Can I use my WRV200 (VPN Router with Range Booster) as a Repeater?

Hello gurus
I have a unsecured wireless signal coming to my apartment.  Can I use the above device to capture this signal and give me a wired port (to plug a network cable) for my VOIP phone?
Thanks
Fouwaaz

The Device doesnt have the functionality to be repeater. The device that you need is WET200 it is a wireless bridge that has a 4 ports on the back. Below is the Link for the Device http://www.cisco.com/en/US/products/ps10053/index.html 

Similar Messages

  • Can I use the WNDR3800 Netgear router with OS X 10.4.11?

    I just got a WNDR3800 Netgear router and I have not been able to get it to work. I have a PowerPC G5 iMac running OS 10.4.11 . The system requirements on the box includes Mac OS, no version specified. So I assumed it would run with my OS version. Am I wrong?

    It should work fine with a wired connection, without complications (unless you are intentionally using special settings on the router).  Make sure it is set up, as Steve mentioned, with the standard Configure Using DHCP setting in System Preferences Network pane (for Ethernet).  That's the default setting, so you should not need to change anything.
    Also, your cable should be at least Cat-5e quality.  Cat-5 may work, but the achieved speed may suffer if the iMac and router are both capable of gigabit Ethernet.  Make sure it is not a really old cable.  In any case, be sure to try a different cable, in case the one you have been using is bad.
    Other things to try...
    In System Preferences Network pane, look at the sidebar with the list of network services.  Make sure Ethernet is listed first (at the top of the list).  There is a command to Set Service Order.  I don't remember precisely the procedure for 10.4 (Tiger).  If there is a small gear icon under the sidebar, click it (that's where the command is in the current Mac OS X).  Or you may just need to drag the items on the sidebar list directly, to the order you want.  After the change, click the Apply button.  This setting determines the order in which network services are tried, when you startup and log in.  You want Ethernet to be tried first.  You may want to restart after making a change.
    In the same pane, you can also try removing any network services that you do not need.  Select the item and click the minus sign at the bottom of the sidebar.  You can always put them back later using the plus sign.
    If you keep AirPort on the list, but do not use it regularly, you can try turning it OFF when it's not being used.
    If all of that fails, try setting up a new Location in System Preferences Network pane.  The new location will use default settings as the starting point, so you can try setting up the Ethernet connection again, from there.

  • Can I use my Airport Extreme router with Mountain Lion?

    I purchase my Airport Extreme about 2-3 years ago. My Internet service- Verizon, provides the modem. When I inserted the installation disc that came with the router I got an error message on my laptop saying that the systems were incompatible with one another.
    I looked ror an airport update to resolve this but found nothing.
    Can anyone offer some advice?
    Not being much of a Techie, I'm a bit afraid of just charging in and taking my chances.
    Thanks for the help.

    Mountain Lion has already installed the latest version of AirPort Utility for you.
    Look in Macintosh HD > Applications > Utilities > AirPort Utility.
    You can trash the old installation CD as it no longer useable.

  • HT4628 I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken

    I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken. The problem is happen recently, I have to use an independent wireless card now. Thanks!

    When you enable Internet Sharing in OS X, you are creating a separate sub-net.
    There is no option to allow this to be a simple pass-through from Ethernet to AirPort (or the other way).
    The problem is easily solved by getting an inexpensive wireless router. You can replace your current router OR disable the DHCP server on the wireless router and allow the wireless clients to get an IP address from the current router.

  • What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

    Hi,
    What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
    Ushas Symon

    It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
    Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
    Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
    The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
    your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
    Good luck.

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • Can I use a sata3 hard drive with a late 2009 imac

    Looks liker the hard drive in my five year old iMac is about to go belly up. Was getting hardware errors, very slow startup and Carbon Copy Cloner reported bad blocks during the backup. I want to buy a new HD at a local store and have the Apple store install it. Will they do that and can I use a SATA 3 drive with my older iMac?

    YEs you can use a SATA III drive but the Apple Store will not install it for you. Find an AASP and see if they'll install a drive for you.

  • How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
    Look at this very informative video for the instructions.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • Can I use the Creative Cloud libraries with Illustrator CS5

    Can I use the Creative Cloud libraries with Illustrator CS5

    Hi Ilys Ravel,
    No, Creative Cloud Libraries feature is only available in CC 2014.1 release on-wards.
    Sanjay..

  • My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?

    My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?
    We would like to have all our music, photos, etc. on the iPad - is it best to create a new combined Apple ID for the iPad and simply upload our music, photos, etc. via our laptop instead? Does this not then render the iCloud useless to us?

    And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
    If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install.  Then copy that copy to any Mac you own where you want to install Lion.

  • Can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

    can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

    Yes, if the AirPort Express is set up to create a wireless network that uses the exact same wireless network name as the other router and the same wireless network password as the other router.

  • Can I use my old apple speakers with my new I mac

    Can I use my old apple speakers with my new I mac

    If they are the old clear globe speakers that worked with old G4 models, then no.

  • Can I use my old apple monitor with a new mac mini?

    Can I use my old apple monitor with a new mac mini?

    Probably.  Any information about the monitor?

  • Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

    can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • Can I use ICal 5.0.3 with Mountain Lion?

    Can I use ICal 5.0.3 with Mountain Lion? The new ICal dropped Reminders!

    Reminders App won't print and won't sort, etc with Calendar like it iused to. The old ICal is a better App.

Maybe you are looking for