Can i use my old round airport extreme as a WiFi extension?

i have my new airport extreme plugged into the modem via ethernet and wish to extend its WiFi network in my house using the older round airport extreme.
is this possible, and if so how do i configure this?
thanks all - T

It will depend on if this "older round" AirPort is an 802.11b or 802.11g model. If it is an 802.11g version, then yes you could use it to create a WDS extended network.

Similar Messages

  • Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

    Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

    Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

  • Can I use my old AIr Port Extreme with my new Mac Pro with Lion installed? It has worked well with the G-4 that I'm replacing.

    Can I use my old Airport Exteme with my new Mac Pro with Lion installed? It has worked well for years with my G-4.

    I'm smarter now. It worked fine.

  • I'm buying a 4s tomorrow, can i use my old 3gs as an itouch with wifi for my kid?

    I'm buying a 4s tomorrow, but i was wondering if i can use my old 3gs as an itouch with wifi for my son to use?

    Yes of course, that is possible.
    The iPhone works just like an iPod Touch if you don't insert a SIM card. It will just display "No SIM" instead of the signal bars.
    The "Phone and Message Apps" will still be visible, but basically the phone won't call or text anyway, because it lacks the SIM card.
    Best Regards

  • Can't update windows 7 service pack 1, can I use windows 8 for AirPort Extreme on my laptop?

    I need help! I'm trying to set up AE with 3 laptops, a desk top, an ipad and two iPhones! Got the software downloaded onto all but one laptop. My laptop won't configure windows 7 service pack 1 so the AE software won't install. I've tried all Microsoft fixes and still nothing. Any ideas? Can I upgrade to windows 8 and proceed or can you tell me how to get this computer to configure properly?!

    Hey Me little
    You can set it up using the AirPort Utility app for iOS. It has the ability to set up the AirPort Extreme for you.
    AirPort Utility
    https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Can I use a second generation Airport Extreme to extend my Time Capsule network?

    I have a second generation Airport Extreme (circa 2009?) and am thinking of buying a Time Capsule. Can I use the Extreme to extend my network?

    Yes. Note; however, you won't be able to extend the 802.11ac mode of the new Time Capsule. Also be aware that the 2nd generation Extreme did not provide for simultaneous dual-band operation. That would mean that you will only be able to extend either the 2.4 or 5 GHz band, not both at the same time.
    ... so it can work in a limited fashion.

  • Old round airport extreme, airport admin utility v4.2, and ps3

    i need to open tcp and udp ports to run my ps3. i need to open ports 80-50,000 and apply them to ps3. in my port mapping, i only see public and private ports; it doesn't say udp or tcp.

    nealefarmer, Welcome to the discussion area!
    Both UDP and TCP ports are opened when you map/open the port.

  • I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

    I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings?  I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

    1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
    As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
    2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
    You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
    ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
    3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
    Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

  • Can I use an old Airport Extreme as an extender with a new Airport Express

    Hi All,  I have Verizon Fios and the data line runs into my bedroom.  I purchased a new Airport Express today to replace the Airport Extreme (from 2006).  Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there).  I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible?  If so, how do I set it up?

    Can I use the old Airport Extreme as an extender
    Is this the "round" or "dome" shaped AirPort Extreme?
    If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
    However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
    In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
    f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do.

  • Can I use my old AirPort Extreme to extend my network?

    I recently replaced my year-old AirPort Extreme with a Time Capsule. The TC setup was the easiest ever, and it actually asked if it was replacing the AirPort and used the old settings, network name, et al. Had it up and running in five minutes and all computers and devices attached to it without any changes necessary.
    So now that I've got this AirPort, I'm wondering if I can use it like an Express and put it into the farthest reaches of my house to extend my network and attach it to my new Apple TV. I also have an old AirPort Express which isn't the 'n' model. What to do?

    So now that I've got this AirPort, I'm wondering if I can use it like an Express and put it into the farthest reaches of my house to extend my network and attach it to my new Apple TV.
    Yes, you could use the 802.11n AirPort Extreme Base Station (AEBSn) to extend the wireless range of the new TC. Whether or not, it will be successful, will depend on both at distance you are trying to cover and what form of Wi-Fi obstructions (walls, ceilings, floors, etc.) there are between the two routers.

  • If i purchase a new airport base station can I use my old airport extreme 802.11n (3rd Gen) as both an extender of my wife for multiple iphones and as a router?

    I operate an old airport extreme base station 802.11n (3rd gen).
    There are 4 iphone5's and 1 iphone4 on my network along with 2 laptops running 10.6.8 and 10.7 respectively as well as two desktops with the same configurations as the laptops.
    I get a sense that the iphones may/will be useless the new airport.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    Thank you.  

    I get a sense that the iphones may/will be useless the new airport
    They will work fine with a new AirPort base station. You can use an iPhone or iPad to set up and configure the new base station. If you want to use a Mac to set up and configure the new AirPort, it will need to have at least Lion 10.7.5 installed. Mountain Lion 10.8 or Mavericks 10.9 could be used as well.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    You can use the older AirPort base station to extend the wireless network. No updates will be needed to your iPhones or Macs.

  • My daughter is using old round airport at college. I set it up without protection. I have an old iBook and I understand I can use that to set the passsword. But I can't seem to figure out where I can set the it?

    My daughter is using old round airport at college. I set it up originally without password protection because my macbook was too new to recognize the old style airport. I have an old iBook and I understand I can use that to set the passsword. But I can't seem to figure out even using the  Airport admin how to establish a password.  Any suggestions?  Thanks.

    If it even has that built-in, you would configure it using Airport Utility. It would likely be in the Wireless configuration for first turning on security and then setting the required password. For Macs you should use WPA Personal if the option is present.

  • Can I boost the DSL signal using my 1st Generation Airport Extreme or Express? Also, can I get wireless printing?

    Can I boost the DSL signal using my 1st Generation Airport Extreme or Express?
    I just moved into a house where they have ATT DSL and it is really slow in my room.  I am hoping that I don't have to purchase a booster and I might be able to use my Airport Extreme or Express to boost it.  I don't think they want my Extreme as their router, though.  They are PC.
    I am also hoping that I can set up a wireless printing situation in my room using the Express or Extreme.
    I am running 10.4.11 on my old MacBook Pro laptop, 10.5.something on my old desktop (MacMini).
    Thanks for any help ahead of time,
    Carole

    Can I boost the DSL signal using my 1st Generation Airport Extreme or Express?
    I just moved into a house where they have ATT DSL and it is really slow in my room.  I am hoping that I don't have to purchase a booster and I might be able to use my Airport Extreme or Express to boost it.
    Unfortunately, this won't work especially if you want the connection between the routers to be wireless. The two are just not compatible for configuring an extended network. However, it could work if you can have them interconnected by wire. In that case, you could configure them into a roaming network.
    I don't think they want my Extreme as their router, though.  They are PC.
    This shouldn't be an issue as the AirPorts support wireless clients regardless of which operating system they are running.

  • What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2  modem and I can't get the configuration working. What modem does Apple recommend?

    I am having problems setting up airport extreme.
    What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+  modem and I can't get the configuration working. What modem does Apple recommend?

    Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
    http://www.actiontec.com/support/product_details.php?pid=41#q27
    Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
    The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
    The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
    If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
    So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

  • How can I use my old AirPort Express?

    How can I use my old AirPort Express (the one that plugs right into the wall without a power cable) to stream music to a stereo when I am using the new Airport Express?  The AirPort Utility 6.1 will not recognize the old AirPort Express.

    Apple does not make it easy for you to use an older device when they want you to buy newer devices.
    See this link for tips on how to install a version of AirPort Utility on Mountain Lion that will allow you to configure your older Express:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
    This is not supported by Apple, so it is your decision on whether you want to move forward with this. It works fine for me, but I cannot guarantee that it will work for you, nor offer support if you have difficulty.

Maybe you are looking for

  • Error in reimporting a web service model

    Hi All, I'm using webservice model in my project. since few changes has been done in the webservice i tried to reimport it, for that i have deleted old model. When i try to reimport same web service model its throwing an exception "Invalid WDSL or WS

  • Replication of Business partner and the Sales document from CRM to R/3

    HI All ,     I am completely new to this CRM technical , I need some technical document on how can I replicate BP and sales documents from CRM  to R/3 through CRM middleware . Please help me out in this regard . Regards Debasri Sarkar

  • Error in tax summary report

    Hi everybody, I noted a wrong amount in tax summary report in field "Credit from previous month" in SAP B1 Version 8.8 PL18 : the credit calculated by SAP is incorrect (higher) than credit from previous month report. This field is not editable and I

  • Email display

    How do I change the way my emails are displayed ? Currently they are in two columns butI prefer to see my emails displayed in 3 columns Email addresses on left - list of incoming mails in middle and then content of highlighted mail in right pane

  • Why am i getting a "prohibited" symbol when trying to use a brush to paint on an inverted mask?

    I am using CS6 and I crated a layer mask to paint on with a scatter brush but for some odd reason I am getting a prohibited symbol whenever I hover the brush onto the canvas making it so I cannot paint! How would I fix this? None of my layer are lock