Can I use my router as an adapter?

I want to use my router as a wireless adapter for my dvr. Can I do this? And if so, how? My primary dsl modem/router is in a seperate room and I really don't want to move it into the living room or buy a gaming adapter for the dvr. Please help.

Considering you have WRT54G, you may want to explore DD-WRT firmware which can be setup in Client Bridge configuration. I do not believe Linksys firmware supports that configuration.

Similar Messages

Can i use one router connected to my cable modem and another....

can i use one router to connect to my cable modem them have another (not connected to a modem) and a wireless reciver so i can plug my xbox 360 into it?

Yes you can do that ... but you need to configure the computer connect to the Router using Cable ....
Afterwards ... you can work on mutiple computers ...

I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket.

Can I use custom query in DB Adapter with Polling

Hi All,
I am getting problem while using db adapter with polling. Can I use custom query in db adapter with polling.
I am using 2 tables; table 1 and table2
Structure of table1 is as:
File_name
Batch_id
Creation_date
Status
Structure of table2 is as:
Batch_id
Employee_ID
Last_Name
First_Name
Middle_Name
Group_ID
Site_ID
Dept_Num
Report_id
I have to use below query while polling to table1
Select count(*) as NOSEXP, Report_id
from table1, table2
where table2.batch_id =
table2.batch_id
and table1.Status= 0
group by Report_id;
I mean, when I use DB adapter to poll table1, I have to use above query.
Can you Please suggest on this.
Thanks in advance.

I will check for existance not based on Primary key but based on three other fields in the table. I think , by default DB adapter configured for MERGE checks for existance based on PK. Can we change the Primary Key in the mapping file after the DB adapter is configured. In that case , will it check for existance based on the fields , I mention.
Edited by: user12020809 on Sep 16, 2012 6:08 PM

How can I use the newly purchased AV adapter in IOS 5.01

How can I use my newly purchased AV adapter in my iPad2 which is using IOS 5.01

As per > iOS: About Apple AV Adapter compatibility, you need to update your iPad to iOS 5.1.1 which is the latest version

HT4327 Dear Sir can i use Apple 10W USB Power Adapter for "iphone 4S"

Dears
1- Can I use Apple 10W USB Power Adapter to charge iphone 4S or it will affect battery performance ?
2- for how long i can use iphone 4s for internet access using 3G ? average ?
Thanks for fast reply

The apple charger is rated 100V to 240V, 50/60 Hz. You can use it in any country.

HT4341 Can I use the 5w usb power adapter for iPad mini/ iPhone 4 in 220v with an adapter?

I will be traveling to Peru and have an adapter for the different prongs there, can I use the 5w usb power adapter that came with my iPad mini, or do I need to buy a converter as well for t their 220v?

The apple charger is rated 100V to 240V, 50/60 Hz. You can use it in any country.

Can i use my iphone 5 wall adapter to charge my i pod nono 7 generation

can i use my iphone 5 wall adapter to charge my ipod nono 7 generation

Hello, cjm111.
Thank you for visiting Apple Support Communities.
You can use the Apple USB power adapter to charge your iPod nano.
iPod nano: Charging the battery
http://support.apple.com/kb/ht3215
Cheers,
Jason H.

Can I use my iPhone 5 charging adapter to charge my iPod Nano?

Can I use my iPhone 5 charging adapter to charge my iPod Nano?

Yes, you can. It is most certainly compatible. Check it out here...
http://store.apple.com/us/product/MD810LL/A/apple-5w-usb-power-adapter?fnode=74

Can we use FILE IO in File Adapter ? If not, Why?

Hello,
I want to clarrify one important issue of FIle Adapter.
Can we use FILE I/O in case of File Adapter to process the files.
PLease explain me with a reason and a sample example.
Thanks,
Soorya.

I think you can handle File IO in Java Mapping by using
public void execute(InputStream in, OutputStream out)
// Here You can desired the output from source XML structure by using SAX/DOM parser to Target XML file.

Having Trouble Connecting To Xbox Live using my router and wireless adapter.

Okay, so this is kinda long but I'll try and speed through. Recently I moved from my old place to a newer place (larger) and before, my old spot worked perfectly, no troubles. Now, eversince i got my internet cable service re-hooked up I've had problems. My internet is fine, that's not the problem. It's my xbox live for my 360. My cable guy pretty much set up my living room with the main router and not my studio office which I keep my 360 in. Instead he told me it would be much easier to just go out and buy a wireless adapter for my PC to recieve the signal from my living room off the main family computer. Well, went out and bought a $80.00 wireless adapter top of the line and it works perfectly, I get the internet really fast. Problem is, my 360 will not connect now. It always says DNS failed. Well here's the problem. I have a Linksys router in my studio office that sits on top of my PC that i have connected to the ethernet of my PC, then in the 2nd or 1st port i have my 360ethernet wire connected to my xbox360. Still it says DNS failed. Shouldn't my router be getting the signal from my Wireless adapter that it's receiving from the living room? It's connected through the same computer yet it doesnt connect. It finds my I address, and it finds the network adapter yet it always fails my DNS. I've tried evern switching the xbox360 ethernet to the main ethernet port on my pc and that just makes me fail the IP address test. I need help guys. My wireless adapter for the pc is a Belkin but my router is a linksys and not sure if the 360 just doesnt recognize it or not. Is there settings I'm missing or something? Please help!!!
The Burninator...

On your 360 if u getting an error msg DNS failed,you can login to your router setup page and go to status tab, not the Static DNS1 and DNS2 numbers and u can give a static dns to your 360. its will resolve ur issue.

PI7.11 Can I use Java proxy on Advanced Adapter Engine ??

To:PI Specialists
Now I m planning to use Java Proxy on PI7.11.
and I want to know Java Proxy can act on AAE as local processing.
I wonder that Java Proxy do not connect to adapter engine but to integration engine.
If it connect to integration engine I ll not to use Java Proxy on AAE...
Please teach me about Java proxy will do on AAE....
Naoki Kurihara

Now I find out we can't use Java Proxy on AAE....
Please check this pdf page 12.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?quicklink=index&overridelayout=true

Can i use thinkpad X1 with 65W adapter?

just got X1 and it came with 90W adapter, which is bulkier than 65 W.
i think it came with 90W cuz of that rapid charge feature.
i have 65 W adapter from my other thinkpads. can i use it rather than 90W on my X1?
Other than that rapid charge feature, will i see any decrease in performance or other problems, such as it becoming
a fire liability or something?

Many wall charger are due voltage bu not all. Look at the small writing on the wall charger and if it says 110 to 240 volts or a similar range then you only need the adopter to match the receptical.

Can you use the I pad power adapter with the I phone 5 lightning cord?

Can you use the I pad or I phone 4 power adapter with the I phone 5 lightning cord to charge your I phone 5 without damaging it?

Yes, the iPad charger has more wattage so it would charge your iPhone faster then the square iPhone charger.

Can i use another router to extend my wireless network of my airport extreme?

i have a billion router (moddel BiPAC 7300W) I just got myself the airport extreme, i want to use the extreme as the main router and extend the network using the billion router.
steps i have followed on the extreme is as follows:
INTERNET
connection sharing: Distrobute a range of IP addresses
cofig IPv4:set to my home network range(manually) - ip,subnet,router,dns
DHCP
access control: mac address of billion router set to all day every day
steps i have followed on the billion router:
disabled NAT
disabled DHCP
ethernet address: same range as extreme ip, actual ip op extreme is xxx.xxx.xxx.254, on billion xxx.xxx.xxx.253
disabled RIP
set wireless mode to 802.11b+g+n
channel id: auto
channel width:20/40mhz
disable wps
disable vmm
Wireless Distribution System (WDS) - added the 3 mac addresses the utility displayed, 5ghz and 2.4ghz and also the ethernet.
restarted both routers, not picking up all the devices connected to the network.
can any one please help me?

i want to use the extreme as the main router and extend the network using the billion router.
Unfortunately, WDS was never adopted as an official standard in the industry, so very few routers from other manufacturers are known to be compatible with Apple's WDS settings. The known devices are as follows:
Belkin F5D7230-4 and F5D7231
BT Voyager 2091 or 2100
Buffalo WGR-G54
Linksys WRT54G or WRT54GS (through version v4)
Netgear WGR614 v6
Thompson 585v6 wireless router (40 bit WEP works but stronger encryption does not)
connection sharing: Distrobute a range of IP addresses
You would not use this setting unless your service provider has furnished you with a specific range of IP addresses to use for your devices. Is that the case?
Normally, when the AirPort Extreme is functioning as the "main" router, the setting for Connection Sharing is set to "Share a public IP address"
Wireless Distribution System (WDS) - added the 3 mac addresses the utility displayed, 5ghz and 2.4ghz and also the ethernet.
You indicated that you had configured things this way on the Billion router. But, you did not indicate whether you had set the Wireless Mode for the AirPort Extreme to "Participate in a WDS Arrangement".
If you have not already done so, this might improve your chances of establishing a connection between the AirPort Extreme and Billion router for the WDS.
To access these settings on the AirPort Extreme, you would need to open AirPort Utility and click Manual Setup. Then click the Wireless tab just below the row of icons. Change the setting for Wireless Mode to "Participate in a WDS Arrangement".
Note....you may need to hold down the option key on your Mac, (or it might be alt or control if you are using a PC) to display the WDS setting.
Once you do this, then a WDS tab will now appear next to the Wireless tab. Click on the WDS tab to set up the AirPort Extreme as the WDS Main and enter the MAC address of the Billion router.
As I mentioned previously, it is extremely unlikely that the Apple and Billion devices will be compatible for WDS, but probably worth a try....since you never know when something just might work.
Even if it does....WDS operates only at "g" wireless speeds, so you will lose any of the faster "n" speed capabilities of the AirPort Extreme in this type of setting.
Please post on your results.

Can I use my router as an adapter?

Similar Messages

Maybe you are looking for