Can I use my old Garageband Jam Packs with Logic Pro X?

I'm in the process of moving all of my Logic X Library content to an external hard drive and it occurred to me that I still have 4 GarageBand Jam Packs that I might be able to use in Logic X. Does anyone know if there is any real difference in the loop content of the Jam Packs and the loops that are on Logic X ? Has anyone tried this and made any kind of comparison? Just wondering. Thanks.

When you download all the additional content from within Logic Pro X.. any jam packs you are missing are then installed during that process... but if you already have them all installed the LPX additional content installer will find them and set them up for use in LPX.
The content of the Jam packs are identical....

Similar Messages

  • Can I use a VS-700C control surface with Logic Pro?

    Hi,
    Does anybody know if I can use a Roland VS-700C control surface and/or VS-700R audio interface with Logic Pro?
    Cheers,
    Craig

    If it supports the Makie protocol, it might work... but I wouldn't purchase one on that basis without trying it first.

  • Can i use an old eprint email account with a new printer?

    can i use an old eprint email account with a new printer?

    Hello arbazu,
    Unfortunately, when setting up a new/replacement printer, you wont be able to use the same email address, nor can it be transferred to another printer. Once an email is used, the email address itself is not able to be used for a certain period of time (which I believe is 6 months).
    However, by creating a new email address, but adding an 01 or 02 at the end, you can get something very similar to what you had previously.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Can I use the Sony XVAC-I Codec with Premiere Pro V6.0.5?

    Can I use the Sony XVAC-I Codec with Premiere Pro V6.0.5?

    No. You need to convert to another format first or use a third party plug-in.

  • Can I use my old charging cube purchased with and iPod Photo that has international plugs to charge my iPhone 4S?

    I have an old charging cube that I purchased with my iPod Photo several years ago.  It has various adapter plugs to use in other countries some of which have 220 volts.  In the USA we use 110 volts.
    Can I use the old cube with the proper plug to charge my iPhone 4S in Israel?
    Thanks in advance.

    The power will be okay.
    If the dock cannot take adapters, I strongly advise you to not use the dock (if you want to keep it), without creating support for the iPhone. It will break; had this happen to an iHome with my 5th gen iPod, due to the lack of accessories to support the new iPod profile.

  • Can I use my old AIr Port Extreme with my new Mac Pro with Lion installed? It has worked well with the G-4 that I'm replacing.

    Can I use my old Airport Exteme with my new Mac Pro with Lion installed? It has worked well for years with my G-4.

    I'm smarter now. It worked fine.

  • Using Eventide Eclipse as outboard gear with Logic Pro 8/9

    Hi, people,
    Anyone using Eventide's Eclipse as outboard FX box with Logic Pro? I'm thinking of getting one and running it via digital I/O into my RME Fireface 800. Any info appreciated.
    Thanks, Scorpii.

    Yes it is possible, first connect your outboard to the soundcard.....then load the I/O (inserts) plug in on the track you want to process....you can find it in the utility menu....then set the routing of the signal in the I/O window....if you want to record the processed track create a new track with the right routing and the work is done.hope this replay help you . Regards

  • Can't use my old HDD after upgrading with new one,old is GPT protected

    Hi everyone! First of all I would like to thank you in advance!
    Recently I upgraded my old HDD on my MacBookPro. I made a clone of the old disk, installed the new one in the MBP and putted the old one in external enclosure. Now I'm trying to use the old disk with the enclosure, but it doesn't appear in Finder, it appears in Disk Tools, but I can not perform any actions on it. I tried to erase it, but with no success! The old disk is GPT protected and I don't know what to do. Tried to erase it with Windows and Linux with no success neither. I know the enclosure works because it recognize every other disk, but my old one is untouchable to my Mac OS! I'm looking for possible ideas on how to make my old HDD usable with the enclosure?

    Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
    If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
    Here ard a few areas to spend time with
    http://www.apple.com/support/macbasics/
    http://www.apple.com/support/imac/intel/
    http://support.apple.com/videos/
    http://www.apple.com/support/lion/
    http://www.apple.com/support/osx/
    For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch  as you learn to use your iMac.
    Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
    Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
    http://it-ebooks.info/book/337/
    Good Luck!

  • Can I use an old Windows hard drive with Boot Camp?

    I have an old windows desktop that has FL Studio files I want to transfer to Logic Pro. I'm working on a Mac Pro with 4 hard drive bays and only 3 hard drives.
    I understand that Boot Camp lets you boot Wndows, but can I install Boot Camp without erasing the hard drive? I just want to be able to plug my PC drive in, hold the option key, and choose to boot the Windows drive from time to time.
    Alternately, could I make a disc image of my PC hard drive, reformat it to FAT and reattach the disc image?
    Thanks,
    Jon

    You can, but it's illegal. A OEM version is designed to be installed on a new computer, not on a computer with an existing operating system, so you can install Windows from there but you should know that's illegal, so Apple doesn't support it. To do this legally, you have to get a full Windows 7 disc version and use it to install Windows.
    If you need the steps to install Windows on the MacBook, read > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

  • Can I use my old battery & power cord with my new machine?

    Hiya everyone,
    I recently trashed the screen of my iBook bought in Sept 03 (by spilling water on it.) I've now bought a new one, and as the battery and power cable from my old machine are still fine, and as I could do with a spare of each, I just wanted to check it would be ok to use them with my newer machine.
    Both machines are 12 inch iBook G4s, the only differences I can think of are as follows:
    Old machine:
    30GB hard drive
    1 GHz
    256MB ram
    New machine:
    80GB hard drive (I had it customized)
    1.33GHz
    512MB ram
    I'd appreciate knowing whether my old power cord and battery can be used with my new machine, so if anyone could answer my question, I'd be most grateful. Thanks everyone.

    Hi Charity,
    Yes, you can use both. They have the same specs.
    John

  • Can I use my old iPhone AC Adapter with my new iPad mini

    Just bough myself a new mini retina but was wondering if I could use my old iPhone 4 AC power adapter with it i.e. plug the new lightining to USB to AC Adapter.
    The iPad's power adapter is a bit bulky and anything so I don't end up taking a hundred power adapters on holiday tomorrow!
    Looking at the details they say:
    Old charger:
    100-240v ~ 50/60Hz 0.15A
    Output 5V == 1A
    New charger:
    100-240v ~ 50/60Hz 0.45A
    Output 5.1V == 2.1A

    Another option is that you can take ONLY the iPad mini's 10W charger with you instead of the iPhone's 5W charger. It's not that much bigger than the iPhone's 5W and will safely charge BOTH devices. It's really not recommended (& not considered compatible by Apple) to use the 5W charger to charge devices requiring a 10W or 12W charger. Yes, as was mentioned above, you CAN use the 5W to charge the mini Retina. It will take longer and the charger will likely generate more heat. Personally, I'd just take the 10W charger. It's safe and compatible (officially by Apple) with both your iPhone 4 and the iPad mini Retina.
    Compatibility for 5W charger: (scroll down to compatibility)
    http://store.apple.com/us/product/MD810LL/A/apple-5w-usb-power-adapter
    Compatibility for 12W charger (10W is not listed) (scroll down to compatibility)
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=3c

  • Can I use my old iPod 3G dock with my new iPod Touch

    I just got an iPod Touch, and I am wondering if there are any reason why I shouldn't use it with the old dock that came with my iPod 3G in 2004. It seems to sync and charge without any problem, but I'm wondering if it could cause physical damage because it's not designed to support that shape, or if there's any other potential issues. The iPod Touch came with an adapter, but it doesn't fit my ancient dock.

    I do not understand why a 2G Touch would not charge from an AC connector. I am charging mine with the AC connector which came with my iPod Photo. That may have been the last iPod to include the charger with the device. But yes, it charges the Touch just fine. However, my Bose dock does not work with the Touch at all. I understand that it would not be able to charge it, but I can't even play through it. Two other docks I have are the same EXCEPT that both of them have an auxilliary input and I can play the Touch through a cord going into that input, lying down of course, not in its dock.

  • Hi, can I use my old hi-fi speakers with airplay? And will the quality still be good?

    Hello. I want to replace my old kitchen radio / CD. So I'm thinking of streaming my music. And then I wondered, will I be able to use my old hi-fi speakers? And will the quality be as good as my cds?

    Old hi-fi speakers are not AirPlay compatible. The speakers must be able to stream via your Wi-Fi network. Hi-Fi speakers are too old for that.
    Your iMac must be a mid 2011 or newer running v10.8 Mountain Lion or later to use AirPlay >  About AirPlay Mirroring in OS X

  • TS2634 Can I use my old ipod camera connector with ipad [3]? I keep getting accessory not supported message

    I have tried to use my old camera connector and it doesn't work. many posts indicate the new ones don't work either.  Anyone know if the USB camera connector would or should work with my ipad and my rebel T2i camera?  Would buying a new connector work?
    Thanks.

    What do you mean by "old camera connector"? Do you mean the one that was put out years ago for the iPod? No, that doesn't work. The current Camera Connection Kit works just fine.

  • Can I use my old ipod camera connector with ipad [3]? I keep getting accessory not supported message

    I have tried to use my old camera connector and it doesn't work. many posts indicate the new ones don't work either.  Anyone know if the USB camera connector would or should work with my ipad and my rebel T2i camera?  Would buying a new connector work?
    Thanks.
    I bought a new one and it works fine with my ipad !

    What do you mean by "old camera connector"? Do you mean the one that was put out years ago for the iPod? No, that doesn't work. The current Camera Connection Kit works just fine.

Maybe you are looking for

  • Retrieve and Display Archivelink document in Portal

    How can I display an archivelink document in the portal.  For example,  in travel management module, I have linked images to the trips.  On the portal I want to display these images.   When I use URL, does not work in webdynpro.  When I use FM:  SCMS

  • Could you help on Hospitality services

    Hi Friends, As our client is going to implement SAP in their medical services unit. Could any one send me the organizational structure/ chart of accounts list for hospital. Regards, Suresh

  • Passing the path name of a sequency

    Hello, I'm trying to pass the application path. If for example my sequence is installed at c:\test\sequence.seq, I could do this as followed in visual basic : App.Path & "\sequence.seq". Here App.Path would contain c:\test. Is there a way I can do th

  • Displaying TIF with JIMI

    I'm trying to display a TIF file using JIMI. I'm getting the file in through a Byte[] and converting to image and then adding the image to a JimiCanvas, but its not displaying at all. Heres my code so far:        //Receiving                 byte[] iA

  • Connect to twitter

    Hi, we are trying to do a POC using twitter APIs. But I am getting the below error when I try to connect to twitterfrom my web application, i guess it is because SAP AS of some proxy settings. Can anyone of you please help me regarding this? Error I