Can I use my Samsung Wall USB charger to charge iPod Nano (6th gen)? (output is 5.0V, 0.7A)
Can I use my Samsung Wall USB charger to charge iPod Nano (6th gen)? (output is 5.0V, 0.7A)
http://www.amazon.com/Samsung-Charger-Detachable-ETA0S20JBE-ECC1DS2UBE/dp/B004R0 5W1G
My biggest concern is that it will fry the circuitry. I don't know what the Amp output is on the Mac-branded wall charger, but I think that USB 2.0 usually only goes up to 0.5A.
Quick answer is: You can if it works, but it is not recommended.
Hope this helps.
-Julian
Similar Messages
-
I have no problem charging the battery thrugh the USB 2.0 port on the computer, but using the firewire power adaptor from my old iPod doesn't seem to work. I also tried using the docking station without luck.
Do I need a completely different power adaptor to charge my nano? Or am I doing something wrong?The problem may have something to do with both the cable and the voltage. Older Nanos run on 12V DC, and newer Nanos on 5V DC. That wouldn't necessarily be a problem (pushing 12V into the device would charge it faster, although it would shorten battery life over the long haul) except that Apple, supposedly also changed the pins designated for charging. Not sure of the exact pin number, but I think #19 is now the 5V charge pin for new Nanos, while in older Nanos it was (I think) #23 or something like that for the 12V charge pin. All in all, the advice below was correct, you can't use an older Firewire iPod cable on newer iPods. The only reason I know about this whole voltage and pin problem is because the new Nanos won't charge while connected to the iPod cable in a new Mercedes Benz - they play fine, but won't charge. Mercedes uses a cable with the old pin set up, and my Nano 6th gen won't charge.
-
do you need a converter to charge Ipod Nano (5th gen) using a non-Apple wall charger/adapter plug in Switzerland? or is the Ipod Nano dual-voltage?
None of the iDevices are multi-voltage themselves...the chargers from Apple are all 110-240 volt. You will have to look at the non-Apple charger you have and see if it says it handles 110-240 volts. Most made today are capable of that range, or they would have to make a different item for each country.
All you probably need is a plug-pin converter, can find those in the airport, at least in Zurich, don't know about Geneva. -
My ipod nano 6th Gen. bought 5th Jan 2011 suddenly cannot be switched on. Last use is just 3h ago and everything went perfect til then Even shows no reaction when connected to charging cable. Anyone who can help?
See the Will not turn or screen remains dark section of this Apple support document to start troubleshooting the issue.
iPod nano (6th generation): Hardware troubleshooting
B-rock -
There's this time that my ipod nano 6th gen stopped from being recognized on any computer, i tried all trouble shooting stuff but none of them worked, can you give me any solutions? i'm pretty desperate.
Are you using a Macintosh or Windows?
-Zeph -
when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please
Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk? It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks -
I have read numerous posts online about the same problem but can't seem to sort mine out. I've tried changing power leads, restoring back till an older version of itunes, resetting the ipod, restarting my computer and tried every USB port in sight but still nothing.
I have plugged a friends ipod touch into my computer and it connects and appears in itunes fine, but with mine it wont stay connected long enough for me to try and restore anything with it on itunes its literally a 1 second interval between connected and ejecting. I thought maybe it could be the connection terminal on the ipod but i have had it connected to a wall charger and xbox with it staying connected with no problems.
I am running windows vista on the computer and the nano was previously synced to a different itunes could this be the problem and if so how do I go about fixing it??
ThanksI too am having this same issue. I connect my iPod nano (6th gen), and it appears for anywhere between 1 to 10 seconds and then automatically ejects.
I'm running a macbook pro with OS X 10.6.8 and the most up to date version of iTunes. The strange thing is that the nano works fine on my old macbook from 2007; which also has the most up to date iTunes but is running OS X 10.5. Another thing is that my iPod touch works just perfectly on my MacBook Pro.
I have read up on a lot of forums, and have found little help for those who are running into this problem on a Mac. The majority of fixes are for PC. Any help would be greatly appreciated. -
My ipod nano (6th gen) is no longer identied properly in itunes. I have followed all steps in the troubleshooting guide (uninstall and reinstall itunes several times, Apple Mobile Device running ok, verified USB port runs) but the issue is still not resolved. What can I do?
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
I recently purchased an IPOD NANO 6th gen. I have a large library of music on my PC (NON MAC). How can I sync my music library from my PC to my IPOD NANO. I use Windows Media Player to hod my music files.
Install iTunes and import the Windows Media Player library to it.
(63922) -
i have recently recieved an ipod nano 6th gen after the 1st gen recall, and out of nowhere it just started flashing the apple logo when connected to computer. Help please!
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
Is the ipod nano 6th gen capable of sending signal to wireless headphones. I am 57 and do not like earphones and wire. Would like to get the nano. I understand the iphone 4 can use wireless headphones, but i can not wear it on my wrist like a watch. Thank you. techie mawmaw.
What is your price range. I know exactly what you are talking about. I always used headphones while mowing and I used to runt he cord through my shirt to prevent it from getting caught on the steering controls of the mower but one day the cord came untucked form my pants pocket ripping the cord straight out of the headphone itself. They were nice Sennheisers to!
I ended up replacing them with these http://en-us.sennheiser.com/wireless-bluetooth-headset-headphone-smart-mobile-phone-stereo-mm-500-x they are pricey at 330 but will last you many years if they are taken care of. Sennheisers are excellent quality. Best Buy oddly doesnt carry the 500 series they have the 450 and 550 but not the 500. Completely ignore the Beats by Dr. Dre they are horrible for the price point they are!
The noise cancellation is great and they are very comfortable. Like you I dont care for earbuds as I have tried many and they all hurt my ears and on-ear style would eventually start hurting my outer ear but these are very comfy! -
IPod Nano 6th Gen can't save my run
anyone can help me with this?
i'm using iPod Nano 6th Gen with nike plus. everytime i hit end workout my ipod is rebooting itself and can't save my run however when i jack my ipod to my treadmill that problem doesn't occur. i try to ask for help to the nearest ibox in town but unfortunately they're not helping AT ALL!!! fyi the software is updated from time to time and currently using version 1.2PC and i have 13.3GB available
so anyone has experienced this kinda problem please let me know how to fix this. thank youafter i tapped on the end workout, it showed the apple logo. I waited for about 15-20 secs and it went back to the main screen with the icons
then i checked my history go to workout totals and it showed the apple logo (again) and went back to the main screen (it means it's not recorded right?)
thanks for helping -
HT1364 how can i download from my itunes list to my ipod nano 6th gen ?
hi can anyone out there help me i purcheased a song from itunes it down loaded to my itunes list on laptop but i cant download that song onto my ipod nano 6th gen even thoe it reconises my ipod as before i use to just plug my ipod into the laptop and select down load and it would atomaticly down load song onto my ipod now it wont do that have anyone got any idea why please ?
It works the same way it has always worked.
Connect the device to the computer.
Select the content desired to sync.
Sync.
There is no "download" option when an iDevice is connected as content does not get downloaded to devices. Content gets downloaded from iTunes to the computer.
Try using the correct terminology and possibly reading the User's Guide... that may allow you to figure this out on your own or ask an intelligent question to get a resolution. -
My ipod nano 6th gen wont charge, turn on or respond to anything i have done. I have tried the troubleshooting and nothing works. I have droped it once but it work for about a month after and i havent wet it. any tips would be much apriciated! thanks
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?
Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen
Maybe you are looking for
-
How to get information about Machine Statistics
HI I have program written in java.At one part of program i want to add such a function which include following functionality 1-What is Processor state 2-How much memory Used and how much is total memory 3-How much thread my program is handle with as
-
HI ALL am using the code below but am getting an "ERROR CALLED ON VALUE REQUEST FOR" should be followed by <parameter> or <select-option>-LOW / <select-option>-HIGH.please help and also please mention the changes if needed with regards vijay at selec
-
Problems in the installation of SAP NetweaverJava
Hi I`m new in the SAP world and in the stalation of the SAP Netweaver Java aplication and in the installation apears this error ¿somebody can help me? ERROR 2010-02-08 23:29:11 CJS-30051 Cannot insert a key value pair into the secure store fails; se
-
Flash player 10.0.32.18 won't work.
I was on vacation for 3 week and havent used my Laptop in the entire time to go on the internet so when i was back i had to install the new flash player version 10.0.32.18 to watch movies on Youtube etc. Well i did and it says: Installatie is voltooi
-
Customer bounced/NSF check
How do I void a customer's bounced check that has been deposited with this scenario... The check was deposited 8/28 and then my bank debited my account 9/2 because the check was insufficient. I try to cancel the deposit but the date goes back to the