Can I use OCR for just a single image in a text document?

Hi All
I have a 37page pdf document that is mostly recognised text. i think this document was created in MS word then converted to PDF. I did not make this document.
There are images inserted on some pages that are scans from another document. The document has footnotes, page numbers, title, text paragraphs on the pages with the images i want to ocr. I have already used the highlight an sticky note functions for some of the recognised text and don't want them lost.
I have tried using OCR for the whole document but it doesn't work (renderable error).
Can I use the OCR function just on a selected image within a document that has renderable text for the most part?
thanks.

Read what it says on the ATT page
http://www.att.com/ipad/?fbid=s18K8c1ujw3
 Cheers, Tom

Similar Messages

I created a new library so I can use it for just my music, but now my ipod will only sync to my old library and not the new one I created, even though I'm in the new library when I open itunes. Any solutions?

I created a new library so I can use it for just my music, but now my ipod will only sync to my old library and not the new one I created, even though I'm in the new library when I open itunes. Any solutions?

The point is that there are four i product users for one computer in my house, and not everyone wants the same music on their device. Like I said before, the ipod is not syncing to the new library even though I plug it in when the new itunes library is pulled up. It keeps syncing to the old library...

Can i use the iphone just for the ipod and wifi without simcard

can i use the iphone just for the ipod and wifi without simcard

Forgive me as I did this a while ago, but heres how I remember it happening:
1. I wiped it
2. I selected "Set up as New iPhone"
3. It registered
4. It was activated, and was an iPod Touch basically
5. I sold it, so I can't try it. I now use Verizon, so no SIM, although I do have an original iPhone (retired), but can't find my old SIM.

How can i use AME for the new OAF page.

Dear all,
I have developed a new OAF page and registered under Employee Self Service.
How can i use AME for the approval process.
Appreciate your ideas?
zamora

I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
Let's look at the workflow and putting an OAF Page as notification.
As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
Hope this gives some idea.

Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
Thx

I've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence?

Command button opens mission control, so I can't use it for other shortcuts

I have only had my macbook air for a few weeks, and I think I may have fiddled with settings before I had any clue what I was doing, as now every time I press the command key, it opens mission control, and I can't use command for other shortcuts... What have I done wrong and how do I undo it??? Help much appreciated!

I am having this issue, too, and Keyboard Shortcuts doesn't fix it, as I have not assigned Command to anything. It just states at the bottom "for additional choices press Shift, Control, Option, or Command," but doesn't seem to allow me to change these. Do you know of a way?

Can w use rsync for Business Continuity for Oracle Applications Release12 ?

Hi ,
One of our customer has implemented Oracle EBS R12 (12.0.6) on HP-UX (IA).
Database Tier on a Two Node Oracle Database 10g R2 RAC
Application Tier on Two Node using Shared APPL_TOP with Load Balancer.
They want to implement DR site using Oracle Data Guard (RAC to Non-RAC).
I was referring to Note: 452056.1 +( Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC )+.
In this note its mentioned that:
If you wish to synchronize your concurrent manager log and out files between production and standby, you need to create folders matching to the APPLCSF environment variables for each others......................... For example, set up an rsync job similar to the below example in cron, to run every few minutes.
Can we use rsync for Production systems without any issues? Customer is concerned about using freeware on their Production systems.
Rgds,
Thiru.

Thiru,
Can we use rsync for Production systems without any issues? Customer is concerned about using freeware on their Production systems.You can use it with no issues. Or, you could use any other copy tool to copy those files.
Thanks,
Hussein

Hi, Can I use my CC Team account single app subscription to get indesign cs5?

Hi, Can I use my CC Team account single app subscription to get indesign cs5? I puchased a single app subscription but realized I need an older version, can I deactivate my indesign 2015 and use my monthly subscription to install CS5?

I don't believe CS5 is offered as an option for CC subscriptions, and I don't think any older versions are offered for single product subscriptions. You can check for yourself if you follow the info below and check your CC manager...
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

Can I use Skype for my business?

Hi,
I have a SKype number and been using it for my business for a year already. Today I've received an email from Skype saying that I can't use Skype for commercial purpose. I'm confused because I've seen so many people saying that they use Skype for their business. Here's the message I've just received:
"We have noticed some prohibited usage of your subscription.
We will continue to monitor your account, your calling behavior and your overall activity using Skype. If the prohibited usage still continues, your subscription will be disconnected. You will no longer be able to use or purchase any of Skype’s paid-for products.
The suspension of your access to Skype paid-for products will be permanent and you will be unable to transfer any existing products to a new Skype account, or receive a refund. However, you will be able to continue to make Skype-to-Skype calls and send instant messages.
We remind you that Skype’s products are for personal, individual and non-commercial use only. Our Fair Usage Policy can be found within our term of uses. Our subscriptions cannot be shared or used for commercial gain, such as telemarketing or call centre operations"
Do I have to register for a business account or what? Or what should I do now? This number have been using as my business contact and I can't change it. Please help.

Hello and welcome to the Skype Community.
What type of business are you engaged in?
https://support.skype.com/en/faq/FA34551/what-s-the-difference-between-skype-and-skype-for-business
http://www.skype.com/en/legal/tou/
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Can i use mail for 2 different email accounts?

I use my MacBook as a work computer and a home computer.
I dont really like Office for Mac.
Can I use Mail for work email and home email ( 2 seperate accounts )

Absolutely, you just need to add and setup the second account in the Preferences menu.

How can I use TopLink for querys that have two and more tables?

I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
Thank you for see and answer this question.

You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
Zev.
check out oracle.toplink.expressions.Expression in the 10.1.3 API

How can I use OCCI for oracle8.1.6?

my database is oralce8.1.6 for solaris8.
I want to develop database application by OCCI .
But only oracle9i has OCCI.
How can I do?
Where can I get OCCI ,and how can I use it for oralce8.1.6?
thank you very much!!

OCI is available for all versions of Oracle including Oracle
7/8/8i etc. However it is not installed by default with these
versions. I am assuming that the default 9i installation
includes OCI. You should be able to install OCI for other
versions through one of the development platforms e.g. ProC/C++
etc.

How can i use RTFEditorKit for JTextField.

hi all,
how can i use RTFEditorKit for JTextField.
thanks in advance
daya

Don't cross post. This is a Swing related question and you have already posted in the Swing forum:
http://forum.java.sun.com/thread.jspa?threadID=619619&tstart=0

How can I use Siri for IPhone?

How can I use Siri for IPhone?

Siri only works on the iPhone 4S or iPhone 5. If you have one of those devices, turn it on in Settings > General > Siri.
If you need more info than that, ask in the Apple forums.

How can I use music for ringtones on my iphone 4?

How can I use music for ringtones on my iphone 4?

You can take any MP3 file that it 40 seconds or less and change the file extension to M4R. Then drag it into iTunes. It will appear under Ringtones and transfer over next time you sync,

Can I use OCR for just a single image in a text document?

Similar Messages

Maybe you are looking for