong?+
    If you can tell us what modem (make and model number) you are using with the AirPort Extreme, we may be able to help with the setup.

  • How can i use my old iMac as a extended desktop display for my new iMac?

    I recently purchased a 21.5 in iMac and wanted to use my old iMac as a extended desktop. My new iMac has thunderbolt and USB 3.0 connections while my old iMac has firewire (400 and 800), USB 2.0 and mini-DVI. Is this posible?

    Welcome to Apple Support Communities
    If your iMac has got Mini-DVI, you have a 17, 20 or 24-inch iMac that doesn't support Target Display. Late 2009 and Mid 2010 27-inch iMacs, and iMacs with Thunderbolt can be used as external displays. Read > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    If your old iMac doesn't support Target Display mode, you can use ScreenRecycler to use your old iMac as an extended display for the new iMac. The only thing you need is that both Macs are connected to the same network

  • I am trying to hook up a second airport extreme to extend my network.  Can I do this without having another ethernet connection?

    I am trying to hook up a second airport extreme to extend my wireless network.  Can I do this without having a second ethernet connection?

    Yes. Apple's instructions to do this are here:
    http://support.apple.com/kb/HT4259

  • HELP! Problem with setting up Airport Extreme in "extend wireless network mode"!

    So I am trying to put my AirPort extreme in extend a wireless network mode. So I factory reset it, plugged it in, and went into Airport Utility to set it up. So it finds the device, and I set it up to extend the network. It does everything, and it gets set up. But there is an error message that says it was unable to extend the wireless network. Then 1 minute later, the Airport Extreme drops out, and the Airport Utility says device not found. I tried this multiple times, and it keeps happening. What should I do?

    Unfortunately, the AirPort Extreme will not be able to wirelessly extend a Netgear product. That feature will only work if you are connecting the AirPort Extreme to another Apple router.
    If you want the AirPort Exteme to provide more wireless coverage, you will need to plan to connect it to the Netgear router using a permanent, wired Ethernet cable connection.

  • Can I use an old UFO Extreme for wireless printing?

    Greetings, I have a new airport extreme base station managing my wireless network, but I am still printing wirelessly from a Macbook Pro by sharing a printer with wired a G4 desktop. (my 'main' BS is in the basement, G4 and printer on the 3rd floor, connected to the BS via ethernet). I have an older UFO style base station gathering dust that I'd like to use for wireless printing by having it sit next to the printer and connect to it via usb, join my existing network wirelessly, and, well that's it. Essentially I want it to be an airport express, so I can print wirelessly without the G4. Is this an easy/possible setup? What settings will I have to change on my 'main' airport BS as well as the UFO? Any guidance you can give me I'd very much appreciate. Many thanks in advance, and sorry for what I suspect is a dumb question.

    Badlyva, Welcome to the discussion area!
    The AirPort Extreme base station (AEBS) can not join a wireless network like the AirPort Express (AX) can. But you could configure your new AEBS to act as a WDS main base station and the old AEBS to act as a WDS remote base station. The bad part is that you would need to use 802.11g and the WDS link would cut your available wireless bandwidth in half of that.

Maybe you are looking for